COMMISSION IMPLEMENTING DECISION (EU) 2019/784
of 14 May 2019
on harmonisation of the 24,25-27,5 GHz frequency band for terrestrial systems capable of providing wireless broadband electronic communications services in the Union
(notified under document C(2019) 3450)
(Text with EEA relevance)
Article 1
Article 2
Article 3
Article 4
Article 5
Article 6
Article 7
Article 8
ANNEX
TECHNICAL CONDITIONS REFERRED TO IN ARTICLES 2 AND 3
1.
Definitions
2.
General Parameters
Figure 1
Example of a channelling arrangement within the 24,25-27,5 GHz frequency band
3.
Technical conditions for base stations — Block Edge Mask
Figure 2
Illustration of a block edge mask
BEM element |
Definition |
In-block |
Assigned spectrum block for which the BEM is derived. |
Baseline |
Spectrum within the 24,25-27,5 GHz frequency band used for terrestrial wireless broadband electronic communications services, not including the operator's block under consideration and corresponding transitional regions. |
Transitional region |
Spectrum adjacent to an operator's block. |
Additional baseline |
Spectrum within bands adjacent to the 24,25-27,5 GHz frequency band, where specific power limits apply with respect to other services or applications. |
Frequency range |
Maximum TRP |
Measurement bandwidth |
Up to 50 MHz below or above an operator's block |
12 dBm |
50 MHz |
Frequency range |
Maximum TRP |
Measurement bandwidth |
Baseline |
4 dBm |
50 MHz |
Frequency range |
Maximum TRP |
Measurement bandwidth |
23,6-24,0 GHz |
– 42 dBW |
200 MHz |
Table 5
Additional condition applying to AAS outdoor base stations
Requirement on elevation of the main beam of AAS outdoor base stations
4.
Technical conditions for terminal stations
Frequency range |
Maximum TRP |
Measurement bandwidth |
23,6-24,0 GHz |
– 38 dBW |
200 MHz |