Regulation No 58 of the Economic Commission for Europe of the United Nations ... (42008X0830(01))
INHALT
Regulation No 58 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of: I. Rear Underrun Protection Devices (RUPDs), II. Vehicles with regard to the Installation of an RUPD of an approved type, III. Vehicles with regard to their Rear Underrun Protection (RUP)
- Regulation No 58 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of:
- Revision 2
- 1. SCOPE
- 2. PURPOSE
- 3. DEFINITIONS COMMON TO PARTS I, II AND III
- PART I: APPROVAL OF RUPDs
- 4. DEFINITIONS
- 5. APPLICATION FOR APPROVAL
- 6. APPROVAL
- 7. REQUIREMENTS
- 8. CONFORMITY OF PRODUCTION
- 9. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 10. MODIFICATION AND EXTENSION OF APPROVAL OF AN RUPD TYPE
- 11. PRODUCTION DEFINITELY DISCONTINUED
- 12. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- PART II: APPROVAL OF A VEHICLE WITH REGARD TO THE INSTALLATION OF AN RUPD OF AN APPROVED TYPE
- 13. DEFINITIONS
- 14. APPLICATION FOR APPROVAL
- 15. APPROVAL
- 16. REQUIREMENTS FOR INSTALLATION OF AN APPROVED RUPD
- 17. CONFORMITY OF PRODUCTION
- 18. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 19. MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE
- 20. PRODUCTION DEFINITELY DISCONTINUED
- 21. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- PART III: APPROVAL OF A VEHICLE WITH REGARD TO ITS REAR UNDERRUN PROTECTION (RUP)
- 22. DEFINITIONS
- 23. APPLICATION FOR APPROVAL
- 24. APPROVAL
- 25. REQUIREMENTS FOR RUP
- 26. CONFORMITY OF PRODUCTION
- 27. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 28. MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE TYPE
- 29. PRODUCTION DEFINITELY DISCONTINUED
- 30. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- PART IV: TRANSITIONAL PROVISIONS
- 31. TRANSITIONAL PROVISIONS
- ANNEX 1
- COMMUNICATION
- (maximum format: A4 (210 × 297 mm))
- ANNEX 2
- COMMUNICATION
- (maximum format: A4 (210 × 297 mm))
- ANNEX 3
- COMMUNICATION
- (maximum format: A4 (210 × 297 mm))
- ANNEX 4
- ARRANGEMENTS OF APPROVAL MARKS
- Model A
- (See paragraphs 6.4, 15.4, 24.4 of this Regulation)
- Model B
- (See paragraphs 6.5, 15.5, 24.5 of this Regulation)
- ANNEX 5
- TEST CONDITIONS AND PROCEDURES
- 1. TEST CONDITIONS FOR RUPDs
- 2. TEST CONDITIONS FOR VEHICLES
- 3. TEST PROCEDURE
- 3.2. Replacement force application points
Feedback