Commission Regulation (EC) No 706/2007 of 21 June 2007 laying down, pursuant to D... (32007R0706)
INHALT
Commission Regulation (EC) No 706/2007 of 21 June 2007 laying down, pursuant to Directive 2006/40/EC of the European Parliament and of the Council, administrative provisions for the EC type-approval of vehicles, and a harmonised test for measuring leakages from certain air conditioning systems (Text with EEA relevance)
- COMMISSION REGULATION
- (EC) No 706/2007
- of 21 June 2007
- laying down, pursuant to Directive 2006/40/EC of the European Parliament and of the Council, administrative provisions for the EC type-approval of vehicles, and a harmonised test for measuring leakages from certain air conditioning systems
- (Text with EEA relevance)
- Article 1
- Subject matter
- Article 2
- Definitions
- Article 3
- EC component type-approval
- Article 4
- Administrative provisions for EC component type-approval
- Article 5
- EC component type-approval mark
- Article 6
- Administrative provisions for EC type-approval of a vehicle with regard to emissions from an air-conditioning system
- Article 7
- Harmonised leakage detection test
- Article 8
- Entry into force
- List of Annexes
- ANNEX I
- ADMINISTRATIVE DOCUMENTS FOR EC TYPE-APPROVAL
- PART 1
- MODEL
- Information document No … relating to EC component type-approval of an air-conditioning system or of a component thereof
- 0 GENERAL
- 9. BODYWORK
- PART 2
- MODEL
- EC TYPE-APPROVAL CERTIFICATE
- (maximum format: A4 (210 × 297 mm))
- SECTION I
- SECTION II
- Addendum
- to EC type-approval certificate No …
- concerning the type-approval of an air-conditioning system or leak component with regard to Directive 2006/40/EC
- PART 3
- EC COMPONENT TYPE-APPROVAL MARK
- 1. GENERAL
- 2. EXAMPLE OF THE EC COMPONENT TYPE-APPROVAL MARK
- PART 4
- MODEL
- Information document No … relating to EC type-approval of a vehicle with regard to emissions from air-conditioning system
- 0 GENERAL
- 9. BODYWORK
- PART 5
- MODEL
- EC TYPE-APPROVAL CERTIFICATE
- (maximum format: A4 (210 × 297 mm))
- SECTION I
- SECTION II
- Addendum
- to EC type-approval certificate No …
- concerning the type-approval of a vehicle with regard to Directive 2006/40/EC
- ANNEX II
- TECHNICAL PROVISIONS FOR THE DETERMINATION OF LEAKAGES FROM AIR-CONDITIONING SYSTEMS
- 1. INTRODUCTION
- 2. DESCRIPTION OF TEST
- 3. TEST EQUIPMENT
- 3.1. Measurement enclosure
- 3.2. Measuring equipment
- 3.3. Gas analyser data recording system
- 3.4. Additional equipment
- 3.4.1. Temperature recording
- 3.4.2. Pressure measuring device
- 3.4.3. Fans
- 3.4.4. Gases
- 4. PRECONDITIONING
- 4.1. General requirement
- 4.2. Preconditioning conditions
- 4.3. Compressor
- 5. TEST SEQUENCE
- 5.1. General requirements
- 5.2. Leakage test
- Figure I
- 5.3. Calculation
- 5.4. Overall results of test
- 6. APPROVAL
- Appendix
- Calibration of equipment for leakage testing
- 1. CALIBRATION FREQUENCY AND METHODS
- 2. CALIBRATION OF THE MEASUREMENT ENCLOSURE
- 2.1. Initial determination of measurement enclosure internal volume
- 2.2. Determination of measurement enclosure background emissions
- 2.3. Calibration and HFC-134a retention test of the measuring enclosure
- 3. CALIBRATION OF THE HFC ANALYSER
Feedback