COMMISSION DELEGATED REGULATION (EU) 2019/2017
of 11 March 2019
supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of household dishwashers and repealing Commission Delegated Regulation (EU) No 1059/2010
(Text with EEA relevance)
Article 1
Subject matter and scope
Article 2
Definitions
Article 3
Obligations of suppliers
Article 4
Obligations of dealers
Article 5
Obligations of internet hosting platforms
Article 6
Measurement methods
Article 7
Verification procedure for market surveillance purposes
Article 8
Review
Article 9
Repeal
Article 10
Transitional measures
Article 11
Entry into force and application
ANNEX I
Definitions applicable for the annexes
ANNEX II
A.
Energy efficiency classes
Energy efficiency class |
Energy Efficiency Index |
A |
EEI < 32 |
B |
32 ≤ EEI < 38 |
C |
38 ≤ EEI < 44 |
D |
44 ≤ EEI < 50 |
E |
50 ≤ EEI < 56 |
F |
56 ≤ EEI < 62 |
G |
EEI ≥ 62 |
B.
Acoustic airborne noise emission classes
Acoustic airborne noise emission class |
Noise (dB(A) |
A |
n < 39 |
B |
39 ≤ n < 45 |
C |
45 ≤ n < 51 |
D |
51 ≤ n |
ANNEX III
Label
1. LABEL
2. LABEL DESIGN
ANNEX IV
Measurement methods and calculations
1. ENERGY EFFICIENCY INDEX
2. CLEANING PERFORMANCE INDEX
3. DRYING PERFORMANCE INDEX
4. LOW POWER MODES
ANNEX V
Product information sheet
Supplier’s name or trade mark: |
||||
Supplier’s address (2) : |
||||
Model identifier: |
||||
General product parameters: |
||||
Parameter |
Value |
Parameter |
Value |
|
Rated capacity(1) (ps) |
x |
Dimensions in cm |
Height |
x |
Width |
x |
|||
Depth |
x |
|||
EEI(1) |
x,x |
Energy efficiency class(1) |
[A/B/C/D/E/F/G](3) |
|
Cleaning performance index(1) |
x,xx |
Drying performance index(1) |
x,xx |
|
Energy consumption in kWh [per cycle], based on the eco programme using cold water fill. Actual energy consumption will depend on how the appliance is used. |
x,xxx |
Water consumption in litres [per cycle], based on the eco programme. Actual water consumption will depend on how the appliance is used and on the hardness of the water. |
x,x |
|
Programme duration(1) (h:min) |
x:xx |
Type |
[built-in/free-standing] |
|
Airborne acoustical noise emissions(1) (dB(A) re 1 pW) |
x |
Airborne acoustical noise emission class(1) |
[A/B/C/D](3) |
|
Off-mode (W) |
x,xx |
Standby mode (W) |
x,xx |
|
Delay start (W) (if applicable) |
x,xx |
Networked standby (W) (if applicable) |
x,xx |
|
Minimum duration of the guarantee offered by the supplier (2) : |
||||
Additional information: |
||||
Weblink to the supplier’s website, where the information in point 6 of Annex II to Commission Regulation (EU) 2019/2022(1) (2) is found: |
ANNEX VI
Technical documentation
PARAMETER |
UNIT |
VALUE |
Eco programme energy consumption (EPEC) rounded to three decimal places |
kWh/cycle |
X,XXX |
Standard programme energy consumption (SPEC) rounded to three decimal places |
kWh/cycle |
X,XXX |
Energy Efficiency Index (EEI) |
— |
X,X |
Eco programme water consumption (EPWC) rounded to one decimal place |
l/cycle |
X,X |
Cleaning performance index (IC) |
— |
X,XX |
Drying performance index (ID) |
— |
X,XX |
Duration of the eco programme (Tt) rounded to the nearest minute |
h:min |
X:XX |
Power consumption in off-mode (Po) rounded to two decimal places |
W |
X,XX |
Power consumption in standby mode (Psm) rounded to two decimal places |
W |
X,XX |
Does standby mode include the display of information? |
— |
Yes/No |
Power consumption in standby mode (Psm) in condition of networked standby (if applicable), rounded to two decimal places |
W |
X,XX |
Power consumption in delay start (Pds) (if applicable) rounded to two decimal places |
W |
X,XX |
Airborne acoustical noise emissions |
dB(A) re 1 pW |
X |
ANNEX VII
Information to be provided in visual advertisements, in technical promotional material in distance selling and in telemarketing, except distance selling on the internet
Figure 1
Coloured/monochrome left/right arrow, with range of energy efficiency classes indicated
ANNEX VIII
Information to be provided in the case of distance selling through the internet
Figure 2
Coloured left/right arrow, with range of energy efficiency classes indicated
ANNEX IX
Verification procedure for market surveillance purposes
Parameter |
Verification tolerances |
Eco programme energy consumption (EPEC) |
The determined value (*1) shall not exceed the declared value of EPEC by more than 5 %. |
Eco programme water consumption (EPWC) |
The determined value (*1) shall not exceed the declared value of EPWC by more than 5 %. |
Cleaning performance index (IC) |
The determined value (*1) shall not be less than the declared value of IC by more than 14 %. |
Drying performance index (ID) |
The determined value (*1) shall not be less than the declared value of ID by more than 12 %. |
Programme duration (Tt) |
The determined value (*1) shall not exceed the declared values Tt by more than 5 % or 10 minutes, whichever is the longer. |
Power consumption in off mode (Po) |
The determined value (*1) of power consumption Po shall not exceed the declared value by more than 0,10 W. |
Power consumption in standby mode (Psm) |
The determined value (*1) of power consumption Psm shall not exceed the declared value by more than 10 % if the declared value is higher than 1,00 W, or by more than 0,10 W if the declared value is lower than or equal to 1,00 W. |
Power consumption in delay start (Pds) |
The determined value (*1) of power consumption Pds shall not exceed the declared value by more than 10 % if the declared value is higher than 1,00 W, or by more than 0,10 W if the declared value is lower than or equal to 1,00 W. |
Airborne acoustic noise emissions |
The determined value (*1) shall not exceed the declared value by more than 2 dB(A) re 1pW. |