Commission Implementing Decision (EU) 2022/1954 of 12 October 2022 on harmonised ... (32022D1954)
EU - Rechtsakte: 13 Industrial policy and internal market

COMMISSION IMPLEMENTING DECISION (EU) 2022/1954

of 12 October 2022

on harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council

(Text with EEA relevance)

THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (1), and in particular Article 10(6) thereof,
Whereas:
(1) In accordance with Article 14 of Directive 2013/53/EU of the European Parliament and of the Council (2), products which are in conformity with harmonised standards or parts thereof the references of which have been published in the
Official Journal of the European Union
, are presumed to be in conformity with the requirements covered by those standards or parts thereof set out in Article 4(1) of Directive 2013/53/EU and Annex I to that Directive.
(2) By Implementing Decision C(2015) 8736 (3), the Commission made a request to the European Committee for Standardisation (CEN) and the European Committee for Electrotechnical Standardisation (Cenelec) for the drafting and revision of harmonised standards in support of Directive 2013/53/EU addressing the stricter essential requirements set out in Article 4(1) of Directive 2013/53/EU and in Annex I to that Directive in comparison with the repealed Directive 94/25/EC of the European Parliament and of the Council (4).
(3) By Implementing Decision C(2015) 8736 CEN and Cenelec were also requested to revise standards the references of which were published by Commission communication 2018/C 209/05 (5).
(4) On the basis of the request set out in Implementing Decision C(2015) 8736, CEN revised harmonised standard EN ISO 10087:2019 on craft identification and coding system for small craft, the reference of which is included in Annex I to Commission Implementing Decision (EU) 2019/919 (6)
.
This resulted in the adoption of the harmonised standard EN ISO 10087:2022 on craft identification and coding system for small craft.
(5) The Commission together with CEN has assessed whether this harmonised standard complies with the request set out in Implementing Decision C(2015) 8736.
(6) The standard EN ISO 10087:2022 satisfies the requirements which it aims to cover and which are set out in Article 4(1) of Directive 2013/53/EU, as well as in Part A of Annex I to that Directive. It is therefore appropriate to publish the reference of this standard in the
Official Journal of the European Union
.
(7) Standard EN ISO 10087:2022 is to replace standard EN ISO 10087:2019. It is therefore necessary to withdraw the reference of standard EN ISO 10087:2019 from the
Official Journal of the European Union
.
(8) In order to give manufacturers sufficient time to adapt their products to the revised version of harmonised standard EN ISO 10087:2019, it is necessary to defer the withdrawal of the reference of this standard.
(9) In the interests of clarity and rationality, a complete list of references of harmonised standards drafted in support of Directive 2013/53/EU and satisfying the requirements they aim to cover should be published in a single act. The references of harmonised standards drafted in support of Directive 2013/53/EU are currently published by Implementing Decision (EU) 2019/919 and Communication 2018/C 209/05.
(10) Implementing Decision (EU) 2019/919 has been substantially amended several times. In the interests of clarity and rationality, and since further amendment needs to be made to that Implementing Decision, that Implementing Decision should be replaced.
(11) Many of the references of harmonised standards published by Communication 2018/C 209/05 have been withdrawn. Implementing Decision (EU) 2019/919 provides for withdrawal of the remaining references of harmonised standards that are published by that Communication. In the interests of clarity and rationality Communication 2018/C 209/05 should be repealed. In order to give manufacturers sufficient time to adapt their products to the revised versions of the standards concerned, Communication 2018/C 209/05 should continue to apply until the dates of withdrawal of the references of harmonised standards concerned published by that Communication.
Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the
Official Journal of the European Union
. This Decision should therefore enter into force on the date of its publication,
HAS ADOPTED THIS DECISION:

Article 1

The references of harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU, listed in Annex I to this Decision, are hereby published in the
Official Journal of the European Union
.

Article 2

Implementing Decision (EU) 2019/919 is repealed.

Article 3

Communication 2018/C 209/05 is repealed.
However, it shall continue to apply in respect of the references of harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references set out in that Annex.

Article 4

This Decision shall enter into force on the day of its publication in the
Official Journal of the European Union
.
Done at Brussels, 12 October 2022.
For the Commission
The President
Ursula VON DER LEYEN
(1)  
OJ L 316, 14.11.2012, p. 12
.
(2)  Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC (
OJ L 354, 28.12.2013, p. 90
).
(3)  Commission Implementing Decision C(2015) 8736 final of 15 December 2015 on a standardisation request to the European Committee for Standardisation and the European Committee for Electro-technical Standardisation as regards recreational craft and personal watercraft in support of Directive 2013/53/EU of the European Parliament and of the Council of 20 November 2013 on recreational craft and personal watercraft and repealing Directive 94/25/EC.
(4)  Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft (
OJ L 164, 30.6.1994, p. 15
).
(5)  Commission communication in the framework of the implementation of Directive 2013/53/EU of the European Parliament and of the Council on recreational craft and personal watercraft and repealing Directive 94/25/EC (Publication of titles and references of harmonised standards under Union harmonisation legislation) (
OJ C 209, 15.6.2018, p. 137
).
(6)  Commission Implementing Decision (EU) 2019/919 of 4 June 2019 on the harmonised standards for recreational craft and personal watercraft drafted in support of Directive 2013/53/EU of the European Parliament and of the Council (
OJ L 146, 5.6.2019, p. 106
).

ANNEX I

No

Reference of the standard

1.

EN ISO 6185-1:2018

Inflatable boats – Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001)

2.

EN ISO 6185-2:2018

Inflatable boats – Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001)

3.

EN ISO 6185-3:2018

Inflatable boats – Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014)

4.

EN ISO 6185-4:2018

Inflatable boats – Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01)

5.

EN ISO 7840:2021

Small craft – Fire-resistant fuel hoses (ISO 7840:2021)

6.

EN ISO 8099-1:2018

Small craft – Waste systems – Part 1: Waste water retention (ISO 8099-1:2018)

7.

EN ISO 8099-2:2021

Small craft – Waste systems – Part 2: Sewage treatment systems (ISO 8099-2:2020)

8.

EN ISO 8469:2021

Small craft – Non-fire-resistant fuel hoses (ISO 8469:2021)

9.

EN ISO 8665:2017

Small craft – Marine propulsion reciprocating internal combustion engines – Power measurements and declarations (ISO 8665:2006)

10.

EN ISO 8666:2020

Small craft – Principal data (ISO 8666:2020)

EN ISO 8666:2020/A11:2021

11.

EN ISO 8846:2017

Small craft – Electrical devices – Protection against ignition of surrounding flammable gases (ISO 8846:1990)

12.

EN ISO 8847:2021

Small craft – Steering gear – Cable over pulley systems (ISO 8847:2021)

13.

EN ISO 8848:2017

Small craft – Remote steering systems (ISO 8848:1990)

14.

EN ISO 8849:2021

Small craft – Electrically operated bilge pumps (ISO 8849:2020)

15.

EN ISO 9093:2021

Small craft – Seacocks and through-hull fittings (ISO 9093:2020)

16.

EN ISO 9094:2017

Small craft – Fire protection (ISO 9094:2015)

17.

EN ISO 10087:2022

Small craft – Craft identification – Coding system (ISO 10087:2022)

18.

EN ISO 10088:2017

Small craft – Permanently installed fuel systems (ISO 10088:2013)

19.

EN ISO 10133:2017

Small craft – Electrical systems – Extra-low-voltage d.c. installations (ISO 10133:2012)

20.

EN ISO 10239:2017

Small craft – Liquefied petroleum gas (LPG) systems (ISO 10239:2014)

21.

EN ISO 10592:2017

Small craft – Hydraulic steering systems (ISO 10592:1994)

22.

EN ISO 11105:2020

Small craft – Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:2020)

23.

EN ISO 11192:2018

Small craft – Graphical symbols (ISO 11192:2005)

24.

EN ISO 11547:2018

Small craft – Start-in-gear protection (ISO 11547:1994)

25.

EN ISO 11592-1:2016

Small craft – Determination of maximum propulsion power rating using manoeuvring speed – Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016)

26.

EN ISO 11592-2:2021

Small craft – Determination of maximum propulsion power rating using manoeuvring speed – Part 2: Craft with a length of hull between 8 m and 24 m (ISO 11592-2:2021)

27.

EN ISO 11812:2018

Small craft – Watertight cockpits and quick-draining cockpits (ISO 11812:2001)

28.

EN ISO 12215-1:2018

Small craft – Hull construction and scantlings – Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)

29.

EN ISO 12215-2:2018

Small craft – Hull construction and scantlings – Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002)

30.

EN ISO 12215-3:2018

Small craft – Hull construction and scantlings – Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002)

31.

EN ISO 12215-4:2018

Small craft – Hull construction and scantlings – Part 4: Workshop and manufacturing (ISO 12215-4:2002)

32.

EN ISO 12215-5:2019

Small craft – Hull construction and scantlings – Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019)

33.

EN ISO 12215-6:2018

Small craft – Hull construction and scantlings – Part 6: Structural arrangements and details (ISO 12215-6:2008)

34.

EN ISO 12215-8:2018

Small craft – Hull construction and scantlings – Part 8: Rudders (ISO 12215-8:2009, including Cor 1:2010)

35.

EN ISO 12215-9:2018

Small craft – Hull construction and scantlings – Part 9: Sailing craft appendages (ISO 12215-9:2012)

36.

EN ISO 12216:2018

Small craft – Windows, portlights, hatches, deadlights and doors – Strength and watertightness requirements (ISO 12216:2002)

37.

EN ISO 12217-1:2017

Small craft – Stability and buoyancy assessment and categorization – Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015)

38.

EN ISO 12217-2:2017

Small craft – Stability and buoyancy assessment and categorization – Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015)

39.

EN ISO 12217-3:2017

Small craft – Stability and buoyancy assessment and categorization – Part 3: Boats of hull length less than 6 m (ISO 12217-3:2015)

40.

EN ISO 13297:2018

Small craft – Electrical systems – Alternating current installations (ISO 13297:2014)

41.

EN ISO 13590:2018

Small craft – Personal watercraft – Construction and system installation requirements (ISO 13590:2003)

42.

EN ISO 13929:2017

Small craft – Steering gear – Geared link systems (ISO 13929:2001)

43.

EN ISO 14509-1:2018

Small craft – Airborne sound emitted by powered recreational craft – Part 1: Pass-by measurement procedures (ISO 14509-1:2008)

44.

EN ISO 14509-3:2018

Small craft – Airborne sound emitted by powered recreational craft – Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009)

45.

EN ISO 14895:2016

Small craft – Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016)

46.

EN ISO 14945:2021

Small craft – Builder’s plate (ISO 14945:2021)

47.

EN ISO 14946:2021

Small craft – Maximum load capacity (ISO 14946:2021)

48.

EN ISO 15083:2018

Small craft – Bilge-pumping systems (ISO 15083:2003)

49.

EN ISO 15084:2018

Small craft – Anchoring, mooring and towing – Strong points (ISO 15084:2003)

50.

EN ISO 15085:2003

Small craft – Man-overboard prevention and recovery (ISO 15085:2003)

EN ISO 15085:2003/A1:2009

EN ISO 15085:2003/A2:2018

51.

EN ISO 15584:2017

Small craft – Inboard petrol engines – Engine-mounted fuel and electrical components (ISO 15584:2001)

52.

EN 15609:2021

LPG equipment and accessories – LPG propulsion systems for boats, yachts and other watercraft – Installation requirements

53.

EN ISO 16147:2021

Small craft – Inboard diesel engines – Engine-mounted fuel, oil and electrical components (ISO 16147:2020)

54.

EN ISO 16180:2018

Small craft – Navigation lights – Installation, placement and visibility (ISO 16180:2013)

55.

EN ISO 16315:2016

Small craft – Electric propulsion system (ISO 16315:2016)

56.

EN ISO 18854:2015

Small craft – Reciprocating internal combustion engines exhaust emission measurement – Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)

57.

EN ISO 19009:2015

Small craft – Electric navigation lights – Performance of LED lights (ISO 19009:2015)

58.

EN ISO 21487:2018

Small craft – Permanently installed petrol and diesel fuel tanks (ISO 21487:2012, including Amd 1:2014 and Amd 2:2015)

59.

EN ISO 23411:2021

Small craft – Steering wheels (ISO 23411:2020)

60.

EN ISO 25197:2018

Small craft – Electrical/electronic control systems for steering, shift and throttle (ISO 25197:2012, including Amd 1:2014)

61.

EN 60092-507:2015

Electrical installations in ships – Part 507 – Small vessels (IEC 60092-507:2014)

ANNEX II

No

Reference of the standard

Date of withdrawal

1.

EN ISO 7840:2018

Small craft – Fire-resistant fuel hoses (ISO 7840:2013)

27 February 2023

2.

EN ISO 8469:2018

Small craft – Non-fire-resistant fuel hoses (ISO 8469:2013)

27 February 2023

3.

EN ISO 8666:2018

Small craft – Principal data (ISO 8666:2016)

29 December 2023

4.

EN ISO 8847:2017

Small craft – Steering gear – Cable and pulley systems (ISO 8847:2004)

10 September 2023

5.

EN ISO 9093-1:2018

Small craft – Seacocks and through-hull fittings – Part 1: Metallic (ISO 9093-1:1994)

27 February 2023

6.

EN ISO 9093-2:2018

Small craft – Seacocks and through-hull fittings – Part 2: Non-metallic (ISO 9093-2:2002)

27 February 2023

7.

EN ISO 9775:2017

Small craft – Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990)

27 February 2023

8.

EN ISO 10087:2019

Craft identification and coding system for small craft

17 April 2024

9.

EN 15609:2012

LPG equipment and accessories – LPG propulsion systems for boats, yachts and other craft

29 December 2023

10.

EN ISO 15652:2017

Small craft – Remote steering systems for inboard mini jet boats (ISO 15652:2003)

27 February 2023

11.

EN ISO 16147:2017

Small craft – Inboard diesel engines – Engine-mounted fuel and electrical components (ISO 16147:2002, including Amd 1:2013)

27 February 2023

Markierungen
Leseansicht