COMMISSION IMPLEMENTING REGULATION (EU) 2017/53

of 14 December 2016

concerning the authorisation of butan-1-ol, hexan-1-ol, octan-1-ol, nonan-1-ol, dodecan-1-ol, heptan-1-ol, decan-1-ol, pentan-1-ol, ethanol, acetaldehyde, propanal, butanal, pentanal, hexanal, octanal, decanal, dodecanal, nonanal, heptanal, undecanal, 1,1-diethoxyethane, formic acid, acetic acid, propionic acid, valeric acid, hexanoic acid, octanoic acid, decanoic acid, dodecanoic acid, oleic acid, hexadecanoic acid, tetradecanoic acid, heptanoic acid, nonanoic acid, ethyl acetate, propyl acetate, butyl acetate, hexyl acetate, octyl acetate, nonyl acetate, decyl acetate, dodecyl acetate, heptyl acetate, methyl acetate, methyl butyrate, butyl butyrate, pentyl butyrate, hexyl butyrate, octyl butyrate, ethyl decanoate, ethyl hexanoate, propyl hexanoate, pentyl hexanoate, hexyl hexanoate, methyl hexanoate, ethyl formate, ethyl dodecanoate, ethyl tetradecanoate, ethyl nonanoate, ethyl octanoate, ethyl propionate, methyl propionate, ethyl valerate, butyl valerate, ethyl hex-3-enoate, ethyl hexadecanoate, ethyl trans-2-butenoate, ethyl undecanoate, butyl isovalerate, hexyl isobutyrate, methyl 2-methylbutyrate, hexyl 2-methylbutyrate, triethyl citrate, hexyl isovalerate and methyl 2-methylvalerate as feed additives for all animal species

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition(1), and in particular Article 9(2) thereof,

Whereas:

(1) Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation. Article 10 of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EEC(2).

(2) Butan-1-ol, Hexan-1-ol, octan-1-ol, nonan-1-ol, dodecan-1-ol, heptan-1-ol, decan-1-ol, pentan-1-ol, ethanol, acetaldehyde, propanal, butanal, pentanal, hexanal, octanal, decanal, dodecanal, nonanal, heptanal, undecanal, 1,1-diethoxyethane, formic acid, acetic acid, propionic acid, valeric acid, hexanoic acid, octanoic acid, decanoic acid, dodecanoic acid, oleic acid, hexadecanoic acid, tetradecanoic acid, heptanoic acid, nonanoic acid, ethyl acetate, propyl acetate, butyl acetate, hexyl acetate, octyl acetate, nonyl acetate, decyl acetate, dodecyl acetate, heptyl acetate, methyl acetate, methyl butyrate, butyl butyrate, pentyl butyrate, hexyl butyrate, octyl butyrate, ethyl decanoate, ethyl hexanoate, propyl hexanoate, pentyl hexanoate, hexyl hexanoate, methyl hexanoate, ethyl formate, ethyl dodecanoate, ethyl tetradecanoate, ethyl nonanoate, ethyl octanoate, ethyl propionate, methyl propionate, ethyl valerate, butyl valerate, ethyl hex-3-enoate, ethyl hexadecanoate, ethyl trans-2-butenoate, ethyl undecanoate, butyl isovalerate, hexyl isobutyrate, methyl 2-methylbutyrate, hexyl 2-methylbutyrate, triethyl citrate, hexyl isovalerate and methyl 2-methylvalerate hereinafter referred to as ‘the substances concerned’ were authorised without a time limit in accordance with Directive 70/524/EEC as feed additives for all animal species. Those products were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1) of Regulation (EC) No 1831/2003.

(3) In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of the substances concerned as feed additives for all animal species. The applicant requested those additives to be classified in the additive category ‘sensory additives’. This application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.

(4) The European Food Safety Authority (‘the Authority’) concluded in its opinion of 12 March 2013(3) that, under the proposed conditions of use in feed, the substances concerned do not have adverse effects on animal health, human health or the environment. The Authority further concluded that those substances are flavouring agents authorised in food for which the efficacy is demonstrated as the functions of the additive applied for feed use and described for food use are similar.

(5) The Authority concluded that no safety concerns would arise for users provided that appropriate protective measures are taken. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the Method of analysis of the feed additives in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.

(6) The assessment of the substances concerned shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of those substances should be authorised as specified in the Annex to this Regulation. Maximum recommended contents should be set up for those substances. Those substances may be used within a compound feed subsequently administered via water.

(7) Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation for the substances concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.

(8) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,

HAS ADOPTED THIS REGULATION:

Article 1

Authorisation

The substances specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘flavouring compounds’, are authorised as feed additives in animal nutrition subject to the conditions laid down in that Annex.

Article 2

Transitional Measures

1. The substances specified in the Annex and premixtures containing those substances, which are produced and labelled before 6 August 2017 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted.

2. Compound feed and feed materials containing the substances specified in the Annex which are produced and labelled before 6 February 2018 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for food-producing animals.

3. Compound feed and feed materials containing the substances specified in the Annex which are produced and labelled before 6 February 2019 in accordance with the rules applicable before 6 February 2017 may continue to be placed on the market and used until the existing stocks are exhausted if they are intended for non-food-producing animals.

Article 3

Entry into force

This Regulation shall enter into force on the twentieth day following that of its publication in the

Official Journal of the European Union

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 14 December 2016.

For the Commission

The President

Jean-Claude JUNCKER

(1)

OJ L 268, 18.10.2003, p. 29

(2) Council Directive 70/524/EEC of 23 November 1970 concerning additives in feedingstuffs (

OJ L 270, 14.12.1970, p. 1

(3)

EFSA Journal

2013;11(4):3169.

ANNEX

Identification number of the additive

Name of the holder of authorisation

Additive

Composition, chemical formula, description, analytical method

Species or category of animal

Maximum age

Minimum content

Maximum content

Other provisions

End of period of authorisation

mg of active substance/kg of complete feedingstuff with a moisture content of 12 %

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

Category: Sensory additives. Functional group: Flavouring compounds

2b02004

—

Butan-1-ol

Additive composition

Butan-1-ol

Characterisation of the active substance

Butan-1-ol

Produced by chemical synthesis

Purity: min. 99,5 %

Chemical formula: C4H10O

CAS number 71-36-3

FLAVIS 02.004

Method of analysis (1)

For the determination of Butan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

For users of the additive and premixtures, feed business operators, shall establish operational procedures and appropriate organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where risks cannot be reduced to an acceptable level by these procedures and measures, the additive and premixtures shall be used with appropriate personal protective equipment.

6 February 2027

2b02005

—

Hexan-1-ol

Additive composition

Hexan-1-ol

Characterisation of the active substance

Hexan-1-ol

Produced by chemical synthesis

Purity: min. 96,5 %

Chemical formula: C6H14O

CAS number 111-27-3

FLAVIS 02.005

Method of analysis (1)

For the determination of Hexan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b02006

—

Octan-1-ol

Additive composition

Octan-1-ol

Characterisation of the active substance

Octan-1-ol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C8H18O

CAS number 111-87-5

FLAVIS 02.006

Method of analysis (1)

For the determination of Octan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b02007

—

Nonan-1-ol

Additive composition

Nonan-1-ol

Characterisation of the active substance

Nonan-1-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C9H20O

CAS number 143-08-8

FLAVIS 02.007

Method of analysis (1)

For the determination of Nonan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b02008

—

Dodecan-1-ol

Additive composition

Dodecan-1-ol

Characterisation of the active substance

Dodecan-1-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C12H26O

CAS number 112-53-8

FLAVIS 02.008

Method of analysis (1)

For the determination of Dodecan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b02021

—

Heptan-1-ol

Additive composition

Heptan-1-ol

Characterisation of the active substance

Heptan-1-ol

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C7H16O

CAS number 111-70-6

FLAVIS 02.021

Method of analysis (1)

For the determination of Heptan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b02024

—

Decan-1-ol

Additive composition

Decan-1-ol

Characterisation of the active substance

Decan-1-ol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C10H22O

CAS number 112-30-1

FLAVIS 02.024

Method of analysis (1)

For the determination of Decan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b02040

—

Pentan-1-ol

Additive composition

Pentan-1-ol

Characterisation of the active substance

Pentan-1-ol

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C5H12O

CAS number 71-41-0

FLAVIS 02.040

Method of analysis (1)

For the determination of Pentan-1-ol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b02078

—

Ethanol

Additive composition

Ethanol

Characterisation of the active substance

Ethanol

Produced by chemical synthesis or enzymatic fermentation.

Purity: min. 95 %

Chemical formula: C2H6O

CAS number 64-17-5

FLAVIS 02.078

Method of analysis (1)

For the determination of Ethanol in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05001

—

Acetaldehyde

Additive composition

Acetaldehyde

Characterisation of the active substance

Acetaldehyde

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C2H4O

CAS number 75-07-0

FLAVIS 05.001

Method of analysis (1)

For the determination of Acetaldehyde in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05002

—

Propanal

Additive composition

Propanal

Characterisation of the active substance

Propanal

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C3H6O

CAS number 123-38-6

FLAVIS 05.002

Method of analysis (1)

For the determination of Propanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05003

—

Butanal

Additive composition

Butanal

Characterisation of the active substance

Butanal

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C6H8O

CAS number 123-72-8

FLAVIS 05.003

Method of analysis (1)

For the determination of Butanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05005

—

Pentanal

Additive composition

Pentanal

Characterisation of the active substance

Pentanal

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C5H10O

CAS number 110-62-3

FLAVIS 05.005

Method of analysis (1)

For the determination of Pentanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05008

—

Hexanal

Additive composition

Hexanal

Characterisation of the active substance

Hexanal

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C6H12O

CAS number 66-25-1

FLAVIS 05.008

Method of analysis (1)

For the determination of Hexanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05009

—

Octanal

Additive composition

Octanal

Characterisation of the active substance

Octanal

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C8H16O

CAS number 124-13-0

FLAVIS 05.009

Method of analysis (1)

For the determination of Octanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05010

—

Decanal

Additive composition

Decanal

Characterisation of the active substance

Decanal

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C10H20O

CAS number 112-31-2

FLAVIS 05.010

Method of analysis (1)

For the determination of Decanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05011

—

Dodecanal

Additive composition

Dodecanal

Characterisation of the active substance

Dodecanal

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C12H24O

CAS number 112-54-9

FLAVIS 05.011

Method of analysis (1)

For the determination of Dodecanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05025

—

Nonanal

Additive composition

Nonanal

Characterisation of the active substance

Nonanal

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C9H18O

CAS number 124-19-6

FLAVIS 05.025

Method of analysis (1)

For the determination of Nonanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05031

—

Heptanal

Additive composition

Heptanal

Characterisation of the active substance

Heptanal

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C7H14O

CAS number 111-71-7

FLAVIS 05.031

Method of analysis (1)

For the determination of Heptanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b05034

—

Undecanal

Additive composition

Undecanal

Characterisation of the active substance

Undecanal

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C11H22O

CAS number 112-44-7

FLAVIS 05.034

Method of analysis (1)

For the determination of Undecanal in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b06001

—

1,1-Diethoxyethane

Additive composition

1,1-Diethoxyethane

Characterisation of the active substance

1,1-Diethoxyethane

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C6H14O2

CAS number 105-57-7

FLAVIS 06.001

Method of analysis (1)

For the determination of 1,1-Diethoxyethane in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08001

—

Formic acid

Additive composition

Formic acid

Characterisation of the active substance

Formic acid

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: CH2O2

CAS number 64-18-6

FLAVIS 08.001

Method of analysis (1)

For the determination of Formic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08002

—

Acetic acid

Additive composition

Acetic acid

Characterisation of the active substance

Acetic acid

Produced by chemical synthesis

Purity: min. 99,5 %

Chemical formula: C2H4O2

CAS number 64-19-7

FLAVIS 08.002

Method of analysis (1)

For the determination of Acetic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

1k280

—

Propionic acid

Additive composition

Propionic acid

Characterisation of the active substance

Propionic acid

Produced by chemical synthesis

Purity: min. 99,5 %

Non-volatile residue ≤ 0,01 % when dried at 140 °C to constant weight.

Aldehydes ≤ 0,1 % expressed as formaldehyde

Chemical formula: C3H6O2

CAS number 79-09-4

FLAVIS 08.003

Method of analysis (1)

For the determination of Propionic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08007

—

Valeric acid

Additive composition

Valeric acid

Characterisation of the active substance

Valeric acid

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C5H10O2

CAS number 109-52-4

FLAVIS 08.007

Method of analysis (1)

For the determination of Valeric acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08009

—

Hexanoic acid

Additive composition

Hexanoic acid

Characterisation of the active substance

Hexanoic acid

Produced by chemical modification of extracted fats

Purity: min. 98 %

Chemical formula: C6H12O2

CAS number 142-62-1

FLAVIS 08.009

Method of analysis (1)

For the determination of Hexanoic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08010

—

Octanoic acid

Additive composition

Octanoic acid

Characterisation of the active substance

Octanoic acid

Produced by fermentation followed by fractional distillation.

Purity: min. 97 %

Chemical formula: C8H16O2

CAS number 124-07-2

FLAVIS 08.010

Method of analysis (1)

For the determination of octanoic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08011

—

Decanoic acid

Additive composition

Decanoic acid

Characterisation of the active substance

Decanoic acid

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C10H20O2

CAS number 334-48-5

FLAVIS 08.011

Method of analysis (1)

For the determination of Decanoic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08012

—

Dodecanoic acid

Additive composition

Dodecanoic acid

Characterisation of the active substance

Dodecanoic acid

Produced by chemical synthesis

Purity: min. 90 %

Chemical formula: C12H24O2

CAS number 143-07-7

FLAVIS 08.012

Method of analysis (1)

For the determination of Dodecanoic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08013

—

Oleic acid

Additive composition

Oleic acid

Characterisation of the active substance

Oleic acid

Produced by chemical synthesis

Purity: min. 90 %

Chemical formula: C18H34O2

CAS number 112-80-1

FLAVIS 08.013

Method of analysis (1)

For the determination of Oleic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08014

—

Hexadecanoic acid

Additive composition

Hexadecanoic acid

Characterisation of the active substance

Hexadecanoic acid

Produced by chemical synthesis

Purity: min. 80 %

Chemical formula: C16H32O2

CAS number 57-10-3

FLAVIS 08.014

Method of analysis (1)

For the determination of Hexadecanoic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08016

—

Tetradecanoic acid

Additive composition

Tetradecanoic acid

Characterisation of the active substance

Tetradecanoic acid

Produced by chemical synthesis

Purity: min. 94 %

Chemical formula: C14H28O2

CAS number 544-63-8

FLAVIS 08.016

Method of analysis (1)

For the determination of Tetradecanoic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08028

—

Heptanoic acid

Additive composition

Heptanoic acid

Characterisation of the active substance

Heptanoic acid

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C7H14O2

CAS number 111-14-8

FLAVIS 08.028

Method of analysis (1)

For the determination of Heptanoic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b08029

—

Nonanoic acid

Additive composition

Nonanoic acid

Characterisation of the active substance

Nonanoic acid

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C9H18O2

CAS number 112-05-0

FLAVIS 08.029

Method of analysis (1)

For the determination of Nonanoic acid in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09001

—

Ethyl acetate

Additive composition

Ethyl acetate

Characterisation of the active substance

Ethyl acetate

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C4H8O2

CAS number 141-78-6

FLAVIS 09.001

Method of analysis (1)

For the determination of Ethyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09002

—

Propyl acetate

Additive composition

Propyl acetate

Characterisation of the active substance

Propyl acetate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C5H10O2

CAS number 109-60-4

FLAVIS 09.002

Method of analysis (1)

For the determination of Propyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09004

—

Butyl acetate

Additive composition

Butyl acetate

Characterisation of the active substance

Butyl acetate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C6H12O2

CAS number 123-86-4

FLAVIS 09.004

Method of analysis (1)

For the determination of Butyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09006

—

Hexyl acetate

Additive composition

Hexyl acetate

Characterisation of the active substance

Hexyl acetate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C8H12O2

CAS number 142-92-7

FLAVIS 09.006

Method of analysis (1)

For the determination of Hexyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 25 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09007

—

Octyl acetate

Additive composition

Octyl acetate

Characterisation of the active substance

Octyl acetate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C10H20O2

CAS number 112-14-1

FLAVIS 09.007

Method of analysis (1)

For the determination of Octyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09008

—

Nonyl acetate

Additive composition

Nonyl acetate

Characterisation of the active substance

Nonyl acetate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C11H22O2

CAS number 143-13-5

FLAVIS 09.008

Method of analysis (1)

For the determination of Nonyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09009

—

Decyl acetate

Additive composition

Decyl acetate

Characterisation of the active substance

Decyl acetate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C12H24O2

CAS number 112-17-4

FLAVIS 09.009

Method of analysis (1)

For the determination of Decyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09010

—

Dodecyl acetate

Additive composition

Dodecyl acetate

Characterisation of the active substance

Dodecyl acetate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C14H28O2

CAS number 112-66-3

FLAVIS 09.010

Method of analysis (1)

For the determination of Dodecyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09022

—

Heptyl acetate

Additive composition

Heptyl acetate

Characterisation of the active substance

Heptyl acetate

Produced by chemical synthesis

Purity: min. 97,5 %

Chemical formula: C9H18O2

CAS number 112-06-1

FLAVIS 09.022

Method of analysis (1)

For the determination of Heptyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09023

—

Methyl acetate

Additive composition

Methyl acetate

Characterisation of the active substance

Methyl acetate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C3H6O2

CAS number 79-20-9

FLAVIS 09.023

Method of analysis (1)

For the determination of Methyl acetate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09038

—

Methyl butyrate

Additive composition

Methyl butyrate

Characterisation of the active substance

Methyl butyrate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C5H10O2

CAS number 623-42-7

FLAVIS 09.038

Method of analysis (1)

For the determination of Methyl butyrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09042

—

Butyl butyrate

Additive composition

Butyl butyrate

Characterisation of the active substance

Butyl butyrate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C8H16O2

CAS number 109-21-7

FLAVIS 09.042

Method of analysis (1)

For the determination of Butyl butyrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09044

—

Pentyl butyrate

Additive composition

Pentyl butyrate

Characterisation of the active substance

Pentyl butyrate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C9H18O2

CAS number 540-18-1

FLAVIS 09.044

Method of analysis (1)

For the determination of Pentyl butyrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09045

—

Hexyl butyrate

Additive composition

Hexyl butyrate

Characterisation of the active substance

Hexyl butyrate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C10H20O2

CAS number 2639-63-6

FLAVIS 09.045

Method of analysis (1)

For the determination of Hexyl butyrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09046

—

Octyl butyrate

Additive composition

Octyl butyrate

Characterisation of the active substance

Octyl butyrate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C12H24O2

CAS number 110-39-4

FLAVIS 09.046

Method of analysis (1)

For the determination of Octyl butyrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09059

—

Ethyl decanoate

Additive composition

Ethyl decanoate

Characterisation of the active substance

Ethyl decanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C12H24O2

CAS number 110-38-3

FLAVIS 09.059

Method of analysis (1)

For the determination of Ethyl decanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09060

—

Ethyl hexanoate

Additive composition

Ethyl hexanoate

Characterisation of the active substance

Ethyl hexanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C8H16O2

CAS number 123-66-0

FLAVIS 09.060

Method of analysis (1)

For the determination of Ethyl hexanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09061

—

Propyl hexanoate

Additive composition

Propyl hexanoate

Characterisation of the active substance

Propyl hexanoate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C9H18O2

CAS number 626-77-7

FLAVIS 09.061

Method of analysis (1)

For the determination of Propyl hexanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09065

—

Pentyl hexanoate

Additive composition

Pentyl hexanoate

Characterisation of the active substance

Pentyl hexanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C11H22O2

CAS number 540-07-8

FLAVIS 09.065

Method of analysis (1)

For the determination of Pentyl hexanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09066

—

Hexyl hexanoate

Additive composition

Hexyl hexanoate

Characterisation of the active substance

Hexyl hexanoate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C12H24O2

CAS number 6378-65-0

FLAVIS 09.066

Method of analysis (1)

For the determination of Hexyl hexanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09069

—

Methyl hexanoate

Additive composition

Methyl hexanoate

Characterisation of the active substance

Methyl hexanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C7H14O2

CAS number 106-70-7

FLAVIS 09.069

Method of analysis (1)

For the determination of Methyl hexanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09072

—

Ethyl formate

Additive composition

Ethyl formate

Characterisation of the active substance

Ethyl formate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C3H6O2

CAS number 109-94-4

FLAVIS 09.072

Method of analysis (1)

For the determination of Ethyl formate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09099

—

Ethyl dodecanoate

Additive composition

Ethyl dodecanoate

Characterisation of the active substance

Ethyl dodecanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C14H28O2

CAS number 106-33-2

FLAVIS 09.099

Method of analysis (1)

For the determination of Ethyl dodecanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09104

—

Ethyl tetradecanoate

Additive composition

Ethyl tetradecanoate

Characterisation of the active substance

Ethyl tetradecanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C16H32O2

CAS number 124-06-1

FLAVIS 09.104

Method of analysis (1)

For the determination of Ethyl tetradecanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09107

—

Ethyl nonanoate

Additive composition

Ethyl nonanoate

Characterisation of the active substance

Ethyl nonanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C11H22O2

CAS number 123-29-5

FLAVIS 09.107

Method of analysis (1)

For the determination of Ethyl nonanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09111

—

Ethyl octanoate

Additive composition

Ethyl octanoate

Characterisation of the active substance

Ethyl octanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C10H20O2

CAS number 106-32-1

FLAVIS 09.111

Method of analysis (1)

For the determination of Ethyl octanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09121

—

Ethyl propionate

Additive composition

Ethyl propionate

Characterisation of the active substance

Ethyl propionate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C5H10O2

CAS number 105-37-3

FLAVIS 09.121

Method of analysis (1)

For the determination of Ethyl propionate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09134

—

Methyl propionate

Additive composition

Methyl propionate

Characterisation of the active substance

Methyl propionate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C4H8O2

CAS number 554-12-1

FLAVIS 09.134

Method of analysis (1)

For the determination of Methyl propionate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09147

—

Ethyl valerate

Additive composition

Ethyl valerate

Characterisation of the active substance

Ethyl valerate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C7H14O2

CAS number 539-82-2

FLAVIS 09.147

Method of analysis (1)

For the determination of Ethyl valerate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09148

—

Butyl valerate

Additive composition

Butyl valerate

Characterisation of the active substance

Butyl valerate

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C9H18O2

CAS number 591-68-4

FLAVIS 09.148

Method of analysis (1)

For the determination of Butyl valerate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09191

—

Ethyl hex-3-enoate

Additive composition

Ethyl hex-3-enoate

Characterisation of the active substance

Ethyl hex-3-enoate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C8H14O2

CAS number 2396-83-0

FLAVIS 09.191

Method of analysis (1)

For the identification of Ethyl hex-3-enoate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09193

—

Ethyl hexadecanoate

Additive composition

Ethyl hexadecanoate

Characterisation of the active substance

Ethyl hexadecanoate

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C18H36O2

CAS number 628-97-7

FLAVIS 09.193

Method of analysis (1)

For the determination of Ethyl hexadecanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09248

—

Ethyl trans-2-butenoate

Additive composition

Ethyl trans-2-butenoate

Characterisation of the active substance

Ethyl trans-2-butenoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C6H10O2

CAS number 623-70-1

FLAVIS 09.248

Method of analysis (1)

For the identification of Ethyl trans-2-butenoate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09274

—

Ethyl undecanoate

Additive composition

Ethyl undecanoate

Characterisation of the active substance

Ethyl undecanoate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C13H26O2

CAS number 627-90-7

FLAVIS 09.274

Method of analysis (1)

For the determination of Ethyl undecanoate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09449

—

Butyl isovalerate

Additive composition

Butyl isovalerate

Characterisation of the active substance

Butyl isovalerate

Produced by chemical synthesis

Purity: min. 97 %

Chemical formula: C9H18O2

CAS number 109-19-3

FLAVIS 09.449

Method of analysis (1)

For the identification of Butyl isovalerate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09478

—

Hexyl isobutyrate

Additive composition

Hexyl isobutyrate

Characterisation of the active substance

Hexyl isobutyrate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C10H20O2

CAS number 2349-07-7

FLAVIS 09.478

Method of analysis (1)

For the identification of Hexyl isobutyrate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09483

—

Methyl 2-methylbutyrate

Additive composition

Methyl 2-methylbutyrate

Characterisation of the active substance

Methyl 2-methylbutyrate

Produced by chemical synthesis

Purity: min. 92 %

Chemical formula: C6H12O2

CAS number 868-57-5

FLAVIS 09.483

Method of analysis (1)

For the identification of Methyl 2-methylbutyrate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09507

—

Hexyl 2-methylbutyrate

Additive composition

Hexyl 2-methylbutyrate

Characterisation of the active substance

Hexyl 2-methylbutyrate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C11H22O2

CAS number 10032-15-2

FLAVIS 09.507

Method of analysis (1)

For the identification of Hexyl 2-methylbutyrate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09512

—

Triethyl citrate

Additive composition

Triethyl citrate

Characterisation of the active substance

Triethyl citrate

Produced by chemical synthesis

Purity: min. 99 %

Chemical formula: C12H20O7

CAS number 77-93-0

FLAVIS 09.512

Method of analysis (1)

For the determination of Triethyl citrate in the feed additive and in feed flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be 5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09529

—

Hexyl isovalerate

Additive composition

Hexyl isovalerate

Characterisation of the active substance

Hexyl isovalerate

Produced by chemical synthesis

Purity: min. 95 %

Chemical formula: C11H22O2

CAS number 10032-13-0

FLAVIS 09.529

Method of analysis (1)

For the identification of Hexyl isovalerate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

2b09549

—

Methyl 2-methylvalerate

Additive composition

Methyl 2-methylvalerate

Characterisation of the active substance

Methyl 2-methylvalerate

Produced by chemical synthesis

Purity: min. 98 %

Chemical formula: C7H14O2

CAS number 2177-77-7

FLAVIS 09.549

Method of analysis (1)

For the identification of Methyl 2-methylvalerate in the feed additive and flavouring premixtures:

Gas chromatography mass spectrometry with retention time locking GC-MS-RTL.

All animal species

—

1.	The additive shall be incorporated into the feed in the form of a premixture.

2.	In the directions for use of the additive and premixtures, the storage and stability conditions shall be indicated.

3.	The recommended maximum content of the active substance shall be: for pigs and poultry: 1 mg/kg, and for all other species and categories: 1,5 mg/kg of complete feedingstuff with a moisture content of 12 %.

4.	On the label of the additive, the recommended maximum content of the active substance in complete feed shall be indicated.

5.	Where the maximum recommended content is exceeded; the name of the functional group, the name of the additive, the identification number and the added amount of the active substance shall be indicated on the labelling of the premixtures, feed materials and compounds feedingstuff.

6 February 2027

(1) Details of the analytical methods are available at the following address of the European Union Reference Laboratory for Feed Additives: https://ec.europa.eu/jrc/en/eurl/feed-additives/evaluation-reports