Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rul... (32024D0368)
INHALT
Commission Implementing Decision (EU) 2024/368 of 23 January 2024 laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption
- COMMISSION IMPLEMENTING DECISION (EU) 2024/368
- of 23 January 2024
- laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption
- (Text with EEA relevance)
- Article 1
- Article 2
- Definitions
- Article 3
- ANNEX I
- FINAL ORGANIC MATERIAL
- 1.
- GENERAL PROCEDURE FOR TESTING AND ACCEPTING FINAL ORGANIC MATERIALS AS USED IN A PRODUCT.
- 2.
- IDENTIFICATION OF RELEVANT SUBSTANCES AND RELEVANT OTHER PARAMETERS
- 2.1.
- Categorisation of products or components into risk groups and corresponding testing requirements.
- 2.2.
- Formulation review
- 2.2.1
- Required information
- 2.2.2
- Relevant substances
- 2.2.3
- Acceptance of starting substances
- 2.2.4
- Material-specific requirements
- 3.
- TESTING REQUIREMENTS
- 3.1.
- Migration testing
- 3.1.1.
- Standards
- 3.1.2
- Test piece
- 3.1.3.
- Temperature of testing
- 3.1.4.
- Type of test water
- 3.1.5.
- Migration periods
- 3.2.
- Analysis of migration waters
- 3.2.1.
- Relevant Substances
- 3.2.2.
- Unexpected Substances
- 3.2.3.
- Relevant other parameters
- 3.3.
- Mathematical modelling
- 3.4.
- Enhancement of Microbial Growth (EMG) testing
- 3.5.
- Testing residual content of substances (QM/QMA)
- 4.
- ACCEPTANCE REQUIREMENTS: PASS/FAIL CRITERIA
- 4.1.
- Formulation
- 4.2.
- Relevant substances, unexpected substances, TOC
- 4.2.1.
- Conversion of test results
- 4.2.2.
- Pass/fail criteria for relevant substances
- 4.2.3.
- Pass/fail criteria for unexpected substances
- 4.2.4.
- Pass/fail criteria for TOC
- 4.3.
- Odour, flavour, colour and turbidity
- 4.3.1.
- Pass/fail criteria for TON, TFN
- 4.3.2.
- Pass/fail criteria for colour
- 4.3.3.
- Pass/fail criteria for turbidity
- 4.4.
- Enhancement of Microbial Growth (EMG)
- 4.5.
- Pass/fail criteria for residual content of substances (QM and QMA)
- 4.6.
- Purity pass/fail criteria for pigments, colorants and fillers
- ANNEX II
- FINAL METALLIC MATERIALS
- 1.
- GENERAL PROCEDURE FOR TESTING AND ACCEPTING FINAL METALLIC MATERIALS AS USED IN A PRODUCT.
- 2.
- IDENTIFICATION OF RELEVANT SUBSTANCES AND RELEVANT OTHER PARAMETERS
- 2.1.
- Composition review
- 2.1.2.
- Accepted compositions
- 2.1.3.
- Relevant substances
- 3.
- TESTING REQUIREMENTS
- 3.1.
- Composition testing
- 3.2.
- Testing of release of relevant substances from plated products
- 4.
- ACCEPTANCE REQUIREMENTS: PASS/FAIL CRITERIA
- 4.1.
- Compliance with the European positive list of metallic compositions
- 4.2.
- Pass/fail criteria for relevant substances
- ANNEX III
- FINAL CEMENTITIOUS MATERIALS
- 1.
- GENERAL PROCEDURE FOR TESTING AND ACCEPTING FINAL CEMENTITIOUS MATERIALS AS USED IN A PRODUCT.
- 2.
- IDENTIFICATION OF RELEVANT SUBSTANCES AND RELEVANT OTHER PARAMETERS
- 2.1.
- Categorisation of products into risk groups and corresponding testing requirements
- 2.2.
- Formulation review
- 2.2.1.
- Required Information
- 2.2.2.
- Relevant substances
- 2.2.3.
- Accepted constituents
- 2.2.4.
- Material-specific requirements
- 3.
- TESTING REQUIREMENTS
- 3.1.
- Migration testing
- 3.1.1.
- Specifications for testing final cementitious materials for migration of organoleptic parameters (odour, flavour, colour and turbidity), TOC, relevant and unexpected substances
- 3.2.
- Analysis of migration waters
- 3.2.1.
- Relevant substances
- 3.2.2.
- Unexpected substances
- 3.2.3.
- Relevant other parameters
- 3.3.
- Mathematical modelling
- 3.4.
- Enhancement of Microbial Growth (EMG) testing
- 4.
- ACCEPTANCE REQUIREMENTS: PASS/FAIL CRITERIA
- 4.1.
- Formulation
- 4.2.
- Relevant substances, unexpected substances
- 4.2.1.
- Conversion of migration test results
- 4.2.2.
- Pass/fail criteria for relevant substances
- 4.2.3.
- Pass/fail criteria for unexpected substances
- 4.2.4.
- Pass/fail criteria for Total Organic Carbon (TOC)
- 4.3.
- Odour, flavour, colour and turbidity
- 4.3.1.
- Pass/fail criteria for TON, TFN
- 4.3.2.
- Pass/fail criteria for colour
- 4.3.3.
- Pass/fail criteria for turbidity
- 4.4.
- Enhancement of Microbial Growth (EMG)
- ANNEX IV
- FINAL ENAMELS, CERAMIC MATERIALS AND OTHER INORGANIC MATERIALS (INCLUDING GLASS)
- 1.
- GENERAL PROCEDURE FOR TESTING AND ACCEPTING
- 2.
- IDENTIFICATION OF RELEVANT SUBSTANCES AND RELEVANT OTHER PARAMETERS
- 2.1.
- Categorisation of products or components into risk groups and corresponding testing requirements.
- 2.2.
- Composition review
- 2.2.1.
- Required information
- 2.2.2.
- Accepted compositions
- 2.2.3.
- Relevant substances
- 3.
- TESTING REQUIREMENTS
- 3.1.
- Testing of the composition
- 3.2.
- Migration testing
- 3.2.1.
- Standards
- 3.2.2.
- Test piece
- 3.2.3.
- Temperature of testing
- 3.2.4.
- Type of test water
- 3.2.5.
- Migration periods
- 3.3.
- Analysis of migration waters
- 3.3.1.
- Relevant Substances
- 4.
- ACCEPTANCE REQUIREMENTS: PASS/FAIL CRITERIA
- 4.1.
- Composition
- 4.2.
- Relevant substances
- 4.2.1.
- Conversion of test results
- 4.2.2.
- Pass/fail criteria for relevant substances
Feedback