COMMISSION IMPLEMENTING REGULATION (EU) 2020/1991
of 27 November 2020
granting a Union authorisation for the biocidal product family ‘perform-IPA’
(Text with EEA relevance)
Article 1
Article 2
ANNEX
Summary of product characteristics for a biocidal product family
PART I
FIRST INFORMATION LEVEL
1.
ADMINISTRATIVE INFORMATION
1.1.
Family name
Name |
perform-IPA |
1.2.
Product type(s)
Product type(s) |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) PT04 - Food and feed area (Disinfectants) |
1.3.
Authorisation holder
Name and address of the authorisation holder |
Name |
Schülke & Mayr GmbH |
Address |
Robert-Koch-Str. 2, 22851 Norderstedt, Germany |
|
Authorisation number |
EU-0023656-0000 |
|
R4BP asset number |
EU-0023656-0000 |
|
Date of the authorisation |
27 December 2020 |
|
Expiry date of the authorisation |
30 November 2030 |
1.4.
Manufacturer(s) of the biocidal products
Name of manufacturer |
Schülke & Mayr GmbH |
Address of manufacturer |
Robert-Koch-Str. 2, 22851 Norderstedt, Germany |
Location of manufacturing sites |
Robert-Koch-Str. 2, 22851 Norderstedt, Germany |
Name of manufacturer |
BOCHEMIE a.s. |
Address of manufacturer |
Lidická 326, 735 95 Bohumín Czech Republic |
Location of manufacturing sites |
Lidická 326, 735 95 Bohumín Czech Republic |
Name of manufacturer |
Imeco |
Address of manufacturer |
Boschstr. 5, 63768 Hösbach Germany |
Location of manufacturing sites |
Boschstr. 5, 63768 Hösbach Germany Neue Straße 2-4, 09471 Köningswalde Germany |
Name of manufacturer |
Tristel Solutions Limited |
Address of manufacturer |
Lynx Business Park, Fordham Road, Snailwell, CB8 7NY Cambridgeshire United Kingdom |
Location of manufacturing sites |
Lynx Business Park, Fordham Road, Snailwell, CB8 7NY Cambridgeshire United Kingdom |
Name of manufacturer |
Techtex |
Address of manufacturer |
Units 7&8 Rhodes Bus. Park Silburn Way, M24 4NE Middleton United Kingdom |
Location of manufacturing sites |
Units 7&8 Rhodes Bus. Park Silburn Way, M24 4NE Middleton United Kingdom |
Name of manufacturer |
A.F.P. GmbH |
Address of manufacturer |
Otto Brenner Straße 16, 21337 Lüneburg Germany |
Location of manufacturing sites |
Otto Brenner Straße 16, 21337 Lüneburg Germany |
Name of manufacturer |
Innovate GmbH |
Address of manufacturer |
Am Hohen Stein 11, 06618 Naumburg (Saale) Germany |
Location of manufacturing sites |
Am Hohen Stein 11, 06618 Naumburg (Saale) Germany |
Name of manufacturer |
Lysoform Dr. Hans Rosemann GmbH |
Address of manufacturer |
Kaiser-Wilhelm-Straße 133, 12247 Berlin Germany |
Location of manufacturing sites |
Kaiser-Wilhelm-Straße 133, 12247 Berlin Germany |
Name of manufacturer |
Sterisol AB |
Address of manufacturer |
Kronoängsgatan 3, 592 23 Vadstena Sweden |
Location of manufacturing sites |
Kronoängsgatan 3, 592 23 Vadstena Sweden |
Name of manufacturer |
Rudolf Dankwardt GmbH |
Address of manufacturer |
Gutenbergring 50-52, 22848 Norderstedt Germany |
Location of manufacturing sites |
Gutenbergring 50-52, 22848 Norderstedt Germany Lagerstr. 15, 19249 Jessenitz - Werk / Lübtheen Germany |
1.5.
Manufacturer(s) of the active substance(s)
Active substance |
Propan-2-ol |
Name of manufacturer |
Ineos Solvents Germany GmbH (formerly Sasol) |
Address of manufacturer |
Römerstraße 733, 47443 Moers Germany |
Location of manufacturing sites |
Römerstraße 733, 47443 Moers Germany Shamrockstr. 88, 44643 Herne Germany |
Active substance |
Propan-2-ol |
Name of manufacturer |
Shell Chemicals Europe B.V. |
Address of manufacturer |
Postbus 2334, 3000 CH Rotterdam Netherlands |
Location of manufacturing sites |
Shell Nederland Raffinaderij B.V., Vondelingenweg 601, 3196 KK Rotterdam-Pernis Netherlands |
2.
PRODUCT FAMILY COMPOSITION AND FORMULATION
2.1.
Qualitative and quantitative information on the composition of the family
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation
Formulation(s) |
Any other liquid (AL), ready-to-use Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation |
PART II
SECOND INFORMATION LEVEL – META SPC(S)
META SPC 1
1.
META SPC 1 ADMINISTRATIVE INFORMATION
1.1.
Meta SPC 1 identifier
Identifier |
meta SPC 1 perform IPA liquid |
1.2.
Suffix to the authorisation number
Number |
1-1 |
1.3.
Product type(s)
Product type(s) |
PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
2.
META SPC 1 COMPOSITION
2.1.
Qualitative and quantitative information on the composition of the meta SPC 1
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation of the meta SPC 1
Formulation(s) |
Any other liquid (AL), ready-to-use |
3.
HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1
Hazard statements |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
Precautionary statements |
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists: Get medical advice. If eye irritation persists: Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents to /container to an approved waste disposal plant. |
4.
AUTHORISED USE(S) OF THE META SPC 1
4.1.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Spraying Product will be sprayed directly on the surface |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. Disinfection after each production and cleaning process or when required according to standard operating procedure (SOP) |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 250-1000 ml packaging material: high-density polyethylene (HDPE), surlyn/polypropylene (PP) closure material is either: PP, polyoxymethylene (POM), low-density polyethylene (LDPE), HDPE, polyethylene (PE), ethylene-vinyl acetate (EVA), stainless steel, polybutylene terephthalate (PBT), (LD)PE, exp. polytetrafluoroethylene (PTFE), linear low density polyethylene (LLDPE), expanded PE (EXPPE), Co Polymer PP canister: 5-10 L packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 L packaging material: EVA closure material: PP/Silicone/EVA |
4.1.1.
Use-specific instructions for use
4.1.2.
Use-specific risk mitigation measures
4.1.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.1.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.1.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.2.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface. |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. Disinfection after each production and cleaning process or when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP. canister: 5-10 L packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 L packaging material: EVA closure material: PP/Silicone/EVA. |
4.2.1.
Use-specific instructions for use
4.2.2.
Use-specific risk mitigation measures
4.2.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.2.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.2.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.3.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Spraying Product will be sprayed directly on the surface. |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. Disinfection after each production and cleaning process or when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP. canister: 5-10 L packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 L packaging material: EVA closure material: PP/Silicone/EVA. |
4.3.1.
Use-specific instructions for use
4.3.2.
Use-specific risk mitigation measures
4.3.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.3.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.3.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.4.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface. |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. Disinfection after each production and cleaning process or when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP. canister: 5-10 L packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 L packaging material: EVA closure material: PP/Silicone/EVA. |
4.4.1.
Use-specific instructions for use
4.4.2.
Use-specific risk mitigation measures
4.4.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.4.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.4.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
5.
GENERAL DIRECTIONS FOR USE
(1)
OF THE META SPC 1
5.1.
Instructions for use
5.2.
Risk mitigation measures
5.3.
Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
5.4.
Instructions for safe disposal of the product and its packaging
- 5.5.
Conditions of storage and shelf-life of the product under normal conditions of storage
6.
OTHER INFORMATION
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1
7.1.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
perform® sterile alcohol IPA perform® classic alcohol IPA buraton® IPA perform® advanced alcohol IPA arcana® IPA clear IPA pure IPA disinfectant IPA Surface disinfection liquid classic sterile IPA mikrozid® sterile liquid Surface disinfection liquid sterile BTS 6000 |
||||
Authorisation number |
EU-0023656-0001 1-1 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
META SPC 2
1.
META SPC 2 ADMINISTRATIVE INFORMATION
1.1.
Meta SPC 2 identifier
Identifier |
meta SPC 2 perform wipes IPA |
1.2.
Suffix to the authorisation number
Number |
1-2 |
1.3.
Product type(s)
Product type(s) |
PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
2.
META SPC 2 COMPOSITION
2.1.
Qualitative and quantitative information on the composition of the meta SPC 2
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation of the meta SPC 2
Formulation(s) |
Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation |
3.
HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2
Hazard statements |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
Precautionary statements |
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists: Get medical advice. If eye irritation persists: Get medical attention. In case of fire: Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents /container to an approved waste disposal plant. |
4.
AUTHORISED USE(S) OF THE META SPC 2
4.1.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes Disinfection after each production and cleaning process or when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; biaxially oriented polypropylene (BOPP) + cast polypropylene (CPP) Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 |
4.1.1.
Use-specific instructions for use
4.1.2.
Use-specific risk mitigation measures
4.1.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.1.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.1.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.2.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes Disinfection after each production and cleaning process or when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 |
4.2.1.
Use-specific instructions for use
4.2.2.
Use-specific risk mitigation measures
4.2.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.2.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.2.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
5.
GENERAL DIRECTIONS FOR USE
(2)
OF THE META SPC 2
5.1.
Instructions for use
5.2.
Risk mitigation measures
5.3.
Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
5.4.
Instructions for safe disposal of the product and its packaging
- 5.5.
Conditions of storage and shelf-life of the product under normal conditions of storage
6.
OTHER INFORMATION
7.
THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2
7.1.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
perform classic wipes IPA buraton® wipes IPA perform® advanced wipes IPA arcana® wipes IPA clear IPA wipes pure IPA wipes disinfectant IPA wipes Surface disinfection wipes classic perform® sterile wipes IPA sterile IPA wipes mikrozid® sterile wipes Surface disinfection wipes sterile |
||||
Authorisation number |
EU-0023656-0002 1-2 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
META SPC 3
1.
META SPC 3 ADMINISTRATIVE INFORMATION
1.1.
Meta SPC 3 identifier
Identifier |
meta SPC 3 mikrozid liquid |
1.2.
Suffix to the authorisation number
Number |
1-3 |
1.3.
Product type(s)
Product type(s) |
PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
2.
META SPC 3 COMPOSITION
2.1.
Qualitative and quantitative information on the composition of the meta SPC 3
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation of the meta SPC 3
Formulation(s) |
Any other liquid (AL), ready-to-use |
3.
HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3
Hazard statements |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
Precautionary statements |
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists: Get medical advice. If eye irritation persists: Get medical attention. In case of fire: Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents /container to an approved waste disposal plant. |
4.
AUTHORISED USE(S) OF THE META SPC 3
4.1.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Spraying Product will be sprayed directly on the surface |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. Disinfection when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP canister: 5-10 L packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 L packaging material: EVA Closure : PP/Silicone/EVA |
4.1.1.
Use-specific instructions for use
4.1.2.
Use-specific risk mitigation measures
4.1.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.1.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.1.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.2.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on the surface. |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. Disinfection when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP canister: 5-10 L packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 L packaging material: EVA Closure : PP/Silicone/EVA |
4.2.1.
Use-specific instructions for use
4.2.2.
Use-specific risk mitigation measures
4.2.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.2.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.2.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.3.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Spraying Product will be sprayed directly on the surface. |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. Disinfection when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP canister: 5-10 L packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 L packaging material: EVA Closure : PP/Silicone/EVA |
4.3.1.
Use-specific instructions for use
4.3.2.
Use-specific risk mitigation measures
4.3.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.3.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.3.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.4.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be sprayed or poured on the surface and wiped afterwards or the wipe will be wetted by spraying or pouring with the product and thereafter the product should be wiped on surface. |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. Disinfection when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 250-1000 ml packaging material: HDPE, surlyn/PP closure material is either: PP, POM, LDPE, HDPE, PE, EVA, stainless steel, PBT, (LD)PE, exp. PTFE, LLDPE, EXPPE, Co Polymer PP canister: 5-10 L packaging material: HDPE. closure material is either: HDPE/LDPE Revolver BAG: 1 L packaging material: EVA closure material: PP/Silicone/EVA |
4.4.1.
Use-specific instructions for use
4.4.2.
Use-specific risk mitigation measures
4.4.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.4.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.4.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
5.
GENERAL DIRECTIONS FOR USE
(3)
OF THE META SPC 3
5.1.
Instructions for use
5.2.
Risk mitigation measures
5.3.
Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
5.4.
Instructions for safe disposal of the product and its packaging
- 5.5.
Conditions of storage and shelf-life of the product under normal conditions of storage
6.
OTHER INFORMATION
7.
THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3
7.1.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
mikrozid® classic liquid mikrozid® IPA liquid Surface Disinfection liquid pure |
||||
Authorisation number |
EU-0023656-0003 1-3 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
META SPC 4
1.
META SPC 4 ADMINISTRATIVE INFORMATION
1.1.
Meta SPC 4 identifier
Identifier |
meta SPC 4 mikrozid wipes |
1.2.
Suffix to the authorisation number
Number |
1-4 |
1.3.
Product type(s)
Product type(s) |
PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
2.
META SPC 4 COMPOSITION
2.1.
Qualitative and quantitative information on the composition of the meta SPC 4
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation of the meta SPC 4
Formulation(s) |
Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation |
3.
HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4
Hazard statements |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
Precautionary statements |
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists: Get medical advice. If eye irritation persists: Get medical attention. In case of fire: Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents /container to an approved waste disposal plant. |
4.
AUTHORISED USE(S) OF THE META SPC 4
4.1.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes Disinfection when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 |
4.1.1.
Use-specific instructions for use
4.1.2.
Use-specific risk mitigation measures
4.1.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.1.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.1.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.2.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes Disinfection when required according to SOP. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 |
4.2.1.
Use-specific instructions for use
4.2.2.
Use-specific risk mitigation measures
4.2.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.2.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.2.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
5.
GENERAL DIRECTIONS FOR USE
(4)
OF THE META SPC 4
5.1.
Instructions for use
5.2.
Risk mitigation measures
5.3.
Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
5.4.
Instructions for safe disposal of the product and its packaging
- 5.5.
Conditions of storage and shelf-life of the product under normal conditions of storage
6.
OTHER INFORMATION
7.
THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4
7.1.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
mikrozid® classic wipes mikrozid® IPA wipes surface disinfection wipes classic |
||||
Authorisation number |
EU-0023656-0004 1-4 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
META SPC 5
1.
META SPC 5 ADMINISTRATIVE INFORMATION
1.1.
Meta SPC 5 identifier
Identifier |
meta SPC 5 kodan wipes IPA pro |
1.2.
Suffix to the authorisation number
Number |
1-5 |
1.3.
Product type(s)
Product type(s) |
PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
2.
META SPC 5 COMPOSITION
2.1.
Qualitative and quantitative information on the composition of the meta SPC 5
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation of the meta SPC 5
Formulation(s) |
Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation |
3.
HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5
Hazard statements |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
Precautionary statements |
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists: Get medical advice. If eye irritation persists: Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents /container to an approved waste disposal plant. |
4.
AUTHORISED USE(S) OF THE META SPC 5
4.1.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 |
4.1.1.
Use-specific instructions for use
4.1.2.
Use-specific risk mitigation measures
4.1.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.1.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.1.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.2.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 |
4.2.1.
Use-specific instructions for use
4.2.2.
Use-specific risk mitigation measures
4.2.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.2.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.2.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
5.
GENERAL DIRECTIONS FOR USE
(5)
OF THE META SPC 5
5.1.
Instructions for use
5.2.
Risk mitigation measures
5.3.
Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
5.4.
Instructions for safe disposal of the product and its packaging
- 5.5.
Conditions of storage and shelf-life of the product under normal conditions of storage
6.
OTHER INFORMATION
7.
THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5
7.1.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
kodan® wipes pure schülke® classic wipes |
||||
Authorisation number |
EU-0023656-0005 1-5 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
META SPC 6
1.
META SPC 6 ADMINISTRATIVE INFORMATION
1.1.
Meta SPC 6 identifier
Identifier |
meta SPC 6 kodan wipes IPA |
1.2.
Suffix to the authorisation number
Number |
1-6 |
1.3.
Product type(s)
Product type(s) |
PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
2.
META SPC 6 COMPOSITION
2.1.
Qualitative and quantitative information on the composition of the meta SPC 6
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation of the meta SPC 6
Formulation(s) |
Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation |
3.
HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6
Hazard statements |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
Precautionary statements |
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists: Get medical advice. If eye irritation persists: Get medical attention. In case of fire: Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents /container to an approved waste disposal plant. |
4.
AUTHORISED USE(S) OF THE META SPC 6
4.1.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes |
Category(ies) of users |
Industrial Professional General public (non-professional) |
Pack sizes and packaging material |
Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 |
4.1.1.
Use-specific instructions for use
4.1.2.
Use-specific risk mitigation measures
4.1.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.1.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.1.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.2.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria including Mycobacterium tuberculosis Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes |
Category(ies) of users |
Industrial Professional General public (non-professional) |
Pack sizes and packaging material |
Soft pack: 1-200 wipes Packaging material: LDPE/Alu/PET; LDPE/PET; BOPP+CPP Pouch: 10-200 wipes Packaging material: LDPE/PET Tube: 50-200 wipes Packaging material: HDPE closure material is either PP, PE3385 |
4.2.1.
Use-specific instructions for use
4.2.2.
Use-specific risk mitigation measures
4.2.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.2.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.2.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
5.
GENERAL DIRECTIONS FOR USE
(6)
OF THE META SPC 6
5.1.
Instructions for use
5.2.
Risk mitigation measures
5.3.
Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
5.4.
Instructions for safe disposal of the product and its packaging
- 5.5.
Conditions of storage and shelf-life of the product under normal conditions of storage
6.
OTHER INFORMATION
7.
THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6
7.1.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
schülke Hygiene-Tücher SOS Desinfizierende Feuchttücher SOS Hygiene-Tücher kodan® clean comfort wipes schülke clean comfort wipes Hygiene-Tücher Desinfizierende Feuchttücher Desinfektionstücher clean comfort wipes disinfecting wipes |
||||
Authorisation number |
EU-0023656-0006 1-6 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
META SPC 7
1.
META SPC 7 ADMINISTRATIVE INFORMATION
1.1.
Meta SPC 7 identifier
Identifier |
meta SPC 7 AntiLy SD |
1.2.
Suffix to the authorisation number
Number |
1-7 |
1.3.
Product type(s)
Product type(s) |
PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
2.
META SPC 7 COMPOSITION
2.1.
Qualitative and quantitative information on the composition of the meta SPC 7
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation of the meta SPC 7
Formulation(s) |
Any other liquid (AL), ready-to-use |
3.
HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 7
Hazard statements |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
Precautionary statements |
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists: Get medical advice. If eye irritation persists: Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents /container to an approved waste disposal plant. |
4.
AUTHORISED USE(S) OF THE META SPC 7
4.1.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Spraying Product will be sprayed directly on the surface. |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 125-1000 ml packaging material: HDPE Clack cap material: PP; Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel); Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil) |
4.1.1.
Use-specific instructions for use
4.1.2.
Use-specific risk mitigation measures
4.1.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.1.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.1.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.2.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Wiping Product is applied on wipes by pouring, spraying or soaking and the surface is thoroughly wiped with the soaked wipe afterwards (wet-wiping). |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 125-1000 ml packaging material: HDPE Clack cap material: PP Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel); Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil) Canister: 5-30 L packaging material: HDPE closure material: HDPE |
4.2.1.
Use-specific instructions for use
4.2.2.
Use-specific risk mitigation measures
4.2.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.2.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.2.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.3.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Spraying Product will be sprayed directly on the surface. |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 125-1000 ml packaging material: HDPE Clack cap material: PP Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel) Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil) |
4.3.1.
Use-specific instructions for use
4.3.2.
Use-specific risk mitigation measures
4.3.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.3.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.3.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.4.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Wiping Product is applied on wipes by pouring, spraying or soaking and the surface is thoroughly wiped with the soaked wipe afterwards (wet-wiping). |
Application rate(s) and frequency |
Ready-to-use. Do not apply more than 25 ml/m2. |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Bottle: 125-1000 ml packaging material: HDPE Clack cap material: PP Fine mist-sprayer: complex system (PE-LD, PP, PBT, POM, EVA, stainless steel) Spray head: complex system (PP, PE, POM, Synthetic oil, Silicon oil) Canister: 5-30 L packaging material: HDPE closure material: HDPE |
4.4.1.
Use-specific instructions for use
4.4.2.
Use-specific risk mitigation measures
4.4.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.4.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.4.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
5.
GENERAL DIRECTIONS FOR USE
(7)
OF THE META SPC 7
5.1.
Instructions for use
5.2.
Risk mitigation measures
5.3.
Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
5.4.
Instructions for safe disposal of the product and its packaging
- 5.5.
Conditions of storage and shelf-life of the product under normal conditions of storage
6.
OTHER INFORMATION
7.
THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 7
7.1.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
AntiLy 5 |
||||
Authorisation number |
EU-0023656-0007 1-7 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
7.2.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
AntiLy 6 |
||||
Authorisation number |
EU-0023656-0008 1-7 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
META SPC 8
1.
META SPC 8 ADMINISTRATIVE INFORMATION
1.1.
Meta SPC 8 identifier
Identifier |
meta SPC 8 AntiLy SD wipes |
1.2.
Suffix to the authorisation number
Number |
1-8 |
1.3.
Product type(s)
Product type(s) |
PT04 - Food and feed area (Disinfectants) PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
2.
META SPC 8 COMPOSITION
2.1.
Qualitative and quantitative information on the composition of the meta SPC 8
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
|
Min |
Max |
|||||
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
63,1 |
2.2.
Type(s) of formulation of the meta SPC 8
Formulation(s) |
Any other liquid (AL), ready-to-use, wipes impregnated with disinfectant formulation |
3.
HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 8
Hazard statements |
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. |
Precautionary statements |
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep container tightly closed. Ground and bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use non-sparking tools. Take action to prevent static discharges. Avoid breathing vapours. Avoid breathing spray. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or doctor if you feel unwell. If eye irritation persists: Get medical advice. If eye irritation persists: Get medical attention. In case of fire:Use alcohol-resistant foam, carbon dioxide or water mist to extinguish. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents /container to an approved waste disposal plant. |
4.
AUTHORISED USE(S) OF THE META SPC 8
4.1.
Use description
Product type |
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces such as small work surfaces in medical and non-medical areas as well as surfaces in cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Can: 100-150 wipes Packaging: HDPE Closure material: HDPE Pack: 100-150 wipes Packaging: PET/PE |
4.1.1.
Use-specific instructions for use
4.1.2.
Use-specific risk mitigation measures
4.1.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.1.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.1.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
4.2.
Use description
Product type |
PT04 - Food and feed area (Disinfectants) |
Where relevant, an exact description of the authorised use |
- |
Target organism(s) (including development stage) |
Scientific name: Bacteria Common name: - Development stage: - Scientific name: Yeast Common name: - Development stage: - Scientific name: Viruses Common name: - Development stage: - |
Field(s) of use |
Indoor Disinfection of clean non-porous surfaces in kitchens and food industry including cleanrooms (class A/B) |
Application method(s) |
Wiping Product will be wiped directly on the surface. |
Application rate(s) and frequency |
Ready-to-use wipes |
Category(ies) of users |
Industrial Professional |
Pack sizes and packaging material |
Can: 100-150 wipes Packaging: HDPE Closure material: HDPE Pack: 100-150 wipes Packaging: PET/PE |
4.2.1.
Use-specific instructions for use
4.2.2.
Use-specific risk mitigation measures
4.2.3.
Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
4.2.4.
Where specific to the use, the instructions for safe disposal of the product and its packaging
- 4.2.5.
Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
5.
GENERAL DIRECTIONS FOR USE
(8)
OF THE META SPC 8
5.1.
Instructions for use
5.2.
Risk mitigation measures
5.3.
Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
5.4.
Instructions for safe disposal of the product and its packaging
- 5.5.
Conditions of storage and shelf-life of the product under normal conditions of storage
6.
OTHER INFORMATION
7.
THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 8
7.1.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
AntiLy 5 wipes |
||||
Authorisation number |
EU-0023656-0009 1-8 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |
7.2.
Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) |
AntiLy 6 wipes |
||||
Authorisation number |
EU-0023656-0010 1-8 |
||||
Common name |
IUPAC name |
Function |
CAS number |
EC number |
Content (%) |
Propan-2-ol |
|
Active Substance |
67-63-0 |
200-661-7 |
63,1 |