2024/2750

28.10.2024

COMMISSION IMPLEMENTING REGULATION (EU) 2024/2750

of 25 October 2024

granting a Union authorisation for the biocidal product family ‘LANXESS CMIT/MIT biocidal product family’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products (1), and in particular Article 44(5), first subparagraph, thereof,

Whereas:

(1) On 22 June 2017, Lanxess Deutschland GmbH submitted to the European Chemicals Agency (‘the Agency’) an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 for a Union authorisation of a biocidal product family named ‘LANXESS CMIT/MIT biocidal product family’ of product-types 6, 11, 12 and 13, as described in Annex V to that Regulation, providing written confirmation that the competent authority of the Netherlands had agreed to evaluate the application. The application was recorded under case number BC-HA032066-67 in the Register for Biocidal Products.

(2) ‘LANXESS CMIT/MIT biocidal product family’ contains ‘mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (Mixture of CMIT/MIT)’ as the active substance, included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-types 6, 11, 12 and 13.

(3) On 8 March 2023, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, an assessment report and the conclusions of its evaluation to the Agency.

(4) On 2 October 2023, the Agency submitted to the Commission its opinion (2), the draft summary of the biocidal product characteristics (‘SPC’) of ‘LANXESS CMIT/MIT biocidal product family’ and the final assessment report on the biocidal product family, in accordance with Article 44(3) of Regulation (EU) No 528/2012.

(5) The opinion concludes that ‘LANXESS CMIT/MIT biocidal product family’ is a biocidal product family within the meaning of Article 3(1), point (s), of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that, subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(1) and (6) of that Regulation.

(6) On 23 October 2023, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012.

(7) The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for ‘LANXESS CMIT/MIT biocidal product family’.

(8) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products,

HAS ADOPTED THIS REGULATION:

Article 1

A Union authorisation with authorisation number EU-0031652-0000 is hereby granted to Lanxess Deutschland GmbH for the making available on the market and use of the biocidal product family ‘LANXESS CMIT/MIT biocidal product family’ subject to compliance with the summary of the biocidal product characteristics set out in the Annex.

The Union authorisation is valid from 17 November 2024 to 31 October 2034.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the

Official Journal of the European Union

.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 25 October 2024.

For the Commission

The President

Ursula VON DER LEYEN

(1)  

OJ L 167, 27.6.2012, p. 1

, ELI:

http://data.europa.eu/eli/reg/2012/528/oj

.

(2)  Opinion of the Biocidal Products Committee of 13 September 2023 on the Union authorisation of ‘LANXESS CMIT/MIT biocidal product family’ (ECHA/BPC/391/2023),

https://echa.europa.eu/opinions-on-union-authorisation

.

ANNEX

Summary of product characteristics for a biocidal product family

LANXESS CMIT/MIT biocidal product family

Product type(s)

PT06: Preservatives for products during storage

PT11: Preservatives for liquid-cooling and processing systems

PT12: Slimicides

PT13: Working or cutting fluid preservatives

Authorisation number

EU-0031652-0000

R4BP asset number

EU-0031652-0000

PART I

FIRST INFORMATION LEVEL

1.   

ADMINISTRATIVE INFORMATION

1.1.   

Family name

1.2.   

Product type(s)

1.3.   

Authorisation holder

1.4.   

Manufacturer(s) of the product

1.5.   

Manufacturer(s) of the active substance(s)

2.   

PRODUCT FAMILY COMPOSITION AND FORMULATION

2.1.   

Qualitative and quantitative information on the composition of the family

2.2.   

Type(s) of formulation

PART II

SECOND INFORMATION LEVEL - META SPC(S)

1.   

META SPC 1 ADMINISTRATIVE INFORMATION

1.1.   

Meta SPC 1 identifier

1.2.   

Suffix to the authorisation number

1.3.   

Product type(s)

2.   

META SPC 1 COMPOSITION

2.1.   

Qualitative and quantitative information on the composition of the meta SPC 1

2.2.   

Type(s) of formulation of the meta SPC 1

3.   

HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1

4.   

AUTHORISED USE(S) OF THE META SPC

4.1.   

Use description

Table 1

In-can preservation of washing and cleaning fluids (PT 6)

4.1.1.   

Use-specific instructions

See general directions for use.

4.1.2.   

Use-specific risk mitigation measures

See general directions for use.

4.1.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.1.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.1.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.2.   

Use description

Table 2

In-can preservation of paints and coatings (PT 6)

4.2.1.   

Use-specific instructions

See general directions for use.

4.2.2.   

Use-specific risk mitigation measures

See general directions for use.

4.2.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.2.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.2.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.3.   

Use description

Table 3

In-can preservation of fluids used in paper production (PT 6)

4.3.1.   

Use-specific instructions

See general directions for use.

4.3.2.   

Use-specific risk mitigation measures

See general directions for use.

4.3.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.3.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.3.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.4.   

Use description

Table 4

In-can preservation of fluids used in textile production (PT 6)

4.4.1.   

Use-specific instructions

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used.

4.4.2.   

Use-specific risk mitigation measures

See general directions for use.

4.4.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.4.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.4.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.5.   

Use description

Table 5

In-can preservation of fluids used in leather production (PT 6)

4.5.1.   

Use-specific instructions

See general directions for use.

4.5.2.   Use-specific risk mitigation measures

See general directions for use.

4.5.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.5.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.5.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.6.   

Use description

Table 6

In-can preservation of glues and adhesives (PT 6)

4.6.1.   

Use-specific instructions

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used.

See general directions for use.

4.6.2.   

Use-specific risk mitigation measures

See general directions for use.

4.6.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.6.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.6.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.7.   

Use description

Table 7

In-can preservation of concrete additives and building material such as fillers/sealants, plasters and wax emulsions (PT 6) for indoor use

4.7.1.   

Use-specific instructions

See general directions for use.

4.7.2.   

Use-specific risk mitigation measures

See general directions for use.

4.7.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.7.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.7.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.8.   

Use description

Table 8

In-can preservation of polymer dispersions/emulsions intended for use in paints and coatings, glues and adhesives, building materials and fluids used in textile production (PT 6)

4.8.1.   

Use-specific instructions

See general directions for use.

4.8.2.   

Use-specific risk mitigation measures

See general directions for use.

4.8.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.8.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.8.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.9.   

Use description

Table 9

In-can preservation of mineral slurries (PT 6)

4.9.1.   

Use-specific instructions

See general directions for use.

4.9.2.   

Use-specific risk mitigation measures

See general directions for use.

4.9.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.9.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.9.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.10.   

Use description

Table 10

Preservation of open re-circulating systems (PT11)

4.10.1.   

Use-specific instructions

See general directions for use.

4.10.2.   

Use-specific risk mitigation measures

The use is restricted to small cooling systems with a maximum blowdown of 2 m3/h. Waste water must be discharged to the municipal sewer or purified in an on-site industrial sewage treatment plant including a biological treatment step. The product can only be applied when the cooling towers are equipped with drift eliminators that reduce drift with at least 99%.

See general directions for use.

4.10.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.10.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.10.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.11.   

Use description

Table 11

Preservation of cooling fluids in closed systems (PT11)

4.11.1.   

Use-specific instructions

See general directions for use.

4.11.2.   

Use-specific risk mitigation measures

See general directions for use.

4.11.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.11.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.11.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.12.   

Use description

Table 12

Preservation of other liquids in e.g. air conditioning systems, air washers and pasteurizers (PT 11)

4.12.1.   

Use-specific instructions

See general directions for use.

4.12.2.   

Use-specific risk mitigation measures

See general directions for use.

4.12.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.12.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.12.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.13.   

Use description

Table 13

Preservation of membrane module solutions (PT 11)

4.13.1.   

Use-specific instructions

During the shutdown of production, it is recommended to counteract microbiological growth inside the membrane elements. Before the shutdown, the plant has to be cleaned first, to remove all sorts of deposits like carbonates, salts, silica, organic matter or biomass. For this purpose, specialized membrane cleaners are used. After cleaning, the plant is flushed with permeate quality water until neutral pH is achieved. Only after these cleaning steps, CMIT/MIT containing water shall reach the plant and shall be regularly circulated by slow pumping. The biocidal product shall be added to the fill-water (permeate quality), to avoid microbiological growth during longer shut downs. During longer shut downs, the fill-water shall be regularly circulated by slow pumping and sampled to check for a microbiological re-contamination. A shift in pH can be a first indication of a re-contamination by microbiology. In this case the fill-up solution must be replaced.

See general directions for use.

4.13.2.   

Use-specific risk mitigation measures

See general directions for use.

4.13.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.13.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.13.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.14.   

Use description

Table 14

Preservation of white water circuits (short circulation) in paper industry (PT 12)

4.14.1.   

Use-specific instructions

See general directions for use.

4.14.2.   

Use-specific risk mitigation measures

Application is only allowed in paper factories that comply with the Industrial Emission Directive 2010/75/EU where wastewater is purified in an on-site industrial sewage treatment plant including a biological treatment step in accordance to the Best Available Techniques (BAT) as prescribed in the BAT-reference document (BREF) for the production of pulp, paper and board. The effluent must be diluted at least 200 times. Paper factories that are exempted from the Industrial Emission Directive must discharge to the municipal sewer.

See general directions for use.

4.14.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.14.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.14.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.15.   

Use description

Table 15

Preservation of liquids used to treat or cut metal and glass (PT 13)

4.15.1.   

Use-specific instructions

See general directions for use.

4.15.2.   

Use-specific risk mitigation measures

See general directions for use.

4.15.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.15.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.15.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 5.   

GENERAL DIRECTIONS FOR USE OF THE META SPC 1

5.1.   

Instructions for use

General instructions

Preliminary tests to determine suitability, compatibility and optimal concentration are recommended prior to the use of the product in a new application. For more technical information, see the currently valid product information sheet which will be provided to customers upon request.

The product labels give instructions on the dosage of the product.

General use information

PT 6

For the in-can preservation of washing and cleaning fluids, paints and coatings, fluids used in paper, textile and leather production, as well as glues and adhesives, concrete additives and building materials (e.g. fillers/sealants, plasters, wax emulsions), polymer dispersions/emulsions (intended for use in paints, coatings, glues, adhesives, building materials and fluids used in textile production) and the treatment of mineral slurries.

The product must be homogeneously incorporated into the matrix to be protected.

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used.

PT 11

For use as a biocide for the preservation of cooling fluids in circulating systems and other liquids in e.g. air conditioning systems, air washers and pasteurizers from infestation with harmful organisms such as bacteria (including Legionella), fungi, yeasts and algae. Furthermore, the applications covered by PT 11 comprise the preservation of membrane module solutions..

Heavily contaminated units shall be cleaned prior to treatment.

The biocidal product shall be added to the water circuit to be treated at a point at which a rapid and even distribution of the biocide can be ensured.

The microbiocidal effect begins immediately after metering.

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used. Due to variation in the different systems and matrices (organic load, microbial contamination, slime forming, temperature, pH, etc.) accurate measurements by chemical and microbiological tests shall be carried out to determine the effective dose for the specific location or system.

PT 12

For use as a biocide for the preservation of white water circuits (short circulation) in paper machines. Aim of the application is to prevent or combat slime formation (as caused by bacteria and fungi) on pipework and surfaces of materials and equipment in the paper area.

The microbiocidal effect begins immediately after metering.

The biocidal product shall be added to the white water circuit (short circulation) in paper machines to be treated at a point at which a rapid and even distribution of the biocide can be ensured.

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used.

PT 13

For use as a protective agent for the preservation of liquids used to treat or cut metal and glass. Aim of application is to prevent microbial deterioration caused by bacteria, fungi or yeasts.

The ready-to-use biocidal product, without former dilution or formulation, is directly applied into the ready to use metalworking fluid cycle to control microbial deterioration and to maintain the correct function of the metalworking fluid.

The microbiocidal effect begins immediately after metering.

The biocidal product is added to the metalworking circuit to be treated at a point at which a rapid and even distribution of the biocide can be ensured.

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used.

5.2.   

Risk mitigation measures

During product handling:

Wear protective gloves consistent with European Standard EN ISO 374 or equivalent, coverall (Chemical protection clothes type 6) consistent with European Standard EN ISO 13034 or equivalent and eye or face protection (recommended splash goggles or face shield) consistent with European Standard EN ISO 16321 or equivalent.

In case of C(M)IT/MIT concentrations ≥ 15 ppm:

During product handling, application and post-application: Wear protective chemical resistant gloves consistent with European Standard EN ISO 374 or equivalent and a protective coverall (at least type 6) consistent with European Standard EN ISO 13034 or equivalent which is impermeable for the biocidal product.

Equipment should preferably be cleaned with water. Dilute rinsing water sufficiently before disposal via a wastewater treatment plant.

Only vent waste air to the atmosphere via suitable separators or scrubbers. No special fire or explosion protection measures necessary.

Required Personal Protection Equipment is further described in Safety Data Sheet.

5.3.   

Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid measures

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water and continue rinsing for 15 minutes. Call a POISON CENTRE or a doctor.

Information to Healthcare personnel/doctor:

Initiate life support measures if needed, thereafter call a POISON CENTRE.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Particular environmental risks

Product containers shall be carefully handled, stored and transported to prevent damage to the containers and leakage of the product into soil, air and water. The biocidal product is harmful to aquatic organisms. The product is biodegradable following dilution.

5.4.   

Instructions for safe disposal of the product and its packaging

Disposal information

Check whether re-use of the product in the packaging is possible. Pack or seal product waste and contaminated empty containers, label, and discharge in accordance with refuse disposal acts.

In the case of larger amounts of product in the packaging, discuss with the supplier of the product. The recipient of contaminated empty containers must be informed of the possible risks due to product residues. In the case of disposal within the EU, use the respective valid waste code in accordance with the European Waste Catalogue (EWC). The producer of the waste is responsible for assigning sector- and process-specific waste codes to his waste in accordance with the European Waste Catalogue.

5.5.   

Conditions of storage and shelf-life of the product under normal conditions of storage

Shelf-life: 12 months.

Store in tightly sealed original containers. Protect from frost.

6.   

OTHER INFORMATION

With respect to the “Category (ies) of users” note: “Professionals (including industrial users) means trained professionals if this is required by national legislation.”

Resistance management for intended applications (PT 11, 12, 13):

— avoidance of under-dosing;

— frequent detection of efficacy and of biocide content in the industrial systems to assure maintenance of correct CMIT/MIT concentration;

— for new applications, preliminary tests to determine the suitability, compatibility and optimal application concentration are strongly recommended;

— under difficult conditions alternation of active ingredients, i.e. rotation with other biocides, also combination with other products may be useful.

Full titles of EN standards and legislation referred to in section 5.2:

EN ISO 374 – Protective gloves against dangerous chemicals and micro-organisms.

EN ISO 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) Beschermende kleding tegen vloeibare chemicaliën — Prestatie-eisen voor beschermende kleding tegen chemicaliën die beperkte bescherming tegen vloeibare chemicaliën biedt (type 6 en type PB [6] uitrusting)

EN ISO 16321 – Eye and face protection for occupational use

7.   

THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1

7.1.   

Trade name(s), authorisation number and specific composition of each individual product

7.2.   

Trade name(s), authorisation number and specific composition of each individual product

7.3.   

Trade name(s), authorisation number and specific composition of each individual product

7.4.   

Trade name(s), authorisation number and specific composition of each individual product

7.5.   

Trade name(s), authorisation number and specific composition of each individual product

1.   

META SPC 2 ADMINISTRATIVE INFORMATION

1.1.   

Meta SPC 2 identifier

1.2.   

Suffix to the authorisation number

1.3.   

Product type(s)

2.   

META SPC 2 COMPOSITION

2.1.   

Qualitative and quantitative information on the composition of the meta SPC 2

2.2.   

Type(s) of formulation of the meta SPC 2

3.   

HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2

4.   

AUTHORISED USE(S) OF THE META SPC

4.1.   

Use description

Table 1.

Preservation of cooling fluids in open recirculating systems (PT11)

4.1.1.   

Use-specific instructions

See general directions for use.

4.1.2.   

Use-specific risk mitigation measures

The use is restricted to small cooling systems with a maximum blowdown of 2 m3/h. Waste water shall be discharged to the municipal sewer or purified in an on-site industrial sewage treatment plant including a biological treatment step. The product shall only be applied when the cooling towers are equipped with drift eliminators that reduce drift with at least 99%.

See general directions for use.

4.1.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.1.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.1.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.2.   

Use description

Table 2

Preservation of cooling fluids in closed systems (PT 11)

4.2.1.   

Use-specific instructions

See general directions for use.

4.2.2.   

Use-specific risk mitigation measures

See general directions for use.

4.2.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.2.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.2.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 5.   

GENERAL DIRECTIONS FOR USE OF THE META SPC 2

5.1.   

Instructions for use

General instructions

Preliminary tests to determine suitability, compatibility and optimal concentration are recommended prior to the use of the product in a new application. For more technical information, see the currently valid product information sheet which will be provided to customers upon request.

The product labels give instructions on the dosage of the product.

General use information

PT 11

For use as a biocide for the preservation of cooling fluids in circulating systems from infestation with harmful organisms such as bacteria (including Legionella), fungi, yeasts and algae.

Heavily infested units shall be cleaned prior to treatment.

The biocidal product is added to the water circuit to be treated at a point at which a rapid and even distribution of the biocide can be ensured.

The microbiocidal effect begins immediately after metering.

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used.

5.2.   

Risk mitigation measures

During product handling:

Wear protective gloves consistent with European Standard EN ISO 374 or equivalent, coverall (Chemical protection clothes type 6) consistent with European Standard EN ISO 13034 or equivalent and eye or face protection (recommended splash goggles or face shield) consistent with European Standard EN ISO 16321 or equivalent.

In case of C(M)IT/MIT concentrations ≥ 15 ppm:

During product handling, application and post-application: Wear protective chemical resistant gloves consistent with European Standard EN ISO 374 or equivalent and a protective coverall (at least type 6) consistent with European Standard EN ISO 13034 or equivalent which is impermeable for the biocidal product.

Equipment should preferably be cleaned with water. Dilute rinsing water sufficiently before disposal via a wastewater treatment plant.

Only vent waste air to the atmosphere via suitable separators or scrubbers. No special fire or explosion protection measures necessary.

Required Personal Protection Equipment is described in Safety Data Sheet.

5.3.   

Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

First aid measures

IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance.

IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing.

If symptoms: Call 112/ambulance for medical assistance.

If no symptoms: Call a POISON CENTRE or a doctor.

IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.

IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.

Particular environmental risks

Product containers shall be carefully handled, stored and transported to prevent damage to the containers and leakage of the product into soil, air and water. The biocidal product is harmful to aquatic organisms. The product is biodegradable following dilution.

5.4.   

Instructions for safe disposal of the product and its packaging

Disposal information

Check whether re-use of the product in the packaging is possible. Pack or seal product waste and contaminated empty containers, label, and discharge in accordance with refuse disposal acts.

In the case of larger amounts of product in the packaging, discuss with the supplier of the product. The recipient of contaminated empty containers shall be informed of the possible risks due to product residues. In the case of disposal within the EU, use the respective valid waste code in accordance with the European Waste Catalogue (EWC). The producer of the waste is responsible for assigning sector- and process-specific waste codes to his waste in accordance with the European Waste Catalogue.

5.5.   

Conditions of storage and shelf-life of the product under normal conditions of storage

Shelf-life: 12 months.

Store in tightly sealed original containers. Protect from frost.

6.   

OTHER INFORMATION

With respect to the “Category (ies) of users” note: “Professionals (including industrial users) means trained professionals if this is required by national legislation.”

Resistance management for intended applications (PT 11):

— avoidance of under-dosing;

— frequent detection of efficacy and of biocide content in the industrial systems to assure maintenance of correct CMIT/MIT concentration;

— for new applications, preliminary tests to determine the suitability, compatibility and optimal application concentration are strongly recommended;

— under difficult conditions alternation of active ingredients, i.e. rotation with other biocides, also combination with other products may be useful.

Full titles of EN standards and legislation referred to in section 5.2:

EN ISO 374 – Protective gloves against dangerous chemicals and micro-organisms.

EN ISO 13034 - Protective clothing against liquid chemicals - Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

EN ISO 16321 – Eye and face protection for occupational use

7.   

THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2

7.1.   

Trade name(s), authorisation number and specific composition of each individual product

7.2.   

Trade name(s), authorisation number and specific composition of each individual product

1.   

META SPC 3 ADMINISTRATIVE INFORMATION

1.1.   

Meta SPC 3 identifier

1.2.   

Suffix to the authorisation number

1.3.   

Product type(s)

2.   

META SPC 3 COMPOSITION

2.1.   

Qualitative and quantitative information on the composition of the meta SPC 3

2.2.   

Type(s) of formulation of the meta SPC 3

3.   

HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3

4.   

AUTHORISED USE(S) OF THE META SPC

4.1.   

Use description

Table 1

In-can preservation of washing and cleaning fluids (PT 6)

4.1.1.   

Use-specific instructions

See general directions for use.

4.1.2.   

Use-specific risk mitigation measures

See general directions for use.

4.1.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.1.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.1.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.2.   

Use description

Table 2

In-can preservation of paints and coatings (PT 6)

4.2.1.   

Use-specific instructions

See general directions for use.

4.2.2.   

Use-specific risk mitigation measures

See general directions for use.

4.2.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.2.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.2.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.3.   

Use description

Table 3

In-can preservation of fluids used in paper production (PT 6)

4.3.1.   

Use-specific instructions

See general directions for use.

4.3.2.   

Use-specific risk mitigation measures

See general directions for use.

4.3.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.3.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.3.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.4.   

Use description

Table 4

In-can preservation of fluids used in textile production (PT 6)

4.4.1.   

Use-specific instructions

See general directions for use.

4.4.2.   

Use-specific risk mitigation measures

See general directions for use.

4.4.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.4.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.4.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.5.   

Use description

Table 5

In-can preservation of fluids used in leather production (PT 6)

4.5.1.   

Use-specific instructions

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used.

See general directions for use.

4.5.2.   

Use-specific risk mitigation measures

See general directions for use.

4.5.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.5.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.5.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.6.   

Use description

Table 6

In-can preservation of glues and adhesives (PT 6)

4.6.1.   

Use-specific instructions

See general directions for use.

4.6.2.   

Use-specific risk mitigation measures

See general directions for use.

4.6.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.6.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.6.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.7.   

Use description

Table 7

In-can preservation of concrete additives and building material such as fillers/sealants, plasters and wax emulsions (PT 6) for indoor use

4.7.1.   

Use-specific instructions

See general directions for use.

4.7.2.   

Use-specific risk mitigation measures

See general directions for use.

4.7.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.7.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.7.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.8.   

Use description

Table 8

In-can preservation of polymer dispersions/emulsions intended for use in paints and coatings, glues and adhesives, building materials and fluids used in textile production (PT 6)

4.8.1.   

Use-specific instructions

See general directions for use.

4.8.2.   

Use-specific risk mitigation measures

See general directions for use.

4.8.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.8.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.8.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.9.   

Use description

Table 9

In-can preservation of mineral slurries (PT 6)

4.9.1.   

Use-specific instructions

See general directions for use.

4.9.2.   

Use-specific risk mitigation measures

See general directions for use.

4.9.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.9.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.9.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.10.   

Use description

Table 10

Preservation of cooling fluids in open circulating systems (PT 11)

4.10.1.   

Use-specific instructions

See general directions for use.

4.10.2.   

Use-specific risk mitigation measures

The use is restricted to small cooling systems with a maximum blowdown of 2 m3/h. Waste water must be discharged to the municipal sewer or purified in an on-site industrial sewage treatment plant including a biological treatment step. The product shall only be applied when the cooling towers are equipped with drift eliminators that reduce drift with at least 99%.

See general directions for use.

4.10.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.10.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.10.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.11.   

Use description

Table 11

Preservation of cooling fluids in closed systems (PT 11)

4.11.1.   

Use-specific instructions

See general directions for use.

4.11.2.   

Use-specific risk mitigation measures

See general directions for use.

4.11.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.11.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.11.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.12.   

Use description

Table 12

Preservation of other liquids in e.g. air conditioning systems, air washers and pasteurizers (PT 11)

4.12.1.   

Use-specific instructions

See general directions for use.

4.12.2.   

Use-specific risk mitigation measures

See general directions for use.

4.12.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.12.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.12.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.13.   

Use description

Table 13

Preservation of wood preservative treatment solutions (PT 11)

4.13.1.   

Use-specific instructions

See general directions for use.

4.13.2.   

Use-specific risk mitigation measures

The product shall not be applied to wood preservative treatment solutions which are used to preserve wood intended for direct contact with water or soils (use class 4).

Freshly treated timber must be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil, sewer or water and that any losses shall be collected for reuse or disposal.

See general directions for use.

4.13.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.13.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.13.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.14.   

Use description

Table 14

Preservation of membrane module solutions (PT 11)

4.14.1.   

Use-specific instructions

During the shutdown of production, it is recommended to counteract microbiological growth inside the membrane elements. Before the shutdown, the plant shall be cleaned first, to remove all sorts of deposits like carbonates, salts, silica, organic matter or biomass. For this purpose, specialized membrane cleaners are used. After cleaning, the plant is flushed with permeate quality water until neutral pH is achieved. Only after these cleaning steps, CMIT/MIT containing water is reaching the plant and is regularly circulated by slow pumping. The biocidal product shall be added to the fill-water (permeate quality), to avoid microbiological growth during longer shutdowns. During longer shutdowns, the fill-water shall be regularly circulated by slow pumping and sampled to check for a microbiological re-contamination. A shift in pH can be a first indication of a re-contamination by microbiology. In this case the fill-up solution shall be replaced.

See general directions for use.

4.14.2.   

Use-specific risk mitigation measures

See general directions for use.

4.14.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.14.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.14.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.15.   

Use description

Table 15

Preservation of white water circuits (short circulation) in paper industry (PT 12)

4.15.1.   

Use-specific instructions

See general directions for use.

4.15.2.   

Use-specific risk mitigation measures

Application is only allowed in paper factories that comply with the Industrial Emission Directive 2010/75/EU where wastewater is purified in an on-site industrial sewage treatment plant including a biological treatment step in accordance to the Best Available Techniques (BAT) as prescribed in the BAT-reference document (BREF) for the production of pulp, paper and board. The effluent must be diluted at least 200 times. Paper factories that are exempted from the Industrial Emission Directive shall discharge to the municipal sewer.

See general directions for use.

4.15.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.15.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.15.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 4.16.   

Use description

Table 16

Preservation of liquids used to treat or cut metal and glass (PT 13)

4.16.1.   

Use-specific instructions

See general directions for use.

4.16.2.   

Use-specific risk mitigation measures

See general directions for use.

4.16.3.   

Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment

- 4.16.4.   

Where specific to the use, the instructions for safe disposal of the product and its packaging

- 4.16.5.   

Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage

- 5.   

GENERAL DIRECTIONS FOR USE OF THE META SPC 3

5.1.   

Instructions for use

General instructions

Preliminary tests to determine suitability, compatibility and optimal concentration are recommended prior to the use of the product in a new application. For more technical information, see the currently valid product information sheet which will be provided to the customer on request.

The product labels give instructions on the dosage of the product.

General use information

PT 6

For the in-can preservation of washing and cleaning fluids, paints and coatings, fluids used in paper, textile and leather production, as well as glues and adhesives, concrete additives and building materials (e.g. fillers/sealants, plasters, wax emulsions), polymer dispersions/ emulsions (intended for use in paints, coatings, glues, adhesives, building materials and fluids used in textile production) and the treatment of mineral slurries.

The product must be homogeneously incorporated into the matrix to be protected.

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used.

PT 11

For use as a biocide for the preservation of cooling fluids in circulating systems and other liquids in e.g. air conditioning systems, air washers and pasteurizers from infestation with harmful organisms such as bacteria (including Legionella), fungi, yeasts and algae. Furthermore, the applications covered by PT 11 comprise the preservation of membrane module solutions and wood preservative treatment solutions.

Heavily contaminated units shall be cleaned prior to treatment.

The biocidal product is added to the water circuit to be treated at a point at which a rapid and even distribution of the biocide can be ensured.

The microbiocidal effect begins immediately after metering.

The dose strongly depends on the formulation and intended use of the product to which the preservative is added. Therefore, the user shall determine dosage requirements for their specific matrix/system to be preserved. The lowest effective dose shall be used. Due to variation in the different systems and matrices (organic load, microbial contamination, slime forming, temperature , pH, etc.) accurate measurements by chemical and microbiological tests shall be carried out to determine the effective dose for the specific location or system.

PT 12