Directive 2010/75/EU of the European Parliament and of the Council of 24 November... (32010L0075)
INHALT
Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control) (recast) (Text with EEA relevance)
- DIRECTIVE 2010/75/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
- of 24 November 2010
- on industrial emissions (integrated pollution prevention and control)
- (Recast)
- (Text with EEA relevance)
- CHAPTER I
- COMMON PROVISIONS
- Article 1
- Subject matter
- Article 2
- Scope
- Article 3
- Definitions
- Article 4
- Obligation to hold a permit
- Article 5
- Granting of a permit
- Article 6
- General binding rules
- Article 7
- Incidents and accidents
- Article 8
- Non-compliance
- Article 9
- Emission of greenhouse gases
- CHAPTER II
- PROVISIONS FOR ACTIVITIES LISTED IN ANNEX I
- Article 10
- Scope
- Article 11
- General principles governing the basic obligations of the operator
- Article 12
- Applications for permits
- Article 13
- BAT reference documents and exchange of information
- Article 14
- Permit conditions
- Article 15
- Emission limit values, equivalent parameters and technical measures
- Article 16
- Monitoring requirements
- Article 17
- General binding rules for activities listed in Annex I
- Article 18
- Environmental quality standards
- Article 19
- Developments in best available techniques
- Article 20
- Changes by operators to installations
- Article 21
- Reconsideration and updating of permit conditions by the competent authority
- Article 22
- Site closure
- Article 23
- Environmental inspections
- Article 24
- Access to information and public participation in the permit procedure
- Article 25
- Access to justice
- Article 26
- Transboundary effects
- Article 27
- Emerging techniques
- CHAPTER III
- SPECIAL PROVISIONS FOR COMBUSTION PLANTS
- Article 28
- Scope
- Article 29
- Aggregation rules
- Article 30
- Emission limit values
- Article 31
- Desulphurisation rate
- Article 32
- Transitional National Plan
- Article 33
- Limited life time derogation
- Article 34
- Small isolated systems
- Article 35
- District heating plants
- Article 36
- Geological storage of carbon dioxide
- Article 37
- Malfunction or breakdown of the abatement equipment
- Article 38
- Monitoring of emissions into air
- Article 39
- Compliance with emission limit values
- Article 40
- Multi-fuel firing combustion plants
- Article 41
- Implementing rules
- CHAPTER IV
- SPECIAL PROVISIONS FOR WASTE INCINERATION PLANTS AND WASTE CO-INCINERATION PLANTS
- Article 42
- Scope
- Article 43
- Definition of residue
- Article 44
- Applications for permits
- Article 45
- Permit conditions
- Article 46
- Control of emissions
- Article 47
- Breakdown
- Article 48
- Monitoring of emissions
- Article 49
- Compliance with emission limit values
- Article 50
- Operating conditions
- Article 51
- Authorisation to change operating conditions
- Article 52
- Delivery and reception of waste
- Article 53
- Residues
- Article 54
- Substantial change
- Article 55
- Reporting and public information on waste incineration plants and waste co-incineration plants
- CHAPTER V
- SPECIAL PROVISIONS FOR INSTALLATIONS AND ACTIVITIES USING ORGANIC SOLVENTS
- Article 56
- Scope
- Article 57
- Definitions
- Article 58
- Substitution of hazardous substances
- Article 59
- Control of emissions
- Article 60
- Monitoring of emissions
- Article 61
- Compliance with emission limit values
- Article 62
- Reporting on compliance
- Article 63
- Substantial change to existing installations
- Article 64
- Exchange of information on substitution of organic solvents
- Article 65
- Access to information
- CHAPTER VI
- SPECIAL PROVISIONS FOR INSTALLATIONS PRODUCING TITANIUM DIOXIDE
- Article 66
- Scope
- Article 67
- Prohibition of the disposal of waste
- Article 68
- Control of emissions into water
- Article 69
- Prevention and control of emissions into air
- Article 70
- Monitoring of emissions
- CHAPTER VII
- COMMITTEE, TRANSITIONAL AND FINAL PROVISIONS
- Article 71
- Competent authorities
- Article 72
- Reporting by Member States
- Article 73
- Review
- Article 74
- Amendments of Annexes
- Article 75
- Committee procedure
- Article 76
- Exercise of the delegation
- Article 77
- Revocation of the delegation
- Article 78
- Objections to delegated acts
- Article 79
- Penalties
- Article 80
- Transposition
- Article 81
- Repeal
- Article 82
- Transitional provisions
- Article 83
- Entry into force
- Article 84
- Addressees
- ANNEX I
- Categories of activities referred to in Article 10
- 1. Energy industries
- 2. Production and processing of metals
- 3. Mineral industry
- 4. Chemical industry
- 5. Waste management
- 6. Other activities
- ANNEX II
- List of polluting substances
- AIR
- WATER
- ANNEX III
- Criteria for determining best available techniques
- ANNEX IV
- Public participation in decision-making
- ANNEX V
- Technical provisions relating to combustion plants
- PART 1
- Emission limit values for combustion plants referred to in Article 30(2)
- PART 2
- Emission limit values for combustion plants referred to in Article 30(3)
- PART 3
- Emission monitoring
- PART 4
- Assessment of compliance with emission limit values
- PART 5
- Minimum rate of desulphurisation
- PART 6
- Compliance with rate of desulphurisation
- PART 7
- Average emission limit values for multi-fuel firing combustion plants within a refinery
- ANNEX VI
- Technical provisions relating to waste incineration plants and waste co-incineration plants
- PART 1
- Definitions
- PART 2
- Equivalence factors for dibenzo-p-dioxins and dibenzofurans
- PART 3
- Air emission limit values for waste incineration plants
- PART 4
- Determination of air emission limit values for the co-incineration of waste
- 2. Special provisions for cement kilns co-incinerating waste
- 3. Special provisions for combustion plants co-incinerating waste
- 4. Special provisions for waste co-incineration plants in industrial sectors not covered under Points 2 and 3 of this Part
- PART 5
- Emission limit values for discharges of waste water from the cleaning of waste gases
- PART 6
- Monitoring of emissions
- 1. Measurement techniques
- 2. Measurements relating to air polluting substances
- 3. Measurements relating to water polluting substances
- PART 7
- Formula to calculate the emission concentration at the standard percentage oxygen concentration
- PART 8
- Assessment of compliance with emission limit values
- 1. Air emission limit values
- 2. Water emission limit values
- ANNEX VII
- Technical provisions relating to installations and activities using organic solvents
- PART 1
- Activities
- 2. Adhesive coating
- 3. Coating activity
- 4. Coil coating
- 5. Dry cleaning
- 6. Footwear manufacture
- 7. Manufacturing of coating mixtures, varnishes, inks and adhesives
- 8. Manufacturing of pharmaceutical products
- 9. Printing
- 10. Rubber conversion
- 11. Surface cleaning
- 12. Vegetable oil and animal fat extraction and vegetable oil refining activities
- 13. Vehicle refinishing
- 14. Winding wire coating
- 15. Wood impregnation
- 16. Wood and plastic lamination
- PART 2
- Thresholds and emission limit values
- PART 3
- Emission limit values for installations of the vehicle coating industry
- PART 4
- Emission limit values relating to volatile organic compounds with specific risk phrases
- PART 5
- Reduction scheme
- PART 6
- Emission monitoring
- PART 7
- Solvent management plan
- 1. Principles
- 2. Definitions
- PART 8
- Assessment of compliance with emission limit values in waste gases
- ANNEX VIII
- Technical provisions relating to installations producing titanium dioxide
- PART 1
- Emission limit values for emissions into water
- PART 2
- Emission limit values into air
- PART 3
- Emission monitoring
- ANNEX IX
- PART A
- PART B
- ANNEX X
- Correlation Table
Feedback