Commission Implementing Decision (EU) 2023/1586 of 26 July 2023 on harmonised sta... (32023D1586)
EU - Rechtsakte: 13 Industrial policy and internal market

COMMISSION IMPLEMENTING DECISION (EU) 2023/1586

of 26 July 2023

on harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council

THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European Standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/ EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council (1), and in particular Article 10(6) thereof,
Having regard to Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (2), and in particular Article 7(3) thereof,
Whereas:
(1) In accordance with Article 7 of Directive 2006/42/EC machinery manufactured in conformity with a harmonised standard, the reference to which has been published in the
Official Journal of the European Union
, is to be presumed to comply with the essential health and safety requirements covered by such a harmonised standard.
(2) By letter M/396 of 19 December 2006, the Commission made a request to the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (Cenelec) (‘the Request’) for the drafting, the revision and the completion of the work on harmonised standards in support of Directive 2006/42/EC to take account of changes introduced by that Directive in comparison with Directive 98/37/EC of the European Parliament and of the Council (3).
(3) On the basis of the Request, CEN and Cenelec drafted the following new harmonised standards: EN 280-2:2022 on additional safety requirements for load lifting appliances on the extending lifting structure and work platform, EN ISO 8528-10:2022 on measurement of airborne noise with regards to reciprocating internal combustion engine, EN 12453:2017+A1:2021 on requirements and test methods with regards to power operated doors, EN 16517:2021 on safety with regards to mobile yarders for timber logging, EN 17003:2021 on safety requirements with regards of Roller brake testers for vehicles of more than 3,5 tons GVW, EN 17088:2021 on safety with regards to side curtain ventilation systems, EN 17281:2021 on safety requirements with regards to vehicle cleaning equipment, EN 17348:2022 on requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres, EN 17352:2022 on requirements and safety methods with regards to power operated pedestrian entrance control equipment, EN 17624:2022 on the determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air, EN ISO 18063-2:2021 on visibility test methods and their verification with regard of slewing rough-terrain variable-reach trucks, EN ISO 19085-15:2021 on the safety of presses with regards to woodworking machines, EN ISO 19472-2:2022 on traction aid winches, EN ISO 22291:2022 on safety requirements for wetlaid-nonwoven machinery, EN ISO 28927-13:2022 on test methods for evaluation of vibration emission with regards to fastener driving tools, EN IEC 60335-2-41:2021 with EN IEC 60335-2-41:2021/A11:2021 on particular safety requirements for pumps with regards to household and similar electrical appliance, EN IEC 62841-3-5:2022 with EN IEC 62841-3-5:2022/A11:2022 on particular safety requirements for transportable band saws, EN IEC 62841-3-7:2021 with EN IEC 62841-3-7:2021/A11:2021 on particular safety requirements for transportable wall saws, EN IEC 62841-4-5:2021 with EN IEC 62841-4-5:2021/A11:2021 on particular safety requirements for grass shears, as well as EN IEC 62841-4-7:2022 with EN IEC 62841-4-7:2022/A11:2022 on particular safety requirements for pedestrian controlled walk-behind lawn scarifiers and aerators.
(4) Furthermore, on the basis of the Request, CEN and Cenelec revised the following harmonised standards, the references of which are published in the C series of the
Official Journal of the European Union
by means of the Commission Communication 2018/C 092/01 (4), in order to adapt them to technological progress: EN 280:2013+A1:2015, EN 303-5:2021, EN 415-3:1999+A1:2009, EN 474-1:2006+A6:2019, EN 474-2:2006+A1:2008, EN 474-3:2006+A1:2009, EN 474-4:2006+A2:2012, EN 474-5:2006+A3:2013, EN 474-6:2006+A1:2009, EN 474-7:2006+A1:2009, EN 474-8:2006+A1:2009, EN 474-9:2006+A1:2009, EN 474-10:2006+A1:2009, EN 474-11:2006+A1:2008, EN 474-12:2006+A1:2008, EN 500-4:2011, EN 528:2008, EN 619:2002+A1:2010, EN 620:2002+A1:2010, EN 703:2004+A1:2009, EN 710:1997+A1:2010 with EN 710:1997+A1:2010/AC:2012, EN 746-3:1997+A1:2009, EN 1034-4:2005+A1:2009, EN 1807-1:2013, EN ISO 3691-6:2015 with EN ISO 3691-6:2015/AC:2016, EN ISO 4254-1:2015, EN ISO 4254-6:2009 with EN ISO 4254-6:2009/AC:2010, EN ISO 11850:2011 with EN ISO 11850:2011/A1:2016, EN ISO 11680-1:2011, EN ISO 11680-2:2011, EN ISO 11681-1:2011, EN ISO 11681-2:2011 with EN ISO 11681-2:2011/A1:2017, EN 12012-4:2006+A1:2008, EN 12158-1:2000+A1:2010, EN 12331:2003+A2:2010, EN 12355:2003+A1:2010, EN 12418:2000+A1:2009, EN 12750:2013, EN 13001-3-5:2016, EN 13019:2001+A1:2008, EN 13021:2003+A1:2008, EN 13524:2003+A2:2014, EN 13617-1:2012, EN 13732:2013, EN 13862:2001+A1:2009, EN 13870:2015, EN 13885:2005+A1:2010, EN 15163:2008, EN 15967:2011, EN 16228-1:2014, EN 16228-2:2014, EN 16228-3:2014, EN 16228-4:2014, EN 16228-5:2014, EN 16228-6:2014, EN 16228-7:2014, EN ISO 18217:2015, EN ISO 19085-2:2017, EN ISO 19085-3:2017, EN ISO 22867:2011, EN ISO 28881:2013 with EN ISO 28881:2013/AC:2013, EN ISO 28927-1:2009 with EN ISO 28927-1:2009/A1:2017, EN 60335-2-77:2010, EN 60335-2-89:2010 with EN 60335-2-89:2010/A1:2016 and EN 60335-2-89:2010/A2:2017, EN 62841-1:2015 with EN 62841-1:2015/AC:2015, as well as EN 60745-2-3:2011 with EN 60745-2-3:2011/A11:2014 and EN 60745-2-3:2011/A12:2014 and EN 60745-2-3:2011/A13:2015 and EN 60745-2-3:2011/A2:2013.
(5) This resulted in the adoption of the following amending harmonised standards: EN 280-1:2022, EN 303-5:2021+A1:2022, EN 415-3:2021, EN 474-1:2021, EN 474-2:2022, EN 474-3:2022, EN 474-4:2022, EN 474-5:2022, EN 474-6:2022, EN 474-7:2022, EN 474-8:2022, EN 474-9:2022, EN 474-10:2022, EN 474-11:2022, EN 474-12:2022, EN 474-13:2022, EN 528:2021+A1:2022, EN 619:2022, EN 620:2021, EN 703:2021, EN 746-3:2021, EN 1034-4:2021, EN ISO 3691-6:2021, EN ISO 4254-1:2015 with EN ISO 4254-1:2015/A1:2021, EN ISO 4254-6:2020 with EN ISO 4254-6:2020/A11:2021, EN ISO 4254-17:2022, EN ISO 11680-1:2021, EN ISO 11680-2:2021, EN ISO 11681-1:2022, EN ISO 11681-2:2022, EN ISO 11806-1:2022, EN ISO 11806-2:2022, EN ISO 11850:2011 with EN ISO 11850:2011/A1:2016 and EN ISO 11850:2011/A2:2022, EN 12012-4:2019+A1:2021, EN 12158-1:2021, EN 12331:2021, EN 12355:2022, EN 12418:2021, EN 13001-3-5:2016+A1:2021, EN 13617-1:2021, EN 13732:2022, EN 13862:2021, EN 13870:2015+A1:2021, EN 13885:2022, EN 15163-1:2022, EN 15163-2:2022, EN 15967:2022, EN 16228-1:2014+A1:2021, EN 16228-2:2014+A1:2021, EN 16228-3:2014+A1:2021, EN 16228-4:2014+A1:2021, EN 16228-5:2014+A1:2021, EN 16228-6:2014+A1:2021, EN 16228-7:2014+A1:2021, EN 17106-1:2021, EN 17106-2:2021, EN 17106-3-1:2021, EN 17106-3-2:2021, EN 17106-4:2021, EN ISO 19085-2:2021, EN ISO 19085-3:2021, EN ISO 19085-14:2021, EN ISO 19085-16:2021, EN ISO 19085-17:2021, EN ISO 22867:2021, EN ISO 23062:2022, EN ISO 28881:2022, EN ISO 28927-1:2019, EN IEC 60335-2-89:2022 with EN IEC 60335-2-89:2022/A11:2022, EN 62841-1:2015 with EN 62841-1:2015/AC:2015 and EN 62841-1:2015/A11:2022, EN IEC 62841-2-3:2021 with EN IEC 62841-2-3:2021/A11:2021, as well as EN IEC 62841-4-3:2021 with EN IEC 62841-4-3:2021/A11:2021.
(6) In addition, on the basis of the Request, CEN and Cenelec amended the following standards, the references of which are included in Annex I to Commission Implementing Decision (EU) 2019/436 (5): EN 12301:2019, EN 12385-5:2021, EN 16952:2018, EN 62841-2-1:2018 with EN 62841-2-1:2018/A11:2019, EN 62841-3-1:2014 with EN 62841-3-1:2014/AC:2015 and EN 62841-3-1:2014/A11:2017, EN 62841-3-10:2015 with EN 62841-3-10:2015/AC:2016-07 and EN 62841-3-10:2015/A11:2017, EN 62841-3-6:2014 with EN 62841-3-6:2014/AC:2015 and EN 62841-3-6:2014/A11:2017, and EN 62841-4-2:2019.
(7) This resulted in the adoption of the following amending harmonised standards: EN 12301:2019/AC:2021, EN 12385-5:2021 with EN 12385-5:2021/AC:2021, EN 16952:2018+A1:2021, EN 62841-2-1:2018 with EN 62841-2-1:2018/A11:2019 and EN 62841-2-1:2018/A12:2022 and EN 62841-2-1:2018/A1:2022, EN 62841-3-1:2014 with EN 62841-3-1:2014/AC:2015 and EN 62841-3-1:2014/A11:2017 and EN 62841-3-1:2014/A1:2021 and EN 62841-3-1:2014/A12:2021, EN 62841-3-6:2014 with EN 62841-3-6:2014/AC:2015 and EN 62841-3-6:2014/A11:2017 and EN 62841-3-6:2014/A1:2022 and EN 62841-3-6:2014/A12:2022, EN 62841-3-10:2015 with EN 62841-3-10:2015/AC:2016-07 and EN 62841-3-10:2015/A11:2017 and EN 62841-3-10:2015/A1:2022 and EN 62841-3-10:2015/A12:2022, as well as EN 62841-4-2:2019 with EN 62841-4-2:2019/A11:2022 and EN 62841-4-2:2019/A1:2022.
(8) The Commission together with CEN and Cenelec has assessed whether the standards drafted, revised and amended by CEN and Cenelec comply with the Request.
(9) The harmonised standards drafted, revised and amended by CEN and Cenelec on the basis of the Request, except for harmonised standard EN ISO 11850:2011 with EN ISO 11850:2011/A1:2016 and EN ISO 11850:2011/A2:2022, satisfy the safety requirements which they aim to cover and which are set out in Directive 2006/42/EC.
(10) Having examined the standard EN ISO 11850:2011 with EN ISO 11850:2011/A1:2016 and EN ISO 11850:2011/A2:2022 together with the representatives of Member States and stakeholders in the Machinery Expert Group, the Commission concluded that the standard fails to meet the essential health and safety requirements set out in points 1.1.6, 1.5.15 and 1.6.2 of Annex I to Directive 2006/42/EC, namely the requirement concerning accommodating the variability of the operator's physical dimensions, the requirement that parts of the machinery where persons are liable to move about or stand must be designed and constructed in such a way as to prevent persons slipping, tripping or falling on or off these parts, and the requirement that machinery must be designed and constructed in such a way as to allow access in safety to all areas where intervention is necessary during operation, adjustment and maintenance of the machinery. In particular, the standard includes a derogation to allow a first access step height of up to 700 mm instead of 550 mm on wheeled skidders and wheeled feller-bunchers, but it does not address appropriate ergonomic principles and safe access, which in some cases may lead to slipping, tripping or falling of persons.
(11) It is therefore appropriate to publish the references of those standards, with restriction where relevant, in the
Official Journal of the European Union
, together with references of any relevant amending or correcting standards thereto.
(12) The references of harmonised standards drafted in support of Directive 2006/42/EC are currently published in Communication 2018/C 092/01 and Commission Implementing Decision (EU) 2019/436.
(13) In the interests of clarity and rationality, a complete list of references of harmonised standards drafted in support of Directive 2006/42/EC and satisfying the requirements they aim to cover should be published in a single act.
(14) The references of harmonised standards published in Annex I to Implementing Decision (EU) 2019/436, as well as those published in Communication 2018/C 092/01, should be published in a new consolidated Annex to this Decision.
(15) Moreover, Annexes II and IIA to Implementing Decision (EU) 2019/436 list the specific references of harmonised standards that are published with restrictions, whereas such restrictions are not published separately in the Communication 2018/C 092/01. In the interests of clarity and rationality, references of harmonised standards published with restrictions should be published in a new consolidated Annex to this Decision. Any references in Annexes II and IIA that have exhausted their effects should be omitted.
(16) The references of harmonised standards listed in Annex III to Implementing Decision (EU) 2019/436, as well as those in the fifth column of the Communication 2018/C 092/01, have been withdrawn from the
Official Journal of the European Union
as from the dates set out in the respective tables.
(17) As the result of the work by CEN and Cenelec on the basis of the Request, several harmonised standards published in the C series of the
Official Journal of the European Union
have been replaced, revised or amended, as is also the case for those published in Annex I to Implementing Decision (EU) 2019/436. It is therefore necessary to also withdraw the references of those standards from the
Official Journal of the European Union
and set the dates of withdrawal.
(18) In the interests of clarity and rationality, references of harmonised standards that have been withdrawn should be published in a separate new consolidated Annex to this Decision. Any references with withdrawal dates before the entry into force of this Decision are no longer relevant and should be omitted.
(19) In order to give manufacturers sufficient time to prepare for the application of the new standards, revised standards or amendments to standards, it is necessary to defer the withdrawal of the references of those harmonised standards, as appropriate.
(20) Many of the references of harmonised standards published by Communication 2018/C 092/01 have already been withdrawn by Implementing Decision (EU) 2019/436.
(21) In the interests of clarity and rationality, both Communication 2018/C 092/01 and Implementing Decision (EU) 2019/436 should be repealed. In order to give manufacturers sufficient time to adapt their products to the revised versions of the standards concerned, Communication 2018/C 092/01 and Implementing Decision (EU) 2019/436 should continue to apply to the relevant standards for a transitional period.
(22) Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the
Official Journal of the European Union
. This Decision should therefore enter into force on the date of its publication,
HAS ADOPTED THIS DECISION:

Article 1

The references of harmonised standards for machinery drafted in support of Directive 2006/42/EC listed in Annex I of this Decision are hereby published in the
Official Journal of the European Union
. The references listed in rows 121, 266, 343, 405 and 495 of that Annex are published with restrictions.

Article 2

Communication 2018/C 092/01 is repealed.
However, it shall continue to apply to the references of harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references set out in that Annex.

Article 3

Implementing Decision (EU) 2019/436 is repealed.
However, it shall continue to apply to the references of harmonised standards listed in Annex III to this Decision until the dates of withdrawal of those references set out in that Annex.

Article 4

This Decision shall enter into force on the day of its publication in the
Official Journal of the European Union
.
Done at Brussels, 26 July 2023.
For the Commission
The President
Ursula VON DER LEYEN
(1)  
OJ L 316, 14.11.2012, p. 12
.
(2)  
OJ L 157, 9.6.2006, p. 24
.
(3)  Directive 98/37/EC of the European Parliament and of the Council of 22 June 1998 on the approximation of the laws of the Member States relating to machinery (
OJ L 207, 23.7.1998, p. 1
).
(4)  Commission Communication 2018/C 092/01 in the framework of the implementation of the Directive 2006/42/EC of the European Parliament and of the Council on machinery, and amending Directive 95/16/EC (
OJ C 92, 9.3.2018, p. 1
).
(5)  Commission Implementing Decision (EU) 2019/436 of 18 March 2019 on the harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council (
OJ L 75, 19.3.2019, p. 108
).

ANNEX I

PART ONE

A-TYPE STANDARDS

1.   Explanatory note.

A-type standards specify basic concepts, terminology and design principles applicable to all categories of machinery. Application of such standards alone, although providing an essential framework for the correct application of the Machinery Directive, is not sufficient to ensure conformity with the relevant essential health and safety requirements of the Directive and therefore does not give a full presumption of conformity.

2.   List of references of standards.

1.

EN 1127-2:2014

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining

2.

EN ISO 12100:2010

Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)

PART TWO

B-TYPE STANDARDS

1.   Explanatory note.

B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer's risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards.

2.   List of references of standards.

1.

EN 547-1:1996+A1:2008

Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery

2.

EN 547-2:1996+A1:2008

Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings

3.

EN 547-3:1996+A1:2008

Safety of machinery - Human body measurements - Part 3: Anthropometric data

4.

EN 614-1:2006+A1:2009

Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles

5.

EN 614-2:2000+A1:2008

Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks

6.

EN 842:1996+A1:2008

Safety of machinery - Visual danger signals - General requirements, design and testing

7.

EN 894-1:1997+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

8.

EN 894-2:1997+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays

9.

EN 894-3:2000+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators

10.

EN 894-4:2010

Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators

11.

EN 981:1996+A1:2008

Safety of machinery - System of auditory and visual danger and information signals

12.

EN 1005-1:2001+A1:2008

Safety of machinery - Human physical performance - Part 1: Terms and definitions

13.

EN 1005-2:2003+A1:2008

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery

14.

EN 1005-3:2002+A1:2008

Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation

15.

EN 1005-4:2005+A1:2008

Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery

16.

EN 1032:2003+A1:2008

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value

17.

EN 1093-1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods

18.

EN 1093-2:2006+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant

19.

EN 1093-3:2006+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant

20.

EN 1093-4:1996+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method

21.

EN 1093-6:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

22.

EN 1093-7:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet

23.

EN 1093-8:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method

24.

EN 1093-9:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method

25.

EN 1093-11:2001+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index

26.

EN 1127-1:2019

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

27.

EN 1299:1997+A1:2008

Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation

28.

EN 1837:2020

Safety of machinery - Integral lighting of machines

29.

EN ISO 3741:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)

30.

EN ISO 3743-1:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)

31.

EN ISO 3743-2:2019

Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018)

32.

EN ISO 3744:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)

33.

EN ISO 3745:2012

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)

EN ISO 3745:2012/A1:2017

34.

EN ISO 3746:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

35.

EN ISO 3747:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)

36.

EN ISO 4413:2010

Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)

37.

EN ISO 4414:2010

Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)

38.

EN ISO 4871:2009

Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)

39.

EN ISO 5136:2009

Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)

40.

EN ISO 7235:2009

Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)

41.

EN ISO 7731:2008

Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)

42.

EN ISO 9614-1:2009

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)

43.

EN ISO 9614-3:2009

Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

44.

EN ISO 10326-1:2016

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02)

45.

EN ISO 11161:2007

Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007)

EN ISO 11161:2007/A1:2010

46.

EN ISO 11201:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)

47.

EN ISO 11202:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)

EN ISO 11202:2010/A1:2021

48.

EN ISO 11203:2009

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

EN ISO 11203:2009/A1:2020

49.

EN ISO 11204:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)

50.

EN ISO 11205:2009

Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)

51.

EN ISO 11546-1:2009

Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)

52.

EN ISO 11546-2:2009

Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)

53.

EN ISO 11553-1:2020

Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020)

EN ISO 11553-1:2020/A11:2020

54.

EN ISO 11688-1:2009

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

55.

EN ISO 11691:2009

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)

56.

EN ISO 11957:2009

Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)

57.

EN 12198-1:2000+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles

58.

EN 12198-2:2002+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure

59.

EN 12198-3:2002+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening

60.

EN 12254:2010

Screens for laser working places - Safety requirements and testing

EN 12254:2010/AC:2011

61.

EN 12786:2013

Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards

62.

EN 13490:2001+A1:2008

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration

63.

EN ISO 13732-1:2008

Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)

64.

EN ISO 13732-3:2008

Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)

65.

EN ISO 13753:2008

Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system (ISO 13753:1998)

66.

EN ISO 13849-1:2015

Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)

67.

EN ISO 13849-2:2012

Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012)

68.

EN ISO 13850:2015

Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)

69.

EN ISO 13851:2019

Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019)

70.

EN ISO 13854:2019

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017)

71.

EN ISO 13855:2010

Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)

72.

EN ISO 13856-1:2013

Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors (ISO 13856-1:2013)

73.

EN ISO 13856-2:2013

Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-2:2013)

74.

EN ISO 13856-3:2013

Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices (ISO 13856-3:2013)

75.

EN ISO 13857:2019

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019)

76.

EN ISO 14118:2018

Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)

77.

EN ISO 14119:2013

Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013)

78.

EN ISO 14120:2015

Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)

79.

EN ISO 14122-1:2016

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)

80.

EN ISO 14122-2:2016

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)

81.

EN ISO 14122-3:2016

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)

82.

EN ISO 14122-4:2016

Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)

83.

EN ISO 14123-1:2015

Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers (ISO 14123-1:2015)

84.

EN ISO 14123-2:2015

Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015)

85.

EN ISO 14159:2008

Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)

86.

EN ISO 14738:2008

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)

87.

EN ISO 15536-1:2008

Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)

88.

EN 15967:2022

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours

89.

EN 16590-1:2014

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2010 modified)

90.

EN 16590-2:2014

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified)

91.

EN 17624:2022

Determination of explosion limits of gases and vapours at elevated pressures, elevated temperatures or with oxidizers other than air

92.

EN ISO 18497:2018

Agricultural machinery and tractors - Safety of highly automated agricultural machines - Principles for design (ISO 18497:2018)

93.

EN ISO 19353:2019

Safety of machinery - Fire prevention and fire protection (ISO 19353:2019)

94.

EN ISO 20607:2019

Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019)

95.

EN ISO 20643:2008

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005)

EN ISO 20643:2008/A1:2012

96.

EN 60204-1:2018

Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:2016, modified)

97.

EN IEC 60204-11:2019

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV (IEC 60204-11:2018)

98.

EN 60204-32:2008

Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC 60204-32:2008)

99.

EN 60204-33:2011

Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment (IEC 60204-33:2009, modified)

100.

EN 61310-1:2008

Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007)

101.

EN 61310-2:2008

Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking (IEC 61310-2:2007)

102.

EN 61310-3:2008

Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators (IEC 61310-3:2007)

103.

EN 61800-5-2:2007

Adjustable speed electrical power drive systems - Part 5-2: Safety requirements – Functional (IEC 61800-5-2:2007)

104.

EN IEC 62061:2021

Safety of machinery - Functional safety of safety-related control systems (IEC 62061:2021)

105.

EN 62745:2017

Safety of machinery - Requirements for cableless control systems of machinery (IEC 62745:2017)

EN 62745:2017/A11:2020

PART THREE

C-TYPE STANDARDS

1.   Explanatory note.

C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.

2.   List of references of standards.

1.

EN 81-3:2000+A1:2008

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts

EN 81-3:2000+A1:2008/AC:2009

2.

EN 81-31:2010

Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts

3.

EN 81-40:2020

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility

4.

EN 81-41:2010

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

5.

EN 81-43:2009

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes

6.

EN 115-1:2017

Safety of escalators and moving walks - Part 1: Construction and installation

7.

EN 267:2009+A1:2011

Automatic forced draught burners for liquid fuels

8.

EN 280-1:2022

Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Construction - Safety - Examinations and tests

9.

EN 280-2:2022

Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting appliances on the extending lifting structure and work platform

10.

EN 289:2014

Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements

11.

EN 303-5:2021+A1:2022

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

12.

EN 378-2:2016

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

13.

EN 415-1:2014

Safety of packaging machines - Part 1: Terminology and classification of packaging machines and associated equipment

14.

EN 415-3:2021

Safety of packaging machines - Part 3: Form, fill and seal machines; fill and seal machines

15.

EN 415-5:2006+A1:2009

Safety of packaging machines - Part 5: Wrapping machines

16.

EN 415-6:2013

Safety of packaging machines - Part 6: Pallet wrapping machines

17.

EN 415-7:2006+A1:2008

Safety of packaging machines - Part 7: Group and secondary packaging machines

18.

EN 415-8:2008

Safety of packaging machines - Part 8: Strapping machines

19.

EN 415-9:2009

Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3

20.

EN 415-10:2014

Safety of packaging machines - Part 10: General Requirements

21.

EN 422:2009

Plastics and rubber machines - Blow moulding machines - Safety requirements

22.

EN 453:2014

Food processing machinery - Dough mixers - Safety and hygiene requirements

23.

EN 454:2014

Food processing machinery - Planetary mixers - Safety and hygiene requirements

24.

EN 474-1:2022

Earth-moving machinery - Safety - Part 1: General requirements

25.

EN 474-2:2022

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

26.

EN 474-3:2022

Earth-moving machinery - Safety - Part 3: Requirements for loaders

EN 474-3:2022/AC:2022

27.

EN 474-4:2022

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

28.

EN 474-5:2022

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

EN 474-5:2022/AC:2022

29.

EN 474-6:2022

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

30.

EN 474-7:2022

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

31.

EN 474-8:2022

Earth-moving machinery - Safety - Part 8: Requirements for graders

32.

EN 474-9:2022

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

33.

EN 474-10:2022

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

34.

EN 474-11:2022

Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors

35.

EN 474-12:2022

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

36.

EN 474-13:2022

Earth-moving machinery - Safety - Part 13: Requirements for rollers

37.

EN 500-1:2006+A1:2009

Mobile road construction machinery - Safety - Part 1: Common requirements

38.

EN 500-2:2006+A1:2008

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

39.

EN 500-3:2006+A1:2008

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines

40.

EN 500-6:2006+A1:2008

Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-finishers

41.

EN 528:2021+A1:2022

Rail dependent storage and retrieval equipment - Safety requirements for S/R machines

42.

EN 536:2015

Road construction machines - Mixing plants for road construction materials - Safety requirements

43.

EN 609-1:2017

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

44.

EN 609-2:1999+A1:2009

Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters

45.

EN 617:2001+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers

46.

EN 618:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors

47.

EN 619:2022

Continuous handling equipment and systems - Safety requirements for equipment for mechanical handling of unit loads

48.

EN 620:2021

Continuous handling equipment and systems - Safety requirements for fixed belt conveyors for bulk materials

49.

EN 676:2003+A2:2008

Automatic forced draught burners for gaseous fuels

EN 676:2003+A2:2008/AC:2008

50.

EN 690:2013

Agricultural machinery - Manure spreaders - Safety

51.

EN 703:2021

Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines

52.

EN 706:1996+A1:2009

Agricultural machinery - Vine shoot tipping machines - Safety

53.

EN 707:2018

Agricultural machinery - Slurry tankers - Safety

54.

EN 709:1997+A4:2009

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety

EN 709:1997+A4:2009/AC:2012

55.

EN 741:2000+A1:2010

Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials

56.

EN 746-1:1997+A1:2009

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment

57.

EN 746-2:2010

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems

58.

EN 746-3:2021

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

59.

EN 809:1998+A1:2009

Pumps and pump units for liquids - Common safety requirements

EN 809:1998+A1:2009/AC:2010

60.

EN 818-1:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

61.

EN 818-2:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

62.

EN 818-3:1999+A1:2008

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

63.

EN 818-4:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

64.

EN 818-5:1999+A1:2008

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

65.

EN 818-6:2000+A1:2008

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer

66.

EN 818-7:2002+A1:2008

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

67.

EN 848-2:2007+A2:2012

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines

68.

EN 869:2006+A1:2009

Safety of machinery - Safety requirements for pressure metal diecasting units

69.

EN 908:1999+A1:2009

Agricultural and forestry machinery - Reel machines for irrigation - Safety

70.

EN 909:1998+A1:2009

Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety

71.

EN 930:1997+A2:2009

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements

72.

EN 931:1997+A2:2009

Footwear manufacturing machines - Lasting machines - Safety requirements

73.

EN 957-6:2010+A1:2014

Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods

74.

EN 972:1998+A1:2010

Tannery machines - Reciprocating roller machines - Safety requirements

EN 972:1998+A1:2010/AC:2011

75.

EN 1010-1:2004+A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

76.

EN 1010-2:2006+A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

77.

EN 1010-3:2002+A1:2009

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines

78.

EN 1010-4:2004+A1:2009

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

79.

EN 1012-1:2010

Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors

80.

EN 1012-2:1996+A1:2009

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

81.

EN 1012-3:2013

Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors

82.

EN 1028-1:2002+A1:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements

83.

EN 1028-2:2002+A1:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements

84.

EN 1034-1:2000+A1:2010

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

85.

EN 1034-2:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums

86.

EN 1034-3:2011

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders

87.

EN 1034-4:2021

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities

88.

EN 1034-5:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters

89.

EN 1034-6:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender

90.

EN 1034-7:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests

91.

EN 1034-8:2012

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants

92.

EN 1034-13:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units

93.

EN 1034-14:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter

94.

EN 1034-16:2012

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines

95.

EN 1034-17:2012

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines

96.

EN 1034-21:2012

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines

97.

EN 1034-22:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders

98.

EN 1034-26:2012

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines

99.

EN 1034-27:2012

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems

100.

EN 1114-1:2011

Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders

101.

EN 1114-3:2019

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

102.

EN 1175:2020

Safety of industrial trucks - Electrical/electronic requirements

103.

EN 1218-1:1999+A1:2009

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table

104.

EN 1218-2:2004+A1:2009

Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains

105.

EN 1218-3:2001+A1:2009

Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers

106.

EN 1218-5:2004+A1:2009

Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain

107.

EN 1247:2004+A1:2010

Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines

108.

EN 1248:2001+A1:2009

Foundry machinery - Safety requirements for abrasive blasting equipment

109.

EN 1265:1999+A1:2008

Safety of machinery - Noise test code for foundry machines and equipment

110.

EN 1374:2000+A1:2010

Agricultural machinery - Silos stationary unloaders for round silos - Safety

111.

EN 1398:2009

Dock levellers - Safety requirements

112.

EN 1417:2014

Plastics and rubber machines - Two-roll mills - Safety requirements

113.

EN 1459-1:2017

Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks

114.

EN 1459-2:2015+A1:2018

Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-reach trucks

115.

EN 1459-5:2020

Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface

116.

EN 1492-1:2000+A1:2008

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

117.

EN 1492-2:2000+A1:2008

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use

118.

EN 1492-4:2004+A1:2008

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

119.

EN 1493:2010

Vehicle lifts

120.

EN 1494:2000+A1:2008

Mobile or movable jacks and associated lifting equipment

121.

EN 1495:1997+A2:2009

Lifting platforms - Mast climbing work platforms

EN 1495:1997+A2:2009/AC:2010

Restriction: This publication does not concern paragraph 5.3.2.4, the last subparagraph of 7.1.2.12, table 8 and figure 9 of standard EN 1495:1997, in respect of which it grants no presumption of conformity to the provisions of Directive 2006/42/EC.

122.

EN 1501-1:2021

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

123.

EN 1501-2:2021

Refuse collection vehicles - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

124.

EN 1501-3:2021

Refuse collection vehicles - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

125.

EN 1501-4:2007

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 4: Noise test code for refuse collection vehicles

126.

EN 1501-5:2021

Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles

127.

EN 1526:1997+A1:2008

Safety of industrial trucks - Additional requirements for automated functions on trucks

128.

EN 1539:2015

Dryers and ovens, in which flammable substances are released - Safety requirements

129.

EN 1547:2001+A1:2009

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment

130.

EN 1550:1997+A1:2008

Machine-tools safety - Safety requirements for the design and construction of work holding chucks

131.

EN 1554:2012

Conveyor belts - Drum friction testing

132.

EN 1570-1:2011+A1:2014

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings

133.

EN 1570-2:2016

Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed landings of a building, for lifting goods with a vertical travel speed not exceeding 0,15 m/s

134.

EN 1612:2019

Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements

135.

EN 1672-2:2005+A1:2009

Food processing machinery - Basic concepts - Part 2: Hygiene requirements

136.

EN 1673:2000+A1:2009

Food processing machinery - Rotary rack ovens - Safety and hygiene requirements

137.

EN 1674:2015

Food processing machinery - Dough sheeters - Safety and hygiene requirements

138.

EN 1677-1:2000+A1:2008

Components for slings - Safety - Part 1: Forged steel components, Grade 8

139.

EN 1677-2:2000+A1:2008

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8

140.

EN 1677-3:2001+A1:2008

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8

141.

EN 1677-4:2000+A1:2008

Components for slings - Safety - Part 4: Links, Grade 8

142.

EN 1677-5:2001+A1:2008

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4

143.

EN 1677-6:2001+A1:2008

Components for slings - Safety - Part 6: Links - Grade 4

144.

EN 1678:1998+A1:2010

Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements

145.

EN 1679-1:1998+A1:2011

Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines

146.

EN 1756-1:2021

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods

147.

EN 1756-2:2004+A1:2009

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers

148.

EN 1777:2010

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing

149.

EN 1804-1:2020

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements

150.

EN 1804-2:2020

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams

151.

EN 1804-3:2020

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems

152.

EN 1807-2:2013

Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines

153.

EN 1808:2015

Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests

154.

EN 1829-1:2021

High-pressure water jet machines - Safety requirements - Part 1: Machines

155.

EN 1829-2:2008

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors

EN 1829-2:2008/AC:2011

156.

EN 1845:2007

Footwear manufacturing machines - Footwear moulding machines - Safety requirements

157.

EN 1846-2:2009+A1:2013

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance

158.

EN 1846-3:2013

Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance

159.

EN 1853:2017

Agricultural machinery - Trailers - Safety

160.

EN 1870-3:2001+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches

161.

EN 1870-5:2002+A2:2012

Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines

162.

EN 1870-6:2017

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood

163.

EN 1870-7:2012

Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading

164.

EN 1870-8:2012

Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading

165.

EN 1870-9:2012

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading

166.

EN 1870-10:2013

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

167.

EN 1870-11:2013

Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws)

168.

EN 1870-12:2013

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

169.

EN 1870-15:2012

Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading

170.

EN 1870-16:2012

Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting

171.

EN 1870-17:2012+A1:2015

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)

172.

EN 1889-2:2003+A1:2009

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives

173.

EN 1915-1:2013

Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements

174.

EN 1915-2:2001+A1:2009

Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods

175.

EN 1915-3:2004+A1:2009

Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction

176.

EN 1915-4:2004+A1:2009

Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction

177.

EN 1953:2013

Atomising and spraying equipment for coating materials - Safety requirements

178.

EN 1974:2020

Food processing machinery - Slicing machines - Safety and hygiene requirements

179.

EN ISO 2151:2008

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2) (ISO 2151:2004)

180.

EN ISO 2860:2008

Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)

181.

EN ISO 2867:2011

Earth-moving machinery - Access systems (ISO 2867:2011)

182.

EN ISO 3164:2013

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications for deflection-limiting volume (ISO 3164:2013)

183.

EN ISO 3266:2010

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)

EN ISO 3266:2010/A1:2015

184.

EN ISO 3411:2007

Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)

185.

EN ISO 3449:2008

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

186.

EN ISO 3450:2011

Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requirements and test procedures for brake systems (ISO 3450:2011)

187.

EN ISO 3457:2008

Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)

188.

EN ISO 3471:2008

Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)

189.

EN ISO 3691-1:2015

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013)

EN ISO 3691-1:2015/AC:2016

EN ISO 3691-1:2015/A1:2020

190.

EN ISO 3691-5:2015

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)

EN ISO 3691-5:2015/A1:2020

191.

EN ISO 3691-6:2021

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2021)

192.

EN ISO 4254-1:2015

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

EN ISO 4254-1:2015/A1:2021

193.

EN ISO 4254-5:2018

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018)

194.

EN ISO 4254-6:2020

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)

EN ISO 4254-6:2020/A11:2021

195.

EN ISO 4254-7:2017

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017)

196.

EN ISO 4254-8:2018

Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)

197.

EN ISO 4254-9:2018

Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)

198.

EN ISO 4254-10:2009

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

EN ISO 4254-10:2009/AC:2010

199.

EN ISO 4254-11:2010

Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)

EN ISO 4254-11:2010/A1:2020

200.

EN ISO 4254-12:2012

Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012)

EN ISO 4254-12:2012/A1:2017

201.

EN ISO 4254-14:2016

Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)

202.

EN ISO 4254-17:2022

Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022)

203.

EN ISO 5010:2019

Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)

204.

EN ISO 5395-1:2013

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013)

EN ISO 5395-1:2013/A1:2018

205.

EN ISO 5395-2:2013

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: Pedestrian-controlled lawnmowers (ISO 5395-2:2013)

EN ISO 5395-2:2013/A1:2016

EN ISO 5395-2:2013/A2:2017

206.

EN ISO 5395-3:2013

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013)

EN ISO 5395-3:2013/A1:2017

EN ISO 5395-3:2013/A2:2018

207.

EN ISO 5674:2009

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01)

208.

EN ISO 6682:2008

Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)

209.

EN ISO 6683:2008

Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)

210.

EN ISO 7096:2020

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)

211.

EN ISO 8230-1:2008

Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008)

212.

EN ISO 8230-2:2008

Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)

213.

EN ISO 8230-3:2008

Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)

214.

EN ISO 8528-10:2022

Reciprocating internal combustion engine driven alternating current generating sets - Part 10: Measurement of airborne noise (ISO 8528-10:2022)

215.

EN ISO 8528-13:2016

Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)

216.

EN ISO 9902-1:2001

Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)

EN ISO 9902-1:2001/A1:2009

EN ISO 9902-1:2001/A2:2014

217.

EN ISO 9902-2:2001

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)

EN ISO 9902-2:2001/A1:2009

EN ISO 9902-2:2001/A2:2014

218.

EN ISO 9902-3:2001

Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)

EN ISO 9902-3:2001/A1:2009

EN ISO 9902-3:2001/A2:2014

219.

EN ISO 9902-4:2001

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)

EN ISO 9902-4:2001/A1:2009

EN ISO 9902-4:2001/A2:2014

220.

EN ISO 9902-5:2001

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (ISO 9902-5:2001)

EN ISO 9902-5:2001/A1:2009

EN ISO 9902-5:2001/A2:2014

221.

EN ISO 9902-6:2001

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2001)

EN ISO 9902-6:2001/A1:2009

EN ISO 9902-6:2001/A2:2014

222.

EN ISO 9902-7:2001

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)

EN ISO 9902-7:2001/A1:2009

EN ISO 9902-7:2001/A2:2014

223.

EN ISO 10218-1:2011

Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)

224.

EN ISO 10218-2:2011

Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot systems and integration (ISO 10218-2:2011)

225.

EN ISO 10472-1:2008

Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)

226.

EN ISO 10472-2:2008

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)

227.

EN ISO 10472-3:2008

Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997)

228.

EN ISO 10472-4:2008

Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997)

229.

EN ISO 10472-5:2008

Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997)

230.

EN ISO 10472-6:2008

Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997)

231.

EN ISO 10517:2019

Powered hand-held hedge trimmers - Safety (ISO 10517:2019)

232.

EN ISO 10821:2005

Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005)

EN ISO 10821:2005/A1:2009

233.

EN ISO 11102-1:2009

Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)

234.

EN ISO 11102-2:2009

Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)

235.

EN ISO 11111-1:2016

Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)

236.

EN ISO 11111-2:2005

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005)

EN ISO 11111-2:2005/A1:2009

EN ISO 11111-2:2005/A2:2016

237.

EN ISO 11111-3:2005

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)

EN ISO 11111-3:2005/A1:2009

EN ISO 11111-3:2005/A2:2016

238.

EN ISO 11111-4:2005

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005)

EN ISO 11111-4:2005/A1:2009

EN ISO 11111-4:2005/A2:2016

239.

EN ISO 11111-5:2005

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005)

EN ISO 11111-5:2005/A1:2009

EN ISO 11111-5:2005/A2:2016

240.

EN ISO 11111-6:2005

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005)

EN ISO 11111-6:2005/A1:2009

EN ISO 11111-6:2005/A2:2016

241.

EN ISO 11111-7:2005

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005)

EN ISO 11111-7:2005/A1:2009

EN ISO 11111-7:2005/A2:2016

242.

EN ISO 11145:2016

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016)

243.

EN ISO 11148-1:2011

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011)

244.

EN ISO 11148-2:2011

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO/FDIS 11148-2:2011)

245.

EN ISO 11148-3:2012

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012)

246.

EN ISO 11148-4:2012

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)

247.

EN ISO 11148-5:2011

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011)

248.

EN ISO 11148-6:2012

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)

249.

EN ISO 11148-7:2012

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012)

250.

EN ISO 11148-8:2011

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)

251.

EN ISO 11148-9:2011

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011)

252.

EN ISO 11148-10:2011

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011)

253.

EN ISO 11148-11:2011

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011)

254.

EN ISO 11148-12:2012

Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)

255.

EN ISO 11148-13:2018

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)

256.

EN ISO 11252:2013

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)

257.

EN ISO 11553-2:2008

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007)

258.

EN ISO 11553-3:2013

Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) (ISO 11553-3:2013)

259.

EN ISO 11554:2017

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017)

260.

EN ISO 11680-1:2021

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021)

261.

EN ISO 11680-2:2021

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021)

262.

EN ISO 11681-1:2022

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2022)

263.

EN ISO 11681-2:2022

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2022)

264.

EN ISO 11806-1:2022

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2022)

265.

EN ISO 11806-2:2022

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022)

266.

EN ISO 11850:2011

Machinery for forestry - General safety requirements (ISO 11850:2011)

EN ISO 11850:2011/A1:2016

EN ISO 11850:2011/A2:2022

Restriction: With regard to paragraph 4.4 a), first paragraph, first indentation, as well as reference to standard EN ISO 2867:2011, table 6 to paragraphs 8 and 9, maximum dimension for ‘A’ and note a) maximum first step height dimension, this publication does not confer a presumption of conformity to the essential health and safety requirements 1.1.6., 1.5.15. and 1.6.2. of Annex I to Directive 2006/42/EC.

267.

EN 12001:2012

Conveying, spraying and placing machines for concrete and mortar - Safety requirements

268.

EN 12012-1:2018

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders

269.

EN 12012-4:2019+A1:2021

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

270.

EN 12013:2018

Plastics and rubber machines - Internal mixers - Safety requirements

271.

EN 12016:2013

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

272.

EN 12041:2014

Food processing machinery - Moulders - Safety and hygiene requirements

273.

EN 12042:2014

Food processing machinery - Automatic dough dividers - Safety and hygiene requirements

274.

EN 12043:2014

Food processing machinery - Intermediate provers - Safety and hygiene requirements

275.

EN 12044:2005+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements

276.

EN 12053:2001+A1:2008

Safety of industrial trucks - Test methods for measuring noise emissions

277.

EN 12077-2:1998+A1:2008

Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices

278.

EN 12110:2014

Tunnelling machines - Air locks - Safety requirements

279.

EN 12111:2014

Tunnelling machines - Road headers and continuous miners - Safety requirements

280.

EN 12158-1:2021

Builders’ hoists for goods - Part 1: Hoists with accessible platforms

281.

EN 12158-2:2000+A1:2010

Builders’ hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices

282.

EN 12159:2012

Builders hoists for persons and materials with vertically guided cages

283.

EN 12162:2001+A1:2009

Liquid pumps - Safety requirements - Procedure for hydrostatic testing

284.

EN 12203:2003+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

285.

EN 12267:2003+A1:2010

Food processing machinery - Circular saw machines - Safety and hygiene requirements

286.

EN 12268:2014

Food processing machinery - Band saw machines - Safety and hygiene requirements

287.

EN 12301:2019

Plastics and rubber machines - Calenders - Safety requirements

EN 12301:2019/AC:2021

288.

EN 12312-1:2013

Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs

289.

EN 12312-2:2014

Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles

290.

EN 12312-3:2017+A1:2020

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

291.

EN 12312-4:2014

Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bridges

292.

EN 12312-5:2021

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment

293.

EN 12312-6:2017

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment

294.

EN 12312-7:2020

Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment

295.

EN 12312-8:2018

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service stairs and platforms

296.

EN 12312-9:2013

Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loaders

297.

EN 12312-10:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet transfer transporters

298.

EN 12312-12:2017

Aircraft ground support equipment - Specific requirements - Part 12: Potable water service equipment

299.

EN 12312-13:2017

Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equipment

300.

EN 12312-14:2014

Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitated passenger boarding vehicles

301.

EN 12312-15:2006+A1:2009

Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors

302.

EN 12312-16:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment

303.

EN 12312-17:2004+A1:2009

Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equipment

304.

EN 12312-18:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units

305.

EN 12312-19:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle jacks and hydraulic tail stanchions

306.

EN 12312-20:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units

307.

EN 12321:2003+A1:2009

Underground mining machinery - Specification for the safety requirements of armoured face conveyors

308.

EN 12331:2021

Food processing machinery - Mincing machines - Safety and hygiene requirements

309.

EN 12348:2000+A1:2009

Core drilling machines on stand - Safety

310.

EN 12355:2022

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements

311.

EN 12385-1:2002+A1:2008

Steel wire ropes - Safety - Part 1: General requirements

312.

EN 12385-2:2002+A1:2008

Steel wire ropes - Safety - Part 2: Definitions, designation and classification

313.

EN 12385-3:2004+A1:2008

Steel wire ropes - Safety - Part 3: Information for use and maintenance

314.

EN 12385-4:2002+A1:2008

Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications

315.

EN 12385-5:2021

Steel wire ropes - Safety - Part 5: Stranded ropes for lifts

EN 12385-5:2021/AC:2021

316.

EN 12385-10:2003+A1:2008

Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications

317.

EN 12387:2005+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

318.

EN 12409:2008+A1:2011

Plastics and rubber machines - Thermoforming machines - Safety requirements

319.

EN 12417:2001+A2:2009

Machine tools - Safety - Machining centres

EN 12417:2001+A2:2009/AC:2010

320.

EN 12418:2021

Masonry and stone cutting-off machines for job site - Safety

321.

EN 12453:2017+A1:2021

Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods

322.

EN 12463:2004+A1:2011

Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements

323.

EN 12505:2000+A1:2009

Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements

324.

EN 12525:2000+A2:2010

Agricultural machinery - Front loaders - Safety

325.

EN 12545:2000+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements

326.

EN 12547:2014

Centrifuges - Common safety requirements

327.

EN 12549:1999+A1:2008

Acoustics - Noise test code for fastener driving tools - Engineering method

328.

EN 12581:2005+A1:2010

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements

329.

EN 12609:2021

Truck mixers - Safety requirements

330.

EN 12621:2006+A1:2010

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

331.

EN 12622:2009+A1:2013

Safety of machine tools - Hydraulic press brakes

332.

EN 12629-1:2000+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements

333.

EN 12629-2:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines

334.

EN 12629-3:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines

335.

EN 12629-4:2001+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4: Concrete roof tile making machines

336.

EN 12629-5-1:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis

337.

EN 12629-5-2:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis

338.

EN 12629-5-3:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines

339.

EN 12629-5-4:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines

340.

EN 12629-6:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products

341.

EN 12629-7:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products

342.

EN 12629-8:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete)

343.

EN 12635:2002+A1:2008

Industrial, commercial and garage doors and gates - Installation and use

Restriction: With regard to paragraph 5.1 and Annex D, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.1.2, 1.1.6, 1.2.1, 1.3.7, 1.3.8.2, 1.4.1, 1.4.3 and 1.5.14 of Annex I to Directive 2006/42/EC.

344.

EN 12644-1:2001+A1:2008

Cranes - Information for use and testing - Part 1: Instructions

345.

EN 12644-2:2000+A1:2008

Cranes - Information for use and testing - Part 2: Marking

346.

EN 12649:2008+A1:2011

Concrete compactors and smoothing machines - Safety

347.

EN 12653:1999+A2:2009

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements

348.

EN 12693:2008

Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors

349.

EN 12717:2001+A1:2009

Safety of machine tools - Drilling machines

350.

EN 12733:2018

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

351.

EN 12753:2005+A1:2010

Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements

352.

EN 12757-1:2005+A1:2010

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

353.

EN 12779:2015

Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements

354.

EN 12852:2001+A1:2010

Food processing machinery - Food processors and blenders - Safety and hygiene requirements

355.

EN 12853:2001+A1:2010

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements

EN 12853:2001+A1:2010/AC:2010

356.

EN 12854:2003+A1:2010

Food processing machinery - Beam mixers - Safety and hygiene requirements

357.

EN 12855:2003+A1:2010

Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements

358.

EN 12881-1:2014

Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

359.

EN 12881-2:2005+A1:2008

Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

360.

EN 12882:2015

Conveyor belts for general purpose use - Electrical and flammability safety requirements

361.

EN 12921-1:2005+A1:2010

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

362.

EN 12921-2:2005+A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids

363.

EN 12921-3:2005+A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids

364.

EN 12921-4:2005+A1:2008

Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents

365.

EN 12965:2019

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety

366.

EN 12978:2003+A1:2009

Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods

367.

EN 12984:2005+A1:2010

Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene requirements

368.

EN 12999:2020

Cranes - Loader cranes

369.

EN 13000:2010+A1:2014

Cranes - Mobile cranes

370.

EN 13001-1:2015

Cranes - General design - Part 1: General principles and requirements

371.

EN 13001-2:2021

Crane safety - General design - Part 2: Load actions

372.

EN 13001-3-1:2012+A2:2018

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

373.

EN 13001-3-2:2014

Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems

374.

EN 13001-3-3:2014

Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts

375.

EN 13001-3-5:2016+A1:2021

Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks

376.

EN 13001-3-6:2018+A1:2021

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders

377.

EN 13015:2001+A1:2008

Maintenance for lifts and escalators - Rules for maintenance instructions

378.

EN 13020:2015

Road surface treatment machines - Safety requirements

379.

EN 13023:2003+A1:2010

Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3

380.

EN 13035-1:2008

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory

381.

EN 13035-2:2008

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory

382.

EN 13035-3:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines

EN 13035-3:2003+A1:2009/AC:2010

383.

EN 13035-4:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables

384.

EN 13035-5:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking

385.

EN 13035-6:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out

386.

EN 13035-7:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass

387.

EN 13035-9:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations

388.

EN 13035-11:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines

389.

EN 13042-1:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder

390.

EN 13042-2:2004+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 2: Handling machines for feeding

391.

EN 13042-3:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines

392.

EN 13042-5:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 5: Presses

393.

EN 13059:2002+A1:2008

Safety of industrial trucks - Test methods for measuring vibration

394.

EN 13102:2005+A1:2008

Ceramic machines - Safety - Loading and unloading of fine clay tiles

395.

EN 13112:2002+A1:2009

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

396.

EN 13113:2002+A1:2010

Tannery machines - Roller coating machines - Safety requirements

397.

EN 13114:2002+A1:2009

Tannery machines - Rotating process vessels - Safety requirements

398.

EN 13120:2009+A1:2014

Internal blinds - Performance requirements including safety

EN 13120:2009+A1:2014/AC:2015

399.

EN 13128:2001+A2:2009

Safety of machine tools - Milling machines (including boring machines)

EN 13128:2001+A2:2009/AC:2010

400.

EN 13135:2013+A1:2018

Cranes - Safety - Design - Requirements for equipment

401.

EN 13155:2003+A2:2009

Cranes - Safety - Non-fixed load lifting attachments

402.

EN 13157:2004+A1:2009

Cranes - Safety - Hand powered cranes

403.

EN 13204:2016

Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements

404.

EN 13208:2003+A1:2010

Food processing machinery - Vegetable peelers - Safety and hygiene requirements

405.

EN 13241:2003+A2:2016

Industrial, commercial, garage doors and gates — Product standard, performance characteristics

Restriction: With regard to paragraphs 4.2.2, 4.2.6, 4.3.2, 4.3.3, 4.3.4, 4.3.6, this publication does not concern the reference to EN 12453:2000, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.3.7 and 1.4.3 of Annex I to Directive 2006/42/EC.

406.

EN 13288:2005+A1:2009

Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements

407.

EN 13289:2001+A1:2013

Pasta processing plants - Dryers and coolers - Safety and hygiene requirements

408.

EN 13367:2005+A1:2008

Ceramic machines - Safety - Transfer platforms and cars

EN 13367:2005+A1:2008/AC:2009

409.

EN 13378:2001+A1:2013

Pasta processing plants - Pasta presses - Safety and hygiene requirements

410.

EN 13379:2001+A1:2013

Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements

411.

EN 13389:2005+A1:2009

Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements

412.

EN 13390:2002+A1:2009

Food processing machinery - Pie and tart machines - Safety and hygiene requirements

413.

EN 13414-1:2003+A2:2008

Steel wire rope slings - Safety - Part 1: Slings for general lifting service

414.

EN 13414-2:2003+A2:2008

Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer

415.

EN 13414-3:2003+A1:2008

Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings

416.

EN 13418:2013

Plastics and rubber machines - Winding machines for film or sheet - Safety requirements

417.

EN 13448:2001+A1:2009

Agricultural and forestry machinery - Inter-row mowing units - Safety

418.

EN 13457:2004+A1:2010

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements

419.

EN ISO 13482:2014

Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)

420.

EN 13525:2020

Forestry machinery - Wood chippers - Safety

421.

EN 13531:2001+A1:2008

Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)

422.

EN 13534:2006+A1:2010

Food processing machinery - Curing injection machines - Safety and hygiene requirements

423.

EN 13557:2003+A2:2008

Cranes - Controls and control stations

424.

EN 13561:2015

External blinds and awnings - Performance requirements including safety

EN 13561:2015/AC:2016

425.

EN 13570:2005+A1:2010

Food processing machinery - Mixing machines - Safety and hygiene requirements

426.

EN 13586:2020

Cranes - Access

427.

EN 13591:2005+A1:2009

Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements

428.

EN 13617-1:2021

Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

429.

EN 13621:2004+A1:2010

Food processing machinery - Salad dryers - Safety and hygiene requirements

430.

EN 13659:2015

Shutters and external venetian blinds - Performance requirements including safety

431.

EN 13675:2004+A1:2010

Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment

432.

EN 13683:2003+A2:2011

Garden equipment - Integrally powered shredders/chippers - Safety

EN 13683:2003+A2:2011/AC:2013

433.

EN 13684:2018

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

434.

EN 13731:2007

Lifting bag systems for fire and rescue service use - Safety and performance requirements

435.

EN 13732:2022

Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene

436.

EN ISO 13766-2:2018

Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018)

437.

EN 13852-1:2013

Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

438.

EN 13852-3:2021

Cranes - Offshore cranes - Part 3: Light offshore cranes

439.

EN 13862:2021

Floor cutting-off machines - Safety

440.

EN 13870:2015+A1:2021

Food processing machinery - Portion cutting machines - Safety and hygiene requirements

441.

EN 13871:2014

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements

442.

EN 13885:2022

Food processing machinery - Clipping machines - Safety and hygiene requirements

443.

EN 13886:2005+A1:2010

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements

444.

EN 13889:2003+A1:2008

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety

445.

EN 13951:2012

Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygiene in use

446.

EN 13954:2005+A1:2010

Food processing machinery - Bread slicers - Safety and hygiene requirements

447.

EN 13977:2011

Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance

448.

EN 13985:2003+A1:2009

Machine tools - Safety - Guillotine shears

449.

EN 14010:2003+A1:2009

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages

450.

EN 14033-3:2017

Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements

451.

EN 14033-4:2019

Railway applications - Track - Railbound construction and maintenance machines - Part 4: Technical requirements for running, travelling and working on urban rail

452.

EN 14043:2014

High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods

453.

EN 14044:2014

High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods

454.

EN 14070:2003+A1:2009

Safety of machine tools - Transfer and special-purpose machines

EN 14070:2003+A1:2009/AC:2010

455.

EN 14238:2004+A1:2009

Cranes - Manually controlled load manipulating devices

456.

EN ISO 14314:2009

Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)

457.

EN 14439:2006+A2:2009

Cranes - Safety - Tower cranes

458.

EN 14462:2005+A1:2009

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

459.

EN 14466:2005+A1:2008

Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests

460.

EN 14492-1:2006+A1:2009

Cranes - Power driven winches and hoists - Part 1: Power driven winches

EN 14492-1:2006+A1:2009/AC:2010

461.

EN 14492-2:2006+A1:2009

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

EN 14492-2:2006+A1:2009/AC:2010

462.

EN 14502-2:2005+A1:2008

Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations

463.

EN 14655:2005+A1:2010

Food processing machinery - Baguette slicers - Safety and hygiene requirements

464.

EN 14656:2006+A1:2010

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals

465.

EN 14658:2005+A1:2010

Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining

466.

EN 14673:2006+A1:2010

Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals

467.

EN 14677:2008

Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel

468.

EN 14681:2006+A1:2010

Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces

469.

EN 14710-1:2005+A2:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements

470.

EN 14710-2:2005+A2:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verification of general and safety requirements

471.

EN 14753:2007

Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel

472.

EN 14886:2008

Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements

473.

EN 14910:2007+A1:2009

Garden equipment - Walk-behind combustion engine powered trimmers - Safety

474.

EN 14930:2007+A1:2009

Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and hand-held machines - Determination of accessibility of hot surfaces

475.

EN 14957:2006+A1:2010

Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements

476.

EN 14958:2006+A1:2009

Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements

477.

EN 14973:2015

Conveyor belts for use in underground installations - Electrical and flammability safety requirements

478.

EN ISO 14982:2009

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

479.

EN 14985:2012

Cranes - Slewing jib cranes

480.

EN 15000:2008

Safety of industrial trucks - Self propelled variable reach trucks - Specification, performance and test requirements for longitudinal load moment indicators and longitudinal load moment limiters

481.

EN 15011:2020

Cranes - Bridge and gantry cranes

482.

EN 15027:2007+A1:2009

Transportable wall saw and wire saw equipment for job site - Safety

483.

EN 15056:2006+A1:2009

Cranes - Requirements for container handling spreaders

484.

EN 15059:2009+A1:2015

Snow grooming equipment - Safety requirements

485.

EN 15061:2007+A1:2008

Safety of machinery - Safety requirements for strip processing line machinery and equipment

486.

EN 15067:2007

Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements

487.

EN 15093:2008

Safety of Machinery - Safety requirements for hot flat rolling mills

488.

EN 15094:2008

Safety of Machinery - Safety requirements for cold flat rolling mills

489.

EN 15095:2007+A1:2008

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements

490.

EN 15162:2008

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

491.

EN 15163-1:2022

Machines and installations for the exploitation and processing of natural stone - Safety - Part 1: Requirements for stationary diamond wire saws

492.

EN 15163-2:2022

Machines and installations for the exploitation and processing of natural stone - Safety - Part 2: Requirements for transportable diamond wire saws

493.

EN 15164:2008

Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines

494.

EN 15166:2008

Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements

495.

EN 15194:2017

Cycles – Electrically power assisted cycles – EPAC Bicycles

Restriction 1: Harmonised standard EN 15194:2017 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.5, 1.5.6 and 1.5.7 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account the risks associated with extreme temperatures, fire and explosion.

Restriction 2: Harmonised standard EN 15194:2017 does not confer a presumption of conformity with the essential health and safety requirements set out in points 1.5.9 and 3.6.3.1 of Annex I to Directive 2006/42/EC, which require machinery to be designed and constructed to take into account the risks resulting from vibrations, and that machinery must be provided with the measurement of vibrations transmitted by the machinery to the operator of the machinery.

496.

EN 15268:2008

Petrol filling stations - Safety requirements for the construction of submersible pump assemblies

497.

EN 15503:2009+A2:2015

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

498.

EN 15571:2020

Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines

499.

EN 15572:2015

Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines

500.

EN 15695-1:2017

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures

501.

EN 15695-2:2017

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures

502.

EN 15700:2011

Safety for conveyor belts for winter sport or leisure use

503.

EN ISO 15744:2008

Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)

504.

EN 15746-2:2010+A1:2011

Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements

505.

EN 15774:2010

Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene requirements

506.

EN 15811:2014

Agricultural machinery - Fixed guards and interlocked guards with or without guard locking for moving transmission parts (ISO/TS 28923:2012 modified)

507.

EN 15830:2012

Rough-terrain variable reach trucks - Visibility - Test methods and verification

508.

EN 15861:2012

Food processing machinery - Smokehouses - Safety and hygiene requirements

509.

EN 15895:2011+A1:2018

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

510.

EN 15949:2012

Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills

511.

EN 15954-2:2013

Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements

512.

EN 15955-2:2013

Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements

513.

EN 15997:2011

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

EN 15997:2011/AC:2012

514.

EN 16005:2012

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

EN 16005:2012/AC:2015

515.

EN 16029:2012

Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two-wheel motor vehicles - Safety requirements and test methods

516.

EN ISO 16089:2015

Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)

517.

EN ISO 16092-1:2018

Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)

518.

EN ISO 16092-2:2020

Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)

519.

EN ISO 16092-3:2018

Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017)

520.

EN ISO 16092-4:2020

Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)

521.

EN ISO 16093:2017

Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)

522.

EN ISO 16119-1:2013

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)

523.

EN ISO 16119-2:2013

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom sprayers (ISO 16119-2:2013, Corrected version 2017-03)

524.

EN ISO 16119-3:2013

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 16119-3:2013)

525.

EN ISO 16119-4:2014

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)

526.

EN 16191:2014

Tunnelling machinery - Safety requirements

527.

EN 16203:2014

Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counterbalanced Trucks

528.

EN 16228-1:2014+A1:2021

Drilling and foundation equipment - Safety - Part 1: Common requirements

529.

EN 16228-2:2014+A1:2021

Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining

530.

EN 16228-3:2014+A1:2021

Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)

531.

EN 16228-4:2014+A1:2021

Drilling and foundation equipment - Safety - Part 4: Foundation equipment

532.

EN 16228-5:2014+A1:2021

Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment

533.

EN 16228-6:2014+A1:2021

Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment

534.

EN 16228-7:2014+A1:2021

Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment

535.

EN 16230-1:2013+A1:2014

Leisure karts - Part 1: Safety requirements and test methods for karts

536.

EN ISO 16230-1:2015

Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)

537.

EN ISO 16231-1:2013

Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013)

538.

EN ISO 16231-2:2015

Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)

539.

EN 16246:2012

Agricultural machinery - Backhoes - Safety

540.

EN 16252:2012

Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements

541.

EN 16307-1:2020

Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks

542.

EN 16307-5:2013

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

543.

EN 16307-6:2014

Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers

544.

EN 16327:2014

Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)

545.

EN 16474:2015

Plastics and rubber machines - Tyre curing machines - Safety requirements

546.

EN 16486:2014+A1:2020

Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements

547.

EN 16500:2014

Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements

548.

EN 16517:2021

Agricultural and forestry machinery - Mobile yarders for timber logging - Safety

549.

EN 16564:2020

Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions

550.

EN 16590-3:2014

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2010 modified)

551.

EN 16590-4:2014

Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2010, modified)

552.

EN 16712-4:2018

Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam equipment - Part 4: High expansion foam generators PN16

553.

EN 16719:2018

Transport platforms

554.

EN 16743:2016

Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements

555.

EN 16770:2018

Safety of woodworking machines - Chip and dust extraction systems for indoor installation - Safety requirements

556.

EN 16774:2016

Safety of machinery - Safety requirements for steel converter and associated equipment

557.

EN 16808:2020

Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators

558.

EN 16851:2017+A1:2020

Cranes - Light crane systems

559.

EN 16952:2018+A1:2021

Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety

560.

EN 16985:2018

Spray booths for organic coating material - Safety requirements

561.

EN 17003:2021

Road vehicles - Roller brake testers for vehicles of more than 3,5 tons GVW - Safety requirements

562.

EN 17059:2018

Plating and anodizing lines - Safety requirements

563.

EN 17067:2018

Forestry machinery - Safety requirements on radio remote controls

564.

EN 17088:2021

Side curtain ventilation systems - Safety

565.

EN 17106-1:2021

Road operation machinery - Safety - Part 1: General requirements

566.

EN 17106-2:2021

Road operation machinery - Safety - Part 2: Specific requirements for road surface cleaning machines

567.

EN 17106-3-1:2021

Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for snow clearing machines with rotating tools and snow ploughs

568.

EN 17106-3-2:2021

Road operation machinery - Safety - Part 3-2: Winter service machines - Specific requirements for spreading machines

569.

EN 17106-4:2021

Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines

570.

EN 17281:2021

Safety requirements - Vehicle cleaning equipment

571.

EN 17348:2022

Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres

572.

EN 17352:2022

Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods

573.

EN ISO 17916:2016

Safety of thermal cutting machines (ISO 17916:2016)

574.

EN ISO 18063-2:2021

Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021)

575.

EN ISO 19085-1:2021

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021)

576.

EN ISO 19085-2:2021

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2021)

577.

EN ISO 19085-3:2021

Woodworking machines - Safety - Part 3: Numerically controlled (NC/CNC) boring and routing machines (ISO 19085-3:2021)

578.

EN ISO 19085-4:2018

Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018)

579.

EN ISO 19085-5:2017

Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)

580.

EN ISO 19085-6:2017

Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO 19085-6:2017)

581.

EN ISO 19085-7:2019

Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)

582.

EN ISO 19085-8:2018

Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017)

583.

EN ISO 19085-9:2020

Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019)

584.

EN ISO 19085-10:2019

Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018)

EN ISO 19085-10:2019/A11:2020

585.

EN ISO 19085-11:2020

Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020)

586.

EN ISO 19085-13:2020

Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020)

587.

EN ISO 19085-14:2021

Woodworking machines - Safety - Part 14: Four-sided moulding machines (ISO 19085-14:2021)

588.

EN ISO 19085-15:2021

Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021)

589.

EN ISO 19085-16:2021

Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:2021)

590.

EN ISO 19085-17:2021

Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021)

591.

EN ISO 19225:2017

Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017)

EN ISO 19225:2017/A1:2019

592.

EN ISO 19296:2018

Mining - Mobile machines working underground - Machine safety (ISO 19296:2018)

593.

EN ISO 19432-1:2020

Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020)

594.

EN ISO 19472-2:2022

Machinery for forestry - Winches - Part 2: Traction aid winches (ISO 19472-2:2022)

595.

EN ISO 19932-1:2013

Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)

596.

EN ISO 19932-2:2013

Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013)

597.

EN ISO 20361:2019

Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019)

EN ISO 20361:2019/A11:2020

598.

EN ISO 20430:2020

Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)

599.

EN ISO 21904-1:2020

Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020)

600.

EN ISO 22291:2022

Safety requirements for wetlaid-nonwoven machinery (ISO 22291:2022)

601.

EN ISO 22867:2021

Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)

602.

EN ISO 22868:2021

Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2021)

603.

EN ISO 23062:2022

Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)

604.

EN ISO 23125:2015

Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)

605.

EN ISO 28139:2009

Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements (ISO 28139:2009)

606.

EN ISO 28881:2022

Machine tools - Safety - Electrical discharge machines (ISO 28881:2022)

607.

EN ISO 28927-1:2019

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2019)

608.

EN ISO 28927-2:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)

EN ISO 28927-2:2009/A1:2017

609.

EN ISO 28927-3:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO 28927-3:2009)

610.

EN ISO 28927-4:2010

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)

EN ISO 28927-4:2010/A1:2018

611.

EN ISO 28927-5:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO 28927-5:2009)

EN ISO 28927-5:2009/A1:2015

612.

EN ISO 28927-6:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO 28927-6:2009)

613.

EN ISO 28927-7:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO 28927-7:2009)

614.

EN ISO 28927-8:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO 28927-8:2009)

EN ISO 28927-8:2009/A1:2015

615.

EN ISO 28927-9:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO 28927-9:2009)

616.

EN ISO 28927-10:2011

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011)

617.

EN ISO 28927-11:2011

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers (ISO 28927-11:2011)

618.

EN ISO 28927-12:2012

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 12: Die grinders (ISO 28927-12:2012)

619.

EN ISO 28927-13:2022

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)

620.

EN 50223:2015

Stationary electrostatic application equipment for ignitable flock material - Safety requirements

621.

EN 50348:2010

Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements

EN 50348:2010/AC:2010

622.

EN 50434:2014

Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers

623.

EN 50569:2013

Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors

EN 50569:2013/A1:2018

624.

EN 50570:2013

Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers

EN 50570:2013/A1:2018

625.

EN 50571:2013

Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines

EN 50571:2013/A1:2018

626.

EN 50580:2012

Safety of hand-held electric motor operated tools - Particular requirements for spray guns

EN 50580:2012/A1:2013

627.

EN 50636-2-91:2014

Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers#IEC 60335-2-91:2008 (Modified)

628.

EN 50636-2-92:2014

Household and similar electrical appliances - Safety - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators (IEC 60335-2-92:2002, modified)

629.

EN 50636-2-94:2014

Household and similar electrical appliances - Safety - Part 2-94: Particular requirements for scissors type grass shears (IEC 60335-2-94:2008, modified)

630.

EN 50636-2-100:2014

Household and similar electrical appliances - Safety - Part 2-100: Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums (IEC 60335-2-100:2002, modified)

631.

EN 50636-2-107:2015

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012, modified)

EN 50636-2-107:2015/A1:2018

EN 50636-2-107:2015/A2:2020

EN 50636-2-107:2015/A3:2021

632.

EN 60204-31:2013

Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems (IEC 60204-31:2013)

633.

EN 60335-1:2012

Household and similar electrical appliances - Safety - Part 1: General requirements (IEC 60335-1:2010, modified)

EN 60335-1:2012/AC:2014

EN 60335-1:2012/A11:2014

EN 60335-1:2012/A13:2017

EN 60335-1:2012/A15:2021

634.

EN 60335-2-8:2015

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances (IEC 60335-2-8:2012, modified)

EN 60335-2-8:2015/A1:2016

635.

EN 60335-2-23:2003

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care (IEC 60335-2-23:2003)

EN 60335-2-23:2003/A2:2015

636.

EN 60335-2-36:2002

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements (IEC 60335-2-36:2002)

EN 60335-2-36:2002/A11:2012

EN 60335-2-36:2002/AC:2007

637.

EN 60335-2-37:2002

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers (IEC 60335-2-37:2002)

EN 60335-2-37:2002/A11:2012

EN 60335-2-37:2002/AC:2007

EN 60335-2-37:2002/A12:2016

638.

EN 60335-2-40:2003

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2002, modified)

EN 60335-2-40:2003/A11:2004

EN 60335-2-40:2003/A12:2005

EN 60335-2-40:2003/A1:2006

EN 60335-2-40:2003/A13:2012/AC:2013

EN 60335-2-40:2003/A13:2012

EN 60335-2-40:2003/A2:2009

EN 60335-2-40:2003/AC:2006

EN 60335-2-40:2003/AC:2010

639.

EN IEC 60335-2-41:2021

Household and similar electrical appliances - Safety - Particular requirements for pumps (IEC 60335-2-41:2012)

EN IEC 60335-2-41:2021/A11:2021

640.

EN 60335-2-42:2003

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens (IEC 60335-2-42:2002)

EN 60335-2-42:2003/A11:2012

EN 60335-2-42:2003/AC:2007

641.

EN 60335-2-47:2003

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans (IEC 60335-2-47:2002)

EN 60335-2-47:2003/A11:2012

EN 60335-2-47:2003/AC:2007

642.

EN 60335-2-48:2003

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters (IEC 60335-2-48:2002)

EN 60335-2-48:2003/A11:2012

EN 60335-2-48:2003/AC:2007

643.

EN 60335-2-49:2003

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm (IEC 60335-2-49:2002)

EN 60335-2-49:2003/A11:2012

EN 60335-2-49:2003/AC:2007

644.

EN 60335-2-58:2005

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines (IEC 60335-2-58:2002, modified)

EN 60335-2-58:2005/A12:2016

EN 60335-2-58:2005/A2:2015

645.

EN 60335-2-65:2003

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances (IEC 60335-2-65:2002)

EN 60335-2-65:2003/A11:2012

646.

EN 60335-2-67:2012

Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines for commercial use (IEC 60335-2-67:2012, modified)

647.

EN 60335-2-68:2012

Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use (IEC 60335-2-68:2012, modified)

648.

EN 60335-2-69:2012

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use (IEC 60335-2-69:2012, modified)

649.

EN 60335-2-72:2012

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use (IEC 60335-2-72:2012, modified)

650.

EN 60335-2-79:2012

Household and similar electrical appliances - Safety - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners (IEC 60335-2-79:2012, modified)

651.

EN IEC 60335-2-89:2022

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor (IEC 60335-2-89:2019)

EN IEC 60335-2-89:2022/A11:2022

652.

EN 60335-2-95:2015

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use (IEC 60335-2-95:2011, modified)

EN 60335-2-95:2015/A1:2015

653.

EN 60335-2-97:2006

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97:2002, modified + A1:2004, modified)

EN 60335-2-97:2006/A12:2015

654.

EN 60335-2-102:2016

Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections (IEC 60335-2-102:2004, modified, IEC 60335-2-102:2004/A1:2008, modified, IEC 60335-2-102:2004/A2:2012, modified)

655.

EN 60335-2-103:2015

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows (IEC 60335-2-103:2006, modified + A1:2010, modified)

656.

EN 60519-1:2015

Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements (IEC 60519-1:2015)

657.

EN 60745-2-12:2009

Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators (IEC 60745-2-12:2003, modified + A1:2008)

658.

EN 60745-2-16:2010

Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers (IEC 60745-2-16:2008, modified)

659.

EN 60745-2-18:2009

Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modified + A1:2008)

660.

EN 60745-2-19:2009

Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers (IEC 60745-2-19:2005, modified)

EN 60745-2-19:2009/A1:2010

661.

EN 60745-2-20:2009

Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws (IEC 60745-2-20:2003, modified + A1:2008)

662.

EN 60745-2-22:2011

Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines (IEC 60745-2-22:2011, modified)

EN 60745-2-22:2011/A11:2013

663.

EN 60745-2-23:2013

Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for die grinders and small rotary tools (IEC 60745-2-23:2012, modified)

664.

EN 60947-5-3:2013

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) (IEC 60947-5-3:2013)

665.

EN 60947-5-5:1997

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function (IEC 60947-5-5:1997)

EN 60947-5-5:1997/A1:2005

EN 60947-5-5:1997/A11:2013

EN 60947-5-5:1997/A2:2017

666.

EN 61029-2-3:2011

Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers (IEC 61029-2-3:1993, modified) + A1:2001)

667.

EN 61029-2-5:2011

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993, modified) + A1:2001, modified)

EN 61029-2-5:2011/A11:2015

668.

EN 61029-2-8:2010

Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995, modified + A1:1999)

669.

EN 61029-2-11:2012

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws (IEC 61029-2-11:2001, modified)

EN 61029-2-11:2012/A11:2013

670.

EN 61029-2-12:2011

Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines (IEC 61029-2-12:2010, modified)

671.

EN 62841-1:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements (IEC 62841-1:2014, modified)

EN 62841-1:2015/AC:2015

EN 62841-1:2015/A11:2022

672.

EN 62841-2-1:2018

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, modified)

EN 62841-2-1:2018/A11:2019

EN 62841-2-1:2018/A12:2022

EN 62841-2-1:2018/A1:2022

673.

EN 62841-2-2:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches (IEC 62841-2-2:2014, modified)

EN 62841-2-2:2014/AC:2015

674.

EN IEC 62841-2-3:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-3: Particular requirements for hand-held grinders, disc-type polishers and disc-type sanders (IEC 62841-2-3:2020)

EN IEC 62841-2-3:2021/A11:2021

675.

EN 62841-2-4:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (IEC 62841-2-4:2014, modified)

EN 62841-2-4:2014/AC:2015

676.

EN 62841-2-5:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws (IEC 62841-2-5:2014, modified)

677.

EN IEC 62841-2-6:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers (IEC 62841-2-6:2020)

EN IEC 62841-2-6:2020/A11:2020

678.

EN 62841-2-8:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-8: Particular requirements for hand-held shears and nibblers (IEC 62841-2-8:2016, modified)

679.

EN 62841-2-9:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for hand-held tappers and threaders (IEC 62841-2-9:2015, modified)

EN 62841-2-9:2015/AC:2016-10

680.

EN 62841-2-10:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requirements for hand-held mixers (IEC 62841-2-10:2017, modified)

681.

EN 62841-2-11:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015, modified)

EN 62841-2-11:2016/A1:2020

682.

EN 62841-2-14:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requirements for hand-held planers (IEC 62841-2-14:2015, modified)

683.

EN 62841-2-17:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017, modified)

684.

EN 62841-2-21:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-21: Particular requirements for hand-held drain cleaners (IEC 62841-2-21:2017, modified)

685.

EN 62841-3-1:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)

EN 62841-3-1:2014/AC:2015

EN 62841-3-1:2014/A11:2017

EN 62841-3-1:2014/A1:2021

EN 62841-3-1:2014/A12:2021

686.

EN 62841-3-4:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016, modified)

EN 62841-3-4:2016/A11:2017

EN 62841-3-4:2016/A12:2020

687.

EN IEC 62841-3-5:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-5: Particular requirements for transportable band saws (IEC 62841-3-5:2022)

EN IEC 62841-3-5:2022/A11:2022

688.

EN 62841-3-6:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)

EN 62841-3-6:2014/AC:2015

EN 62841-3-6:2014/A11:2017

EN 62841-3-6:2014/A12:2022

EN 62841-3-6:2014/A1:2022

689.

EN IEC 62841-3-7:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws (IEC 62841-3-7:2020)

EN IEC 62841-3-7:2021/A11:2021

690.

EN IEC 62841-3-9:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2020)

EN IEC 62841-3-9:2020/A11:2020

691.

EN 62841-3-10:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015, modified)

EN 62841-3-10:2015/AC:2016-07

EN 62841-3-10:2015/A11:2017

EN 62841-3-10:2015/A12:2022

EN 62841-3-10:2015/A1:2022

692.

EN 62841-3-12:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines (IEC 62841-3-12:2017)

693.

EN 62841-3-13:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills (IEC 62841-3-13:2017, modified)

694.

EN 62841-3-14:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners (IEC 62841-3-14:2017, modified)

695.

EN 62841-4-1:2020

Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws (IEC 62841-4-1:2017, modified)

696.

EN 62841-4-2:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, modified)

EN 62841-4-2:2019/A1:2022

EN 62841-4-2:2019/A11:2022

697.

EN IEC 62841-4-3:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-3: Particular requirements for pedestrian controlled walk-behind lawnmowers (IEC 62841-4-3:2020)

EN IEC 62841-4-3:2021/A11:2021

698.

EN IEC 62841-4-5:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-5: Particular requirements for grass shears (IEC 62841-4-5:2021)

EN IEC 62841-4-5:2021/A11:2021

699.

EN IEC 62841-4-7:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-7: Particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators (IEC 62841-4-7:2022)

EN IEC 62841-4-7:2022/A11:2022

700.

EN ISO/IEC 80079-38:2016

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)

EN ISO/IEC 80079-38:2016/A1:2018

ANNEX II

PART ONE

B-TYPE STANDARDS

1.   Explanatory note.

B-type standards deal with specific aspects of machinery safety or specific types of safeguard that can be used across a wide range of categories of machinery. Application of the specifications of B-type standards confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive that they cover when a C-type standard or the manufacturer’s risk assessment shows that a technical solution specified by the B-type standard is adequate for the particular category or model of machinery concerned. Application of B-type standards that give specifications for safety components that are independently placed on the market confers a presumption of conformity for the safety components concerned and for the essential health and safety requirements covered by the standards.

2.   List of references of standards.

No

Reference of standard

Date of withdrawal

1.

EN ISO 11202:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)

11 October 2023

2.

EN 15967:2011

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours

2 February 2025

3.

EN 62061:2005

Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems (IEC 62061:2005)

EN 62061:2005/AC:2010

EN 62061:2005/A1:2013

EN 62061:2005/A2:2015

11 October 2023

PART TWO

C-TYPE STANDARDS

1.   Explanatory note.

C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.

2.   List of references of standards.

No

Reference of standard

Date of withdrawal

1.

EN 280:2013+A1:2015

Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

2 February 2025

2.

EN 303-5:2012

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

11 October 2023

3.

EN 415-3:1999+A1:2009

Safety of packaging machines - Part 3: Form, fill and seal machines

2 February 2025

4.

EN 474-2:2006+A1:2008

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

2 February 2025

5.

EN 474-3:2006+A1:2009

Earth-moving machinery - Safety - Part 3: Requirements for loaders

2 February 2025

6.

EN 474-4:2006+A2:2012

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

2 February 2025

7.

EN 474-5:2006+A3:2013

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

2 February 2025

8.

EN 474-6:2006+A1:2009

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

2 February 2025

9.

EN 474-7:2006+A1:2009

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

2 February 2025

10.

EN 474-8:2006+A1:2009

Earth-moving machinery - Safety - Part 8: Requirements for graders

2 February 2025

11.

EN 474-9:2006+A1:2009

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

2 February 2025

12.

EN 474-10:2006+A1:2009

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

2 February 2025

13.

EN 474-11:2006+A1:2008

Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

2 February 2025

14.

EN 474-12:2006+A1:2008

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

2 February 2025

15.

EN 500-4:2011

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

2 February 2025

16.

EN 528:2008

Rail dependent storage and retrieval equipment - Safety requirements

2 February 2024

17.

EN 619:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads

2 February 2025

18.

EN 620:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

2 February 2025

19.

EN 703:2004+A1:2009

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety

2 February 2025

20.

EN 710:1997+A1:2010

Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

EN 710:1997+A1:2010/AC:2012

2 February 2025

21.

EN 746-3:1997+A1:2009

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

2 February 2025

22.

EN 1034-4:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities

2 February 2025

23.

EN 1501-1:2011+A1:2015

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles

11 October 2023

24.

EN 1501-2:2005+A1:2009

Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles

11 October 2023

25.

EN 1501-3:2008

Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles

11 October 2023

26.

EN 1501-5:2011

Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles

11 October 2023

27.

EN 1755:2000+A2:2013

Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flammable gas, vapour, mist and dust

2 February 2024

28.

EN 1756-1:2001+A1:2008

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods

11 October 2023

29.

EN 1807-1:2013

Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws

2 February 2025

30.

EN 1829-1:2010

High pressure water jet machines - Safety requirements - Part 1: Machines

11 October 2023

31.

EN ISO 3691-6:2015

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel carriers (ISO 3691-6:2013)

EN ISO 3691-6:2015/AC:2016

2 February 2025

32.

EN ISO 4254-1:2015

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

2 February 2025

33.

EN ISO 4254-6:2009

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

EN ISO 4254-6:2009/AC:2010

2 February 2025

34.

EN ISO 11680-1:2011

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)

2 February 2025

35.

EN ISO 11680-2:2011

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with back-pack power source (ISO 11680-2:2011)

2 February 2025

36.

EN ISO 11681-1:2011

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011)

2 February 2025

37.

EN ISO 11681-2:2011

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chain-saws for tree service (ISO 11681-2:2011)

EN ISO 11681-2:2011/A1:2017

2 February 2025

38.

EN ISO 11806-1:2011

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 1: Machines fitted with an integral combustion engine (ISO 11806-1:2011)

2 February 2025

39.

EN ISO 11806-2:2011

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011)

2 February 2025

40.

EN ISO 11850:2011

Machinery for forestry - General safety requirements (ISO 11850:2011)

EN ISO 11850:2011/A1:2016

2 February 2025

41.

EN 12012-4:2006+A1:2008

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

2 February 2024

42.

EN 12158-1:2000+A1:2010

Builders’ hoists for goods - Part 1: Hoists with accessible platforms

2 February 2025

43.

EN 12312-5:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment

11 October 2023

44.

EN 12331:2003+A2:2010

Food processing machinery - Mincing machines - Safety and hygiene requirements

2 February 2024

45.

EN 12355:2003+A1:2010

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements

2 February 2025

46.

EN 12418:2000+A1:2009

Masonry and stone cutting-off machines for job site - Safety

2 February 2025

47.

EN 12750:2013

Safety of woodworking machines - Four sided moulding machines

2 February 2025

48.

EN 13001-2:2014

Crane safety - General design - Part 2: Load actions

11 October 2023

49.

EN 13001-3-5:2016

Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks

2 February 2025

50.

EN 13019:2001+A1:2008

Machines for road surface cleaning - Safety requirements

2 February 2025

51.

EN 13021:2003+A1:2008

Winter service machines - Safety requirements

2 February 2025

52.

EN 13118:2000+A1:2009

Agricultural machinery - Potato harvesting equipment - Safety

2 February 2025

53.

EN 13140:2000+A1:2009

Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety

2 February 2025

54.

EN 13524:2003+A2:2014

Highway maintenance machines - Safety requirements

2 February 2025

55.

EN 13617-1:2012

Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units

2 February 2025

56.

EN 13732:2013

Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene

2 February 2025

57.

EN 13862:2001+A1:2009

Floor cutting-off machines - Safety

2 February 2025

58.

EN 13870:2015

Food processing machinery - Portion cutting machines - Safety and hygiene requirements

2 February 2025

59.

EN 13885:2005+A1:2010

Food processing machinery - Clipping machines - Safety and hygiene requirements

2 February 2025

60.

EN 15163:2008

Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws

2 February 2024

61.

EN 16228-1:2014

Drilling and foundation equipment - Safety - Part 1: Common requirements

2 February 2025

62.

EN 16228-2:2014

Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining

2 February 2025

63.

EN 16228-3:2014

Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)

2 February 2025

64.

EN 16228-4:2014

Drilling and foundation equipment - Safety - Part 4: Foundation equipment

2 February 2025

65.

EN 16228-5:2014

Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment

2 February 2025

66.

EN 16228-6:2014

Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment

2 February 2025

67.

EN 16228-7:2014

Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment

2 February 2025

68.

EN ISO 18217:2015

Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)

2 February 2025

69.

EN ISO 19085-1:2017

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)

11 October 2023

70.

EN ISO 19085-2:2017

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)

2 February 2025

71.

EN ISO 22867:2011

Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)

2 February 2025

72.

EN ISO 22868:2011

Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO 22868:2011)

11 October 2023

73.

EN ISO 28881:2013

Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)

EN ISO 28881:2013/AC:2013

2 February 2025

74.

EN ISO 28927-1:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO 28927-1:2009)

EN ISO 28927-1:2009/A1:2017

2 February 2025

75.

EN 60335-2-77:2010

Safety of household and similar appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers (IEC 60335-2-77:2002, modified)

2 February 2025

76.

EN 60335-2-89:2010

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor (IEC 60335-2-89:2010)

EN 60335-2-89:2010/A1:2016

EN 60335-2-89:2010/A2:2017

2 February 2025

77.

EN 60745-2-3:2011

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders (IEC 60745-2-3:2006, modified + A1:2010, modified)

EN 60745-2-3:2011/A2:2013

EN 60745-2-3:2011/A11:2014

EN 60745-2-3:2011/A12:2014

EN 60745-2-3:2011/A13:2015

2 February 2025

78.

EN 60745-2-15:2009

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006, modified)

EN 60745-2-15:2009/A1:2010

2 February 2025

79.

EN 62841-1:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements (IEC 62841-1:2014, modified)

EN 62841-1:2015/AC:2015

2 February 2025

ANNEX III

C-TYPE STANDARDS

1.   Explanatory note.

C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.

2.   List of references of standards.

No

Reference of standard

Date of withdrawal

1.

EN 303-5:2021

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

2 February 2025

2.

EN 474-1:2006+A6:2019

Earth-moving machinery - Safety - Part 1: General requirements

Restriction 1: This publication does not concern clause 5.8.1 Visibility-Operator’s field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. Restriction 2: With regards to Annex B.2 – Quick couplers, the harmonised standard EN 474-1:2006+A6:2019 does not confer a presumption of conformity to the essential health and safety requirements 1.1.2 b), 1.1.2 c) and 1.3.3 of Annex I to Directive 2006/42/EC when applied in combination with EN 474-4:2006+A2:2012 requirements for backhoe loaders and EN 474-5:2006+A3:2013 requirements for hydraulic excavators.

2 February 2025

3.

EN 13001-3-6:2018

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders

11 October 2023

4.

EN 16952:2018

Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety

2 February 2025

5.

EN ISO 19085-3:2017

Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)

Restriction: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017 does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to Directive 2006/42/EC, which requires that guards and protective devices must not be easy to by-pass.

2 February 2025

6.

EN 50636-2-107:2015

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012, modified)

EN 50636-2-107:2015/A1:2018

EN 50636-2-107:2015/A2:2020

11 October 2023

7.

EN 60335-1:2012

Household and similar electrical appliances - Safety - Part 1: General requirements (IEC 60335-1:2010, modified)

EN 60335-1:2012/AC:2014

EN 60335-1:2012/A11:2014

EN 60335-1:2012/A13:2017

11 October 2023

8.

EN 62841-4-2:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, modified)

2 February 2025

9.

EN 62841-2-1:2018

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, modified)

EN 62841-2-1:2018/A11:2019

2 February 2025

10.

EN 62841-3-1:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)

EN 62841-3-1:2014/AC:2015

EN 62841-3-1:2014/A11:2017

2 February 2025

11.

EN 62841-3-6:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)

EN 62841-3-6:2014/AC:2015

EN 62841-3-6:2014/A11:2017

2 February 2025

12.

EN 62841-3-10:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015, modified)

EN 62841-3-10:2015/AC:2016-07

EN 62841-3-10:2015/A11:2017

2 February 2025

Markierungen
Leseansicht