Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Re... (32015R0504)
INHALT
Commission Implementing Regulation (EU) 2015/504 of 11 March 2015 implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles Text with EEA relevance
- COMMISSION IMPLEMENTING REGULATION (EU) 2015/504
- of 11 March 2015
- implementing Regulation (EU) No 167/2013 of the European Parliament and of the Council with regard to the administrative requirements for the approval and market surveillance of agricultural and forestry vehicles
- (Text with EEA relevance)
- Article 1
- Subject matter
- Article 2
- Template for the information document and for the information folder
- Article 3
- Template for the manufacturer's certificate on access to vehicle on-board diagnostics (OBD) and to vehicle repair and maintenance information
- Article 4
- Templates for the certificate of conformity
- Article 5
- Models for the statutory plate and EU type-approval mark
- Article 6
- Templates for the EU type-approval certificate
- Article 7
- Numbering system of EU type-approval certificates
- Article 8
- Template for the test results sheet
- Article 9
- Format of test reports
- Article 10
- List of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- Article 11
- Template for the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- Article 12
- Numbering system of certificates for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- Article 13
- Entry into force and application
- LIST OF ANNEXES
- ANNEX I
- Template for the information document and for the information folder
- PART A
- INFORMATION FOLDER
- 1.
- General requirements
- 2.
- Template of the information folder sheet.
- Information
- on the type-approval procedure chosen in accordance with Article 20(1) of Regulation (EU) No 167/2013 of the European Parliament and of the Council
- Information folder sheet
- 2.8. Virtual and/or self-testing (
- 1
- )
- PART B
- INFORMATION DOCUMENT
- 1. GENERAL REQUIREMENTS
- 2. TYPE-APPROVAL OF VEHICLES
- 2.3 Type-, variant- and version designations
- 2.3.6. Number of characters for the TVV
- 3. TYPE-APPROVAL OF SYSTEMS, COMPONENTS AND SEPARATE TECHNICAL UNITS
- 4. TYPE-APPROVAL NUMBERS OR TEST REPORTS NUMBERS OF THE APPLICABLE SUBJECTS
- 5. INFORMATION DOCUMENT DATA ENTRIES
- A.
- GENERAL INFORMATION
- 1. GENERAL INFORMATION CONCERNING VEHICLES
- 1.5.
- Manufacturer's statutory plate(s)
- 1.6.
- Vehicle identification number
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 2.5.
- Additional general information for engines
- 2.5.4.
- Additional marks for engines
- 3. GENERAL CONSTRUCTION CHARACTERISTICS
- 3.4.
- For C-category vehicles
- 3.4.4.
- Steering for C-category vehicles
- 3.5.
- Chassis
- 4. MASSES AND DIMENSIONS
- 4.1
- Range of vehicle mass (overall)
- 4.1.1.
- Unladen mass
- 4.1.2.
- Maximum mass(es), as declared by the manufacturer
- 4.1.2.2. Mass(es) and tyre(s)
- 4.1.2.3. Mass(es) and crawler undercarriage
- 4.2.
- Range of vehicle dimensions (overall)
- 4.2.1.
- For incomplete vehicles
- 4.2.1.1. Length (
- 31
- )
- 4.2.1.2. Width (
- 32
- )
- 4.2.2.
- For complete/completed
- (
- 4
- )
- vehicles
- 4.2.2.1.1. Length for on-road use (
- 31
- )
- 4.2.2.1.2. Width for on-road use (
- 32
- )
- 4.2.2.1.3. Height for on-road use (
- 33
- ) (
- 47
- )
- 4.2.2.2. Forward overhang (
- 34
- ) (
- 48
- )
- 4.2.2.3. Rear overhang (
- 35
- )
- 4.2.2.4. Ground clearance (
- 36
- )
- 5. GENERAL POWERTRAIN CHARACTERISTICS
- 5.1.
- Maximum vehicle speed
- 5.1.1.
- Forward maximum vehicle speed
- 5.1.2.
- Rearward maximum vehicle speed
- (
- 54
- )
- B.
- INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE
- 6. ESSENTIAL CHARACTERISTICS OF THE PARENT ENGINE/ENGINE (
- 4
- )
- 6.12.
- Cooling system
- 6.12.1.
- Liquid
- 6.12.2.
- Air
- 6.13.
- Temperature permitted by the manufacturer
- 6.14.
- Pressure charger
- 6.17.
- Measures taken against air pollution
- 6.18.
- Fuel feed for diesel engines
- 6.18.1.
- Feed pump
- 6.18.2.
- Injection system
- 6.18.2.1. Pump
- 6.18.2.4. Injector(s)
- 6.18.2.4. Governor
- 6.18.2.5. Cold-start system
- 6.19.
- Fuel for petrol engines
- 6.19.2. Port fuel injection: single-point/multi-point (
- 4
- )
- 6.20.
- Valve timing
- 6.20.3.
- Variable valve timing system (if applicable and where intake and/or exhaust)
- 6.21.
- Porting configuration
- 6.22.
- Ignition system
- 6.22.1.
- Ignition coil
- 7. ESSENTIAL CHARACTERISTICS OF THE ENGINE FAMILY
- 7.1.
- Common parameters
- (
- 56
- )
- 7.1.7
- Engine management systems (proof of identity pursuant to drawing number(s))
- 7.2.
- Engine family listing
- 8. ESSENTIAL CHARACTERISTICS OF THE ENGINE TYPE WITHIN THE FAMILY
- 8.12.
- Cooling system
- 8.12.1.
- Liquid
- 8.12.2.
- Air
- 8.13.
- Temperature permitted by the manufacturer
- 8.14.
- Pressure charger
- 8.17.
- Measures taken against air pollution
- 8.18.
- Fuel feed for diesel engines
- 8.18.1.
- Feed pump
- 8.18.2.
- Injection system
- 8.18.2.1. Pump
- 8.18.2.4. Injector(s)
- 8.18.2.4. Governor
- 8.18.2.5. Cold-start system
- 8.19.
- Fuel for petrol engines
- 8.19.2. Port fuel injection: single-point/multi-point (
- 4
- )
- 8.20.
- Valve timing
- 8.20.3.
- Variable valve timing system (if applicable and where intake and/or exhaust)
- 8.21.
- Porting configuration
- 8.22.
- Ignition system
- 8.22.1.
- Ignition coil
- 9. ENERGY STORAGE DEVICE(S)
- 9.4. Energy stored
- 10. EXTERNAL SOUND LEVEL
- 10.1.
- External sound level declared by the manufacturer
- 10.3.
- Air-intake system
- 10.3.2.
- Air filter
- 10.3.3.
- Intake silencer
- 10.4.
- Exhaust system
- 11. DRIVE-TRAIN AND CONTROL (
- 13
- )
- 11.2.
- Transmission
- 11.3.
- Clutch (if any)
- 11.4.
- Gearbox (if any)
- 11.5.
- Gear ratios
- 11.6.
- Differential lock
- C.
- INFORMATION ON FUNCTIONAL SAFETY
- 12. PROPULSION AND/OR DRIVE-TRAIN OUTPUT GOVERNORS
- 13. STEERING
- 13.3.
- Transmission and control of steering
- 13.4.
- Maximum turning angle of the wheels (if fitted)
- 13.5.
- Minimum turning circle (without braking)
- (
- 42
- )
- 13.6.
- Steering for fast (‘b’ speed index) T-category vehicles
- 13.7.
- Complex electronic control systems that affect the steering function
- 14. SPEEDOMETER, ODOMETER, TACHOMETER AND HOUR METER
- 14.1.
- Speedometer
- 14.2.
- Odometer
- 14.3.
- Tachometer
- 14.4.
- Hour meter
- 15. FIELD OF VISION
- 16. WINDSCREEN WIPERS AND WASHERS AND DEFROSTING AND DEMISTING
- 16.1.
- Windscreen wipers
- 16.2.
- Windscreen washer
- 16.3.
- Defrosting and demisting
- 17. GLAZING
- 17.2.3.
- Windscreen(s)
- 17.2.4.
- Window(s)
- 17.2.5.
- Opening roof glazing
- 17.2.6.
- Other glass panes
- 18. REAR-VIEW MIRRORS
- 18.9.
- Field of vision for rear view mirror(s) of class II
- 19. DEVICES FOR INDIRECT VISION OTHER THAN MIRRORS (OPTIONAL)
- 20. DRIVER INFORMATION SYSTEMS
- 21. INSTALLATION OF LIGHTING, LIGHT-SIGNALLING DEVICES, INCLUDING AUTOMATIC SWITCHING OF LIGHTING
- 22. VEHICLE OCCUPANT PROTECTION, INCLUDING INTERIOR FITTINGS AND OTHER WEATHER PROTECTION ARRANGEMENTS
- 22.1.
- Bodywork
- 22.2.
- Burning rate of cab material
- 22.3.
- Interior protection for occupants
- 22.4.
- Head restraint(s)
- 22.5.
- Foot rests
- 22.6.
- Other weather protection arrangements
- 23. VEHICLE EXTERIOR AND ACCESSORIES
- 24. ELECTRO-MAGNETIC COMPATIBILITY (EMC)
- 25. AUDIBLE WARNING DEVICE(S)
- 26. HEATING SYSTEM AND AIR-CONDITIONING
- 26.4.
- Heating system
- 26.5.
- Air-conditioning
- 27. DEVICES TO PREVENT UNAUTHORISED USE
- 27.1.
- For T- and C-category vehicles
- 27.2.
- For R- and S-category vehicles
- 28. REGISTRATION PLATE(S) SPACE
- 29. BALLAST MASSES
- 30. SAFETY OF ELECTRICAL SYSTEMS
- 30.7.
- Generator
- 30.8.
- All-electric vehicles
- 30.9.
- Battery isolator
- 31. FUEL TANK(S)
- 31.4.
- Main fuel tank(s)
- 31.5.
- Reserve fuel tank(s)
- 32. LATERAL AND REAR PROTECTION
- 32.1.
- Lateral protection
- 32.2.
- Rear protective structure
- 33. LOAD PLATFORM(S)
- 33.1.
- Load platform(s) dimensions
- 33.4.
- Stability of the load platform
- 34. FRONT TOWING DEVICE (T-AND C-CATEGORY VEHICLES)
- 35. TYRES
- 36. SPRAY-SUPPRESSION SYSTEM
- 36.1.
- Wheel guards
- 36.2.
- Other spray-suppression devices
- 37. CRAWLER UNDERCARRIAGE
- 37.3.
- Metallic tracks
- 37.4.
- Rubber tracks
- 38. MECHANICAL COUPLING
- 38.2.
- Short technical description of the mechanical coupling specifying the type of construction and the material used
- 38.3. Rear mechanical coupling
- 39. THREE-POINT LIFTING MECHANISM
- 40. ADDITIONAL COUPLING POINTS
- D.
- INFORMATION ON BRAKING PERFORMANCE
- 41. SUSPENSION
- 42. AXLE(S) AND TYRES
- 43. BRAKING
- 43.4.
- Braking system(s)
- 43.5.
- Braking transmission
- 43.6.
- Towed vehicle braking devices
- E.
- INFORMATION ON VEHICLE CONSTRUCTION
- 44. CONFORMITY OF PRODUCTION
- 45. ACCESS TO VEHICLE ON BOARD DIAGNOSTIC (OBD) AND VEHICLE REPAIR AND MAINTENANCE INFORMATION (
- 45
- )
- 45.6.
- Reprogramming of control units in accordance with point 2.5 of Appendix 1 to Annex V to Commission Delegated Regulation (EU) No 1322/2014
- 45.7.
- Information required for the manufacture of diagnostic tools
- 45.8.
- Repair and maintenance information of vehicle combinations
- 46. ROLL-OVER PROTECTIVE STRUCTURE (ROPS)
- 46.2. ROPS by cab/by frame/by roll bar(s) mounted at front/rear (
- 4
- )
- 46.5.
- Dimensions
- (
- 52
- )
- 46.6.
- Details of materials used in the construction of the protective structure and specifications of steels used
- (
- 53
- )
- 47. FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)
- 47.1.
- T- and C-category vehicles equipped for forestry applications
- 47.2.
- All other T- and C-category vehicles fitted with FOPS
- 47.2.3.
- Dimensions
- (
- 52
- )
- 47.2.4.
- Details of materials used in the construction of the protective structure and specifications of steels used
- (
- 53
- )
- 48. DRIVER'S EXPOSURE TO NOISE LEVEL
- 49. SEATING POSITIONS (SADDLES AND SEATS)
- 49.4.
- Driver's seat
- 49.5.
- Passenger seat(s)
- 50. OPERATING SPACE AND ACCESS TO AND EXIT OF THE VEHICLE INCLUDING DOORS AND WINDOWS
- 50.1.
- Operating space
- 50.4.
- Occupant doors, latches and hinges
- 50.5.
- Windows and emergency exit(s)
- 51. POWER TAKE-OFF(S)
- 51.2.
- Main power take-off
- 51.3.
- Secondary power take-off (if any)
- 51.4.
- Rear power take-off
- 51.5.
- Front power take-off
- 52. PROTECTION OF DRIVE COMPONENTS, EXHAUST SYSTEM, GUARDS AND PROTECTIVE DEVICES
- 53. SEAT-BELT ANCHORAGES
- 53.4.
- Designation of the types of belts
- (
- 14
- )
- authorised for attachment to the anchorages on the vehicles
- 53.7.
- Alternative to entries 53.2 to 53.6.
- 54. SAFETY BELTS
- 55. PROTECTION AGAINST PENETRATING OBJECTS (OPS)
- 55.1.
- T- and C-category vehicles equipped for forestry applications
- 55.2.
- All other T- and C-category vehicles fitted with OPS
- 56. OPERATOR'S MANUAL, INFORMATION WARNINGS AND MARKINGS
- 56.1.
- Operator's manual
- 56.2.
- Information, warnings and markings
- 57. DRIVER-OPERATED CONTROL DEVICES INCLUDING IDENTIFICATION OF CONTROL DEVICES, TELL-TALES AND INDICATORS
- 57.2.
- Controls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose
- 57.3.
- Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified
- 58. PROTECTION AGAINST HAZARDOUS SUBSTANCES
- 59. FOR T- AND C-CATEGORY VEHICLES, MACHINERY (
- 63
- ) MOUNTED ON THE VEHICLE
- Appendix 1
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of an engine/engine family system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 2.5.
- Additional general information for engines
- 2.5.4.
- Additional marks for engines
- 5. GENERAL POWERTRAIN CHARACTERISTICS
- 5.1. Maximum vehicle speed
- 5.1.1. Forward maximum vehicle speed
- 5.1.2. Rearward maximum vehicle speed (
- 54
- )
- B.
- INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE
- 6. ESSENTIAL CHARACTERISTICS OF THE PARENT ENGINE/ENGINE (
- 4
- )
- 6.12. Cooling system
- 6.12.1. Liquid
- 6.12.2. Air
- 6.13. Temperature permitted by the manufacturer
- 6.14. Pressure charger
- 6.17. Measures taken against air pollution
- 6.18. Fuel feed for diesel engines
- 6.18.1. Feed pump
- 6.18.2. Injection system
- 6.18.2.1. Pump
- 6.18.2.4. Injector(s)
- 6.18.2.4. Governor
- 6.18.2.5. Cold-start system
- 6.19. Fuel for petrol engines
- 6.20. Valve timing
- 6.21. Porting configuration
- 6.22. Ignition system
- 6.22.1. Ignition coil
- 7. ESSENTIAL CHARACTERISTICS OF THE ENGINE FAMILY
- 7.1. Common parameters (
- 56
- )
- 7.1.7 Engine management systems (proof of identity pursuant to drawing number(s))
- 7.2. Engine family listing
- 8. ESSENTIAL CHARACTERISTICS OF THE ENGINE TYPE WITHIN THE FAMILY
- 8.12. Cooling system
- 8.12.1. Liquid
- 8.12.2. Air
- 8.13. Temperature permitted by the manufacturer
- 8.14. Pressure charger
- 8.17. Measures taken against air pollution
- 8.18. Fuel feed for diesel engines
- 8.18.1. Feed pump
- 8.18.2. Injection system
- 8.18.2.1. Pump
- 8.18.2.4. Injector(s)
- 8.18.2.4. Governor
- 8.18.2.5. Cold-start system
- 8.19. Fuel for petrol engines
- 8.20. Valve timing
- 8.21. Porting configuration
- 8.22. Ignition system
- 8.22.1. Ignition coil
- Appendix 2
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an external sound level system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 2.5.
- Additional general information for engines
- 2.5.4.
- Additional marks for engines
- 5. GENERAL POWERTRAIN CHARACTERISTICS
- 5.1.
- Maximum vehicle speed
- 5.1.1.
- Forward maximum vehicle speed
- 5.1.2.
- Rearward maximum vehicle speed
- (
- 54
- )
- 10. EXTERNAL SOUND LEVEL
- 10.1. External sound level declared by the manufacturer
- 10.3. Air-intake system
- 10.3.2. Air filter
- 10.3.3. Intake silencer
- 10.4. Exhaust system
- Appendix 3
- Model information document relating to EU type-approval of an engine/engine family as a component/STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 2.5.
- Additional general information for engines
- 2.5.4.
- Additional marks for engines
- 5. GENERAL POWERTRAIN CHARACTERISTICS
- B.
- INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE
- 6. ESSENTIAL CHARACTERISTICS OF THE PARENT ENGINE/ENGINE (
- 4
- )
- 6.12.
- Cooling system
- 6.12.1.
- Liquid
- 6.12.2.
- Air
- 6.13.
- Temperature permitted by the manufacturer
- 6.14.
- Pressure charger
- 6.17.
- Measures taken against air pollution
- 6.18.
- Fuel feed for diesel engines
- 6.18.1.
- Feed pump
- 6.18.2.
- Injection system
- 6.18.2.1. Pump
- 6.18.2.4. Injector(s)
- 6.18.2.4. Governor
- 6.18.2.5. Cold-start system
- 6.19.
- Fuel for petrol engines
- 6.19.2. Port fuel injection: single-point/multi-point (
- 4
- )
- 6.20.
- Valve timing
- 6.20.3.
- Variable valve timing system (if applicable and where intake and/or exhaust)
- 6.21.
- Porting configuration
- 6.22.
- Ignition system
- 6.22.1.
- Ignition coil
- 7. ESSENTIAL CHARACTERISTICS OF THE ENGINE FAMILY
- 7.1.
- Common parameters
- (
- 56
- )
- 7.1.7
- Engine management systems (proof of identity pursuant to drawing number(s))
- 7.2.
- Engine family listing
- 8. ESSENTIAL CHARACTERISTICS OF THE ENGINE TYPE WITHIN THE FAMILY
- 8.12.
- Cooling system
- 8.12.1.
- Liquid
- 8.12.2.
- Air
- 8.13.
- Temperature permitted by the manufacturer
- 8.14.
- Pressure charger
- 8.17.
- Measures taken against air pollution
- 8.18.
- Fuel feed for diesel engines
- 8.18.1.
- Feed pump
- 8.18.2.
- Injection system
- 8.18.2.1. Pump
- 8.18.2.4. Injector(s)
- 8.18.2.4. Governor
- 8.18.2.5. Cold-start system
- 8.19.
- Fuel for petrol engines
- 8.19.2. Port fuel injection: single-point/multi-point (
- 4
- )
- 8.20.
- Valve timing
- 8.20.3.
- Variable valve timing system (if applicable and where intake and/or exhaust)
- 8.21.
- Porting configuration
- 8.22.
- Ignition system
- 8.22.1.
- Ignition coil
- Appendix 4
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a driver information system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 20. DRIVER INFORMATION SYSTEMS
- Appendix 5
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of lighting and light-signalling devices system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 3. GENERAL CONSTRUCTION CHARACTERISTICS
- 21. INSTALLATION OF LIGHTING, LIGHT-SIGNALLING DEVICES, INCLUDING AUTOMATIC SWITCHING OF LIGHTING
- Appendix 6
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an electro-magnetic compatibility system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 24. ELECTRO-MAGNETIC COMPATIBILITY (EMC)
- Appendix 7
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of audible warning device(s) system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 25. AUDIBLE WARNING DEVICE(S)
- Appendix 8
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of rear-view mirror as a system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 18. REAR-VIEW MIRRORS
- 18.9.
- Field of vision for rear view mirror(s) of class II
- 19. DEVICES FOR INDIRECT VISION OTHER THAN MIRRORS (OPTIONAL)
- Appendix 9
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) an installation of a crawler undercarriage system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 3. GENERAL CONSTRUCTION CHARACTERISTICS
- 3.4.
- For C-category vehicles
- 3.4.4.
- Steering for C-category vehicles
- 3.5.
- Chassis
- 4. MASSES AND DIMENSIONS
- 4.1
- Range of vehicle mass (overall)
- 4.1.1.
- Unladen mass
- 4.1.2.
- Maximum mass(es), as declared by the manufacturer
- 4.1.2.2. Mass(es) and tyre(s)
- 4.1.2.3. Mass(es) and crawler undercarriage
- 37. CRAWLER UNDERCARRIAGE
- 37.3.
- Metallic tracks
- 37.4.
- Rubber tracks
- Appendix 10
- Model information document relating to EU type-approval of electro-magnetic compatibility of electrical/electronic sub-assemblies as a STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 24. ELECTRO-MAGNETIC COMPATIBILITY (EMC)
- Appendix 11
- Model information document relating to EU type-approval of ballast masses as a component/STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 29. BALLAST MASSES
- Appendix 12
- Model information document relating to EU type-approval of a lateral and/or rear protective structure as a component/STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 32. LATERAL AND REAR PROTECTION
- 32.1.
- Lateral protection
- 32.2.
- Rear protective structure
- Appendix 13
- Model information document relating to EU type-approval of a tyre as a component
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 35. TYRES
- 35.12.
- Load capacity index and speed category symbol
- …
- Appendix 14
- Model information document relating to EU type-approval of a mechanical coupling as a component/STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 38. MECHANICAL COUPLINGS
- 38.2.
- Short technical description of the mechanical coupling specifying the type of construction and the material used
- Appendix 15
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a braking system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 3. GENERAL CONSTRUCTION CHARACTERISTICS
- 3.4.
- For C-category vehicles
- 3.4.4.
- Steering for C-category vehicles
- 3.5.
- Chassis
- 4. MASSES AND DIMENSIONS
- 4.1
- Range of vehicle mass (overall)
- 4.1.1.
- Unladen mass
- 4.1.2.
- Maximum mass(es), as declared by the manufacturer
- 4.2.
- Range of vehicle dimensions (overall)
- 5. GENERAL POWERTRAIN CHARACTERISTICS
- 5.1.
- Maximum vehicle speed
- 5.1.1.
- Forward maximum vehicle speed
- 5.1.2.
- Rearward maximum vehicle speed
- (
- 54
- )
- B.
- INFORMATION ON ENVIRONMENTAL AND PROPULSION PERFORMANCE
- 6. ESSENTIAL CHARACTERISTICS OF THE PARENT ENGINE/ENGINE (
- 4
- )
- 9. ENERGY STORAGE DEVICE(S)
- 11. DRIVE-TRAIN AND CONTROL (
- 13
- )
- 11.2.
- Transmission
- 11.3.
- Clutch (if any)
- 11.4.
- Gearbox (if any)
- 11.5.
- Gear ratios
- 11.6.
- Differential lock
- 41. SUSPENSION
- 42. AXLE(S) AND TYRES
- 43. BRAKING
- 43.4.
- Braking system(s)
- 43.5.
- Braking transmission
- 43.6.
- Towed vehicle braking devices
- Appendix 16
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a driver's exposure to noise level system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 48. DRIVER'S EXPOSURE TO NOISE LEVEL
- Appendix 17
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a seat belt anchorages system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 46. ROLL-OVER PROTECTIVE STRUCTURE (ROPS)
- 49. SEATING POSITIONS (SADDLES AND SEATS)
- 53. SEAT-BELT ANCHORAGES
- 53.4.
- Designation of the types of belts
- (
- 14
- )
- authorised for attachment to the anchorages on the vehicle
- 53.7.
- Alternative to entries 53.2 to 53.6.
- Appendix 18
- Model information document relating to EU type-approval of a type of (or a type of a vehicle with regard to) a protection against hazardous substances system
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 3. GENERAL CONSTRUCTION CHARACTERISTICS
- 58. PROTECTION AGAINST HAZARDOUS SUBSTANCES
- Appendix 19
- Model information document relating to EU type-approval of a roll-over protective structure (ROPS) as a STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 46. ROLL-OVER PROTECTIVE STRUCTURE (ROPS)
- 46.5.
- Dimensions
- (
- 52
- )
- 46.6.
- Details of materials used in the construction of the protective structure and specifications of steels used
- (
- 53
- )
- Appendix 20
- Model information document relating to EU type-approval of a falling objects protective structure (FOPS) as a STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 47. FALLING OBJECT PROTECTIVE STRUCTURES (FOPS)
- 47.1.
- Vehicles of categories T and C equipped for forestry applications
- 47.2.
- All other vehicles of categories T and C fitted with FOPS
- 47.2.3.
- Dimensions
- (
- 52
- )
- 47.2.4.
- Details of materials used in the construction of the protective structure and specifications of steels used
- (
- 53
- )
- Appendix 21
- Model information document relating to EU type-approval of a driver's seat as a component/STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 49. SEATING POSITIONS (SADDLES AND SEATS)
- 49.4.
- Driver's seat
- Appendix 22
- Model information document relating to EU type-approval of a safety belt as a component/STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 54. SAFETY BELTS
- Appendix 23
- Model information document relating to EU type-approval of a protection against penetrating objects (OPS) as a STU
- A.
- GENERAL INFORMATION
- 2. GENERAL INFORMATION CONCERNING SYSTEMS, COMPONENTS OR SEPARATE TECHNICAL UNITS
- 55. PROTECTION AGAINST PENETRATING OBJECTS (OPS)
- 55.1.
- Vehicles of categories T and C equipped for forestry applications
- 55.2.
- All other T- and C-category vehicles fitted with OPS
- Appendix 24
- Manufacturer's declaration on anti-tampering of powertrain and speed-limitation device
- Manufacturer's declaration on anti-tampering of powertrain and speed-limitation device
- Will not market interchangeable components which could involve an increase in the propulsion performance of the vehicle variant
- Explanatory notes relating to Appendix 24
- (Footnote markers, footnotes and explanatory notes not to be stated on the Manufacturer's declaration):
- ANNEX II
- Template for the manufacturer's certificate on access to vehicle on-board diagnostics (OBD) and to vehicle repair and maintenance information
- Manufacturer's certificate on access to vehicle OBD and vehicle repair and maintenance information
- Addendum 1
- to
- Manufacturer's certificate with reference number … on access to vehicle OBD and vehicle repair and maintenance information
- Addendum 2
- to
- Manufacturer's certificate with reference number … on access to vehicle OBD and vehicle repair and maintenance information
- Addendum 3
- to
- Manufacturer's certificate with reference number … on access to vehicle OBD and vehicle repair and maintenance information
- ANNEX III
- Templates for the certificate of conformity
- 1.
- Objectives
- 2.
- General requirements
- 3.
- Models of section 1 of the certificate of conformity
- 4.
- Models of section 2 of the certificate of conformity
- 5.
- Paper and features to prevent forgery
- 6.
- Special provisions
- Appendix 1
- Models for the certificate of conformity
- ANNEX IV
- Models for the statutory plate and EU type-approval mark
- 1.
- General requirements for vehicle marking
- 1.2. Characters
- 1.3. Minimum height of letters and figures.
- 2.
- Statutory plate
- 3.
- Requirements for the VIN
- 4.
- Marking requirements for a multi-stage approval
- 4.1. Base vehicle identification number
- 4.2. Additional statutory plate.
- 5.
- Marking requirements for components or separate technical units
- Appendix 1
- Examples of the manufacturer's statutory plate
- 1. MODEL A for a T1b-category vehicle
- SOFIA TRAKTOR WERKE.
- T1b
- e6*167/2013*01223
- 5DRH123UPAX000001
- 5 590 kg
- A-1: 2 390 kg
- A-2: 3 200 kg
- 2. MODEL B for stage 1 of a C2a-category vehicle
- JEAN NICOLE TRACTORS Ltd.
- C2a STAGE 1
- e3*167/2013*14863
- ZFS159000AZ000055
- 820 kg
- A-1: 366 kg
- S-2: 454 kg P: 255 kPa
- 3. MODEL C for a rigid drawbar R2a-category vehicle
- REMORQUES HENSCHLER SA.
- R2a
- e12*167/2013*00053
- YA9EBS37009000005
- 2 250 kg
- A-0: 1 100 kg
- A-1: 850 kg
- A-2: 1 200 kg
- Appendix 2
- Examples of an EU type-approval mark for a separate technical unit or component
- Figure 1
- Example of EU type-approval mark of a roll-over protective structure (ROPS) (dynamic testing)
- ANNEX V
- Templates for the EU type-approval certificate
- 1.
- General requirements
- Appendix 1
- Model of the EU whole-vehicle type-approval certificate for a complete vehicle type
- EU TYPE-APPROVAL CERTIFICATE
- MODEL A
- (to be used for type-approval of a complete vehicle)
- EU WHOLE-VEHICLE TYPE-APPROVAL CERTIFICATE
- SECTION I
- SECTION II
- SECTION III
- Appendix 2
- Model of the EU whole-vehicle type-approval certificate for an incomplete type, a vehicle type with complete and incomplete variants, a vehicle type with completed and incomplete variants or a completed vehicle type
- EU TYPE-APPROVAL CERTIFICATE
- MODEL B
- (to be used for type-approval of a completed or incomplete vehicle or a vehicle type with complete and incomplete variants or with completed and incomplete variants)
- EU WHOLE-VEHICLE TYPE-APPROVAL CERTIFICATE
- SECTION I
- SECTION II
- SECTION III
- 1. For complete variants
- 2. For completed vehicles/variants
- 3. For incomplete vehicles/variants
- 4. The approval is granted/extended/refused/withdrawn (
- 1
- )
- EU WHOLE-VEHICLE TYPE-APPROVAL CERTIFICATE
- Section 2
- Appendix 3
- Model of the addendum to the EU type-approval certificate
- Addendum to the EU type-approval certificate
- List of regulatory acts with which the type of vehicle complies
- To be filled in only in the case of type-approval in accordance with Article 25(6) of Regulation (EU) No 167/2013
- Appendix 4
- Model of the EU type-approval certificate for a vehicle system
- EU TYPE-APPROVAL CERTIFICATE
- MODEL C
- (to be used for type-approval of a vehicle system)
- EU TYPE-APPROVAL CERTIFICATE
- SECTION I
- SECTION II
- SECTION III
- 2. The approval is granted/extended/refused/withdrawn (
- 1
- )
- EU TYPE-APPROVAL CERTIFICATE
- Section 2
- Appendix 5
- Model of the EU type-approval certificate for a separate technical unit or component
- EU TYPE-APPROVAL CERTIFICATE
- MODEL D
- (to be used for component/separate technical unit type-approval)
- EU TYPE-APPROVAL CERTIFICATE
- SECTION I
- SECTION II
- SECTION III
- 2. The approval is granted/extended/refused/withdrawn (
- 1
- )
- Appendix 6
- Model of the addendum to the EU type-approval certificate for a separate technical unit or component
- Addendum to the EU type-approval certificate
- ADDENDUM TO THE EU TYPE-APPROVAL CERTIFICATE WITH TYPE-APPROVAL NUMBER …
- Explanatory notes relating to Appendix 6
- (Footnote markers, footnotes and explanatory notes not to be stated on the addendum to the EU type-approval certificate):
- ANNEX VI
- Numbering system of EU type-approval certificates
- 4. Lay-out of the type-approval numbers (with fictive sequential numbers and fictive amending Commission Delegated Regulation number (‘RRR/2016’) for explanation purposes)
- Table 6-1
- Codification for the numbering system of EU type-approval certificates of systems, components and separate technical units
- ANNEX VII
- Template for the test results sheet
- 1.
- General requirements
- Appendix 1
- Model of the test results sheet
- EU TEST RESULTS SHEET
- MODEL
- Format: A4 (210 × 297 mm)
- TEST RESULTS
- (to be completed by the EU type-approval authority and attached to the EU type-approval certificate)
- 1.
- Results of the sound level test (external):
- 2.
- Results of the exhaust emission tests
- 2.1.
- NRSC/ESC/WHSC
- (
- 1
- )
- final test results (inclusive of Deterioration Factor):
- 2.2.
- NRTC/ETC/WHTC
- (
- 1
- )
- final test results (inclusive of Deterioration Factor and weighted average of hot start and cold start transient cycles)
- (
- 2
- )
- :
- 3.
- Driver-perceived sound level
- 4.
- Braking performance
- ANNEX VIII
- Format of test reports
- 1.
- General requirements for the format of the test reports
- 2.
- Requirements for the content of the test reports
- 3.
- Special provisions
- ANNEX IX
- List of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- ANNEX X
- Template for the certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- 1.
- General requirements
- Appendix 1
- Model of the EU type-approval authorisation certificate for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- EU AUTHORISATION CERTIFICATE
- MODEL
- Format: A4 (210 × 297 mm)
- EU AUTHORISATION CERTIFICATE
- SECTION I
- SECTION II
- SECTION III
- SECTION IV
- SECTION V — TECHNICAL SERVICE
- SECTION VI
- ANNEX XI
- Numbering system of certificates for the placing on the market and entry into service of parts or equipment which may pose a serious risk to the correct functioning of essential systems
- 1.
- Numbering system
Feedback