COMMISSION IMPLEMENTING DECISION (EU) 2020/1630

of 3 November 2020

amending Implementing Decision (EU) 2019/1326 as regards the electromagnetic compatibility of industrial, scientific and medical equipment, household appliances, electric tools and similar apparatus, electrical lighting and similar equipment, multimedia equipment, switchgear and controlgear

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (1), and in particular Article 10(6) thereof,

Whereas:

(1) In accordance with Article 13 of Directive 2014/30/EU of the European Parliament and of the Council (2), electrical equipment which is in conformity with harmonised standards or parts thereof, the references of which have been published in the

Official Journal of the European Union

, are to be presumed to be in conformity with the essential requirements covered by those standards or parts thereof set out in Annex I to that Directive.

(2) By Implementing Decision C(2016) 7641 (3), the Commission made a request to the European Committee for Standardisation (CEN), the European Committee for Electrotechnical Standardisation (Cenelec) and the European Telecommunications Standards Institute (ETSI) for the drafting and revision of harmonised standards for electromagnetic compatibility in support of Directive 2014/30/EU.

(3) On the basis of the request set out in Implementing Decision C(2016) 7641, CEN and Cenelec revised the following harmonised standards, the references of which are published in the C series of the

Official Journal of the European Union

(4): EN 55011:2009, EN 55014-1:2006, EN 55015:2013 and EN 55032:2012. This resulted in the adoption of, respectively, the following harmonised standards and amendments thereto: EN 55011:2016, EN 55011:2016/A1:2017 and EN 55011:2016/A11:2020 for industrial, scientific and medical equipment; EN 55014-1:2017 and EN 55014-1:2017/A11:2020 for household appliances, electric tools and similar apparatus; EN IEC 55015:2019 and EN IEC 55015:2019/A11:2020 for electrical lighting and similar equipment; and EN 55032:2015 and EN 55032:2015/A11:20 for multimedia equipment.

(4) On the basis of the request set out in Implementing Decision C(2016) 7641, CEN and Cenelec amended harmonised standard EN 62026-2:2013, the reference of which is published in the C series of the

Official Journal of the European Union

(5). This resulted in the adoption of harmonised standard EN 62026-2:2013/A1:2019.

(5) The Commission, together with CEN and Cenelec, has assessed whether those harmonised standards comply with the request set out in Implementing Decision C(2016) 7641.

(6) The harmonised standards EN 55011:2016 as amended by EN 55011:2016/A1:2017 and EN 55011:2016/A11:2020, EN 55014-1:2017 as amended by EN 55014-1:2017/A11:2020, EN IEC 55015:2019 as amended by EN IEC 55015:2019/A11:2020, EN 55032:2015 as amended by EN 55032:2015/A11:2020, and EN 62026-2:2013 as amended by EN 62026-2:2013/A1:2019 satisfy the essential requirements which they aim to cover and which are set out in Directive 2014/30/EU. It is therefore appropriate to publish the references of those harmonised standards, together with the relevant amending standards thereto, in the

Official Journal of the European Union

(7) Annex I to Commission Implementing Decision (EU) 2019/1326 (6) lists the references of harmonised standards conferring a presumption of conformity with Directive 2014/30/EU. In order to ensure that the references of harmonised standards drafted in support of Directive 2014/30/EU are listed in one act, the references of those standards, together with the references of the relevant amending standards thereto, should be included in that Annex.

(8) It is therefore necessary to withdraw from the C series of the

Official Journal of the European Union

the references of the following harmonised standards, together with the references of the relevant amending or correcting standards thereto: EN 55011:2009 as amended by EN 55011:2009/A1:2010, EN 55014-1:2006 as amended by EN 55014-1:2006/A1:2009 and EN 55014-1:2006/A2:2011, EN 55015:2013, EN 55032:2012 as corrected by EN 55032:2012/AC:2013, and EN 62026-2:2013.

(9) Annex II to Implementing Decision (EU) 2019/1326 lists the references of harmonised standards drafted in support of Directive 2014/30/EU that are withdrawn from the C series of the

Official Journal of the European Union

. It is therefore appropriate to include those references, together with the references of the relevant amending or correcting standards thereto, in that Annex.

(10) In order to give manufacturers sufficient time to prepare for application of harmonised standards EN 55011:2016 as amended by EN 55011:2016/A1:2017 and EN 55011:2016/A11:2020, EN 55014-1:2017 as amended by EN 55014-1:2017/A11:2020, EN IEC 55015:2019 as amended by EN IEC 55015:2019/A11:2020, EN 55032:2015 as amended by EN 55032:2015/A11:2020, and EN 62026-2:2013 as amended by EN 62026-2:2013/A1:2019, it is necessary to defer the withdrawal of the references of the following harmonised standards, together with the references of the relevant amending or correcting standards thereto: EN 55011:2009 as amended by EN 55011:2009/A1:2010, EN 55014-1:2006 as amended by EN 55014-1:2006/A1:2009 and EN 55014-1:2006/A2:2011, EN 55015:2013, EN 55032:2012 as corrected by EN 55032:2012/AC:2013, and EN 62026-2:2013.

(11) Implementing Decision (EU) 2019/1326 should therefore be amended accordingly.

(12) Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the

Official Journal of the European Union

. This Decision should therefore enter into force on the day of its publication,

HAS ADOPTED THIS DECISION:

Article 1

Annex I to Implementing Decision (EU) 2019/1326 is amended in accordance with Annex I to this Decision.

Article 2

Annex II to Implementing Decision (EU) 2019/1326 is amended in accordance with Annex II to this Decision.

Article 3

This Decision shall enter into force on the day of its publication in the

Official Journal of the European Union

Done at Brussels, 3 November 2020.

For the Commission

The President

Ursula VON DER LEYEN

(1)

OJ L 316, 14.11.2012, p. 12

(2) Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (

OJ L 96, 29.3.2014, p. 79

(3) Commission Implementing Decision C(2016) 7641 of 30 November 2016 on a standardisation request to the European Committee for Standardisation, to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards harmonised standards in support of Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility.

(4)

OJ C 246, 13.7.2018, p. 1

(5)

OJ C 246, 13.7.2018, p. 1

(6) Commission Implementing Decision (EU) 2019/1326 of 5 August 2019 on the harmonised standards for electromagnetic compatibility drafted in support of Directive 2014/30/EU of the European Parliament and of the Council (

OJ L 206, 6.8.2019, p. 27

ANNEX I

In Annex I to Implementing Decision (EU) 2019/1326, the following entries are added:

No	Reference of the standard
‘10.	EN 55011:2016 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement EN 55011:2016/A1:2017 EN 55011:2016/A11:2020
11.	EN 55014-1:2017 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission EN 55014-1:2017/A11:2020
12.	EN IEC 55015:2019 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment EN IEC 55015:2019/A11:2020
13.	EN 55032:2015 Electromagnetic compatibility of multimedia equipment – Emission Requirements EN 55032:2015/A11:2020
14.	EN 62026-2:2013 Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 2: Actuator sensor interface (AS-i) EN 62026-2:2013/A1:2019’.

ANNEX II

In Annex II to Implementing Decision (EU) 2019/1326, the following entries are added:

No	Reference of the standard	Date of withdrawal
‘7.	EN 55011:2009 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement EN 55011:2009/A1:2010	4 May 2022
8.	EN 55014-1:2006 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emission EN 55014-1:2006/A1:2009 EN 55014-1:2006/A2:2011	4 May 2022
9.	EN 55015:2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment	4 May 2022
10.	EN 55032:2012 Electromagnetic compatibility of multimedia equipment – Emission Requirements EN 55032:2012/AC:2013	4 May 2022
11.	EN 62026-2:2013 Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 2: Actuator sensor interface (AS-i)	4 May 2022’