Regulation No 97 of the Economic Commission for Europe of the United Nations ... (42008X1230(01))
INHALT
Regulation No 97 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of vehicle alarm systems (VAS) and of motor vehicles with regard to their alarm systems (AS)
- Regulation No 97 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of vehicle alarm systems (VAS) and of motor vehicles with regard to their alarm systems (AS)
- Revision 1 — Amendment 1
- PART I — Approval of vehicle alarm systems
- PART II — Approval of a vehicle with regard to its alarm system
- PART III — Approval of immobilizers and approval of a vehicle with regard to its immobilizer
- 1. SCOPE
- PART I
- APPROVAL OF VEHICLE ALARM SYSTEMS
- 2. DEFINITIONS
- 3. APPLICATION FOR APPROVAL OF VAS
- 4. APPROVAL
- 5. GENERAL SPECIFICATIONS
- 6. PARTICULAR SPECIFICATIONS
- 6.1. Protection range
- 6.1.1. Specific requirements
- 6.1.2. Safety against false alarm.
- 6.2. Audible alarm
- 6.2.1. General
- 6.2.2. Duration of the audible signal
- 6.2.3.3. Sound level
- 6.3. Optical alarm — if fitted
- 6.3.1. General
- 6.3.2. Duration of the optical signal
- 6.3.3. Type of optical signal
- 6.4. Radio alarm (pager) — if fitted
- 6.5. Alarm system setting lock
- 6.6. Setting and unsetting of the VAS
- 6.6.1. Setting
- 6.6.2. Unsetting
- 6.7. Exit delay
- 6.8. Entry delay
- 6.9. Status display
- 6.10. Power supply
- 6.11. Specifications for optional functions
- 7. OPERATION PARAMETERS AND TEST CONDITIONS(6)
- 7.1. Operation parameters
- 7.1.1. Climatic conditions
- 7.1.2. Degree of protection for installation
- 7.1.3. Weatherability
- 7.1.4. Electrical conditions
- 7.2. Test conditions
- 7.2.1. Operation tests
- 7.2.2. Resistance to temperature and voltage changes
- 7.2.3. Safe operation after foreign body and water-tightness testing
- 7.2.4. Safe operation after condensed water test
- 7.2.5. Test for safety against reversed polarity
- 7.2.6. Test for safety against short-circuits
- 7.2.7. Energy consumption in the set condition
- 7.2.8. Safe operation after vibration test
- 7.2.9. Durability test
- 7.2.10. Tests for external key switch (installed on the outside of the vehicle)
- 7.2.11. Test of systems for the protection of the passenger compartment
- 7.2.12. Electromagnetic compatibility
- 7.2.13. Safety against false alarm in the event of an impact on the vehicle
- 7.2.14. Safety against false alarm in the event of a voltage reduction
- 7.2.15. Test for safety against false alarm of the passenger compartment control
- 8. INSTRUCTIONS
- 9. MODIFICATION OF THE VAS TYPE AND EXTENSION OF APPROVAL
- 10. CONFORMITY OF PRODUCTION
- 11. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 12. PRODUCTION DEFINITELY DISCONTINUED
- 13. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- PART II
- APPROVAL OF A VEHICLE WITH REGARD TO ITS ALARM SYSTEM
- 14. DEFINITIONS
- 15. APPLICATION FOR APPROVAL
- 16. APPROVAL
- 17. GENERAL SPECIFICATIONS
- 18. PARTICULAR SPECIFICATIONS
- 18.1. Protection range
- 18.1.1. Specific requirements
- 18.1.2. Safety against false alarm.
- 18.2. Audible alarm
- 18.2.1. General
- 18.2.2. Duration of the audible signal
- 18.2.3. Specifications concerning the audible signal.
- 18.3. Optical alarm — if fitted
- 18.3.1. General
- 18.4. Radio alarm (pager) — if fitted
- 18.5. Alarm system setting lock
- 18.6. Setting and unsetting of the AS
- 18.6.1. Setting
- 18.6.2 Unsetting
- 18.7 Exit delay
- 18.8. Entry delay
- 18.9. Status display
- 18.10. Power supply
- 18.11. Specifications for optional functions
- 19. TEST CONDITIONS
- 20. INSTRUCTIONS
- 21. MODIFICATION OF THE VEHICLE TYPE AND EXTENSION OF APPROVAL
- 22. CONFORMITY OF PRODUCTION
- 23. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 24. PRODUCTION DEFINITELY DISCONTINUED
- 25. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- PART III
- APPROVAL OF IMMOBILIZERS AND APPROVAL OF A VEHICLE WITH REGARD TO ITS IMMOBILIZER
- 26. DEFINITIONS
- 27. APPLICATION FOR APPROVAL OF AN IMMOBILIZER
- 28. APPLICATION FOR APPROVAL OF A VEHICLE
- 29. APPROVAL OF AN IMMOBILIZER
- 30. APPROVAL OF A VEHICLE
- 31. GENERAL SPECIFICATIONS
- 32. PARTICULAR SPECIFICATIONS
- 32.1.
- Extent of disablement
- 32.2.
- Operating reliability
- 32.3.
- Operating safety
- 32.4.
- Setting of the immobilizer
- 32.5.
- Unsetting
- 32.6.
- Status display
- 33. OPERATION PARAMETERS AND TEST CONDITIONS
- 33.1.
- Operation parameters
- 33.2.
- Test conditions
- 33.3.
- Operation test
- 34. INSTRUCTIONS
- 35. MODIFICATION OF THE IMMOBILIZER TYPE OR VEHICLE TYPE AND EXTENSION OF APPROVAL
- 36. CONFORMITY OF PRODUCTION
- 37. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 38. PRODUCTION DEFINITELY DISCONTINUED
- 39. TRANSITIONAL PROVISIONS
- 39.1. Type approval of an immobilizer
- 39.2. Approval of a vehicle type
- 40. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- ANNEX I
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX II
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX III
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX IV
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX V
- ARRANGEMENTS OF APPROVAL MARKS
- Model A
- Figure 1
- Figure 2
- Figure 3
- Model B
- ANNEX VI
- MODEL OF CERTIFICATE OF CONFORMITY
- ANNEX VII
- MODEL OF INSTALLATION CERTIFICATE
- ANNEX VIII
- PARAGRAPHS 7.2.11 AND 19
- Test of systems for the protection of the passenger compartment
- ANNEX IX
- ELECTROMAGNETIC COMPATIBILITY
- 1. METHOD ISO
- Immunity against disturbances conducted along supply lines
- VAS/AS in unset state
- VAS/AS in set state
- Immunity against disturbance coupled on signal lines
- Immunity against radiated high frequency disturbances
- Electrical disturbance from electrostatic discharges
- Radiated emission
- 2. METHOD IEC
- Electromagnetic field
- Electrical disturbance from electrostatic discharges
- Radiated emissions
- ANNEX X
- SPECIFICATIONS FOR MECHANICAL KEY SWITCHES
Feedback