Commission Implementing Decision (EU) 2022/2110 of 11 October 2022 establishing t... (32022D2110)
Commission Implementing Decision (EU) 2022/2110 of 11 October 2022 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for the ferrous metals processing industry (notified under document C(2022) 7054) (Text with EEA relevance)
- COMMISSION IMPLEMENTING DECISION (EU) 2022/2110
- of 11 October 2022
- establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for the ferrous metals processing industry
- (notified under document C(2022) 7054)
- (Text with EEA relevance)
- Article 1
- Article 2
- ANNEX
- 1.
- BEST AVAILABLE TECHNIQUES (BAT) CONCLUSIONS FOR THE FERROUS METALS PROCESSING INDUSTRY
- SCOPE
- DEFINITIONS
- ACRONYMS
- GENERAL CONSIDERATIONS
- Best Available Techniques
- BAT-AELs and indicative emission levels for emissions to air
- BAT-AELs for emissions to water
- Other environmental performance levels associated with the best available techniques (BAT-AEPLs)
- BAT-AEPLs for specific energy consumption (energy efficiency)
- BAT-AEPLs for specific water consumption
- BAT-AEPLs for specific material consumption
- 1.1.
- General BAT conclusions for the ferrous metals processing industry
- 1.1.1.
- General environmental performance
- Applicability
- Applicability
- Applicability
- 1.1.2.
- Monitoring
- Description
- 1.1.3.
- Hazardous substances
- Applicability
- 1.1.4.
- Energy efficiency
- 1.1.5.
- Material efficiency
- Description
- Applicability
- 1.1.6.
- Water use and waste water generation
- 1.1.7.
- Emissions to air
- 1.1.7.1.
- Emissions to air from heating
- Description
- 1.1.7.2.
- emissions to air from degreasing
- 1.1.7.3.
- Emissions to air from pickling
- 1.1.7.4.
- Emissions to air from hot dipping
- 1.1.7.4.1.
- Emissions to air from oiling
- 1.1.7.5.
- Emissions to air from post-treatment
- 1.1.7.6.
- Emissions to air from acid recovery
- 1.1.8.
- Emissions to water
- Description
- 1.1.9.
- Noise and vibrations
- Applicability
- 1.1.10.
- Residues
- 1.2.
- BAT conclusions for hot rolling
- 1.2.1.
- Energy efficiency
- 1.2.2.
- Material efficiency
- 1.2.3.
- Emissions to air
- Description
- 1.3.
- BAT conclusions for cold rolling
- 1.3.1.
- Energy efficiency
- 1.3.2.
- Material efficiency
- 1.3.3.
- Emissions to air
- 1.4.
- BAT conclusions for wire drawing
- 1.4.1.
- Energy efficiency
- Description
- 1.4.2.
- Material efficiency
- Description
- 1.4.3.
- Emissions to air
- 1.4.4.
- Residues
- 1.5.
- BAT conclusions for hot dip coating of sheets and wires
- 1.5.1.
- Material efficiency
- 1.6.
- BAT conclusions for batch galvanising
- 1.6.1.
- Residues
- Description
- Applicability
- Description
- 1.6.2.
- Material efficiency
- 1.6.3.
- Emissions to air
- 1.6.4.
- Waste water discharge
- Description
- 1.7.
- Descriptions of techniques
- 1.7.1.
- Techniques to increase energy efficiency
- 1.7.2.
- Techniques to reduce emissions to air
- 1.7.3.
- Techniques to reduce emissions to water
Feedback